THE CANNABIS THREAD 101!!

roots69

Support BGOL
Registered
hydroponics-marijuana-grow-guide.jpg

Hydroponics Marijuana Grow Guide

When marijuana growing expert Michael Straumietis visits marijuana gardens to help growers maximize plant health and harvest yield, the first thing he does is a safety check.

He’s looking for defective equipment, hazardous chemicals, and conditions that create risk of electrocution or fire.

Straumietis wants to make sure the electrical supply is adequate for indoor lights, air conditioning and other hydroponics cannabis growing equipment.

After he’s done the safety inspection, Straumietis turns his attention to grow room efficiency, productivity, and profits.

He wants to decrease electricity consumption and increase grams per watt, for maximum cost-effectiveness and profits.

Straumietis pays careful attention to whether a marijuana grow room has adequate air exchange.

For growers who want the ultimate in cannabis grow room control, he recommends asealed grow room (Controlled Environment Agriculture) approach that doesn’t directly exchange grow room air with outside air.

He tells growers to use oscillating fans so a gentle breeze can be felt in all areas of the plant canopy at all times.

Adequate air movement helps marijuana plants “breathe” CO2 properly and also decreases problems with airborne molds, fungi, or other predators.

Straumietis explains that molds, mildews, diseases, fungi and pests vector into your marijuana grow op through air exchange, as well as through garden visitors and on tools and equipment.

He advises marijuana growers to have at least twice a year when you remove all cannabis plants and equipment from your hydroponics marijuana grow space.

During that time, you disinfect the walls, ceilings, ducts, and floors, and also disinfect anything that touches marijuana plants (pots, etc.) or touches the water your cannabis plants are fed with.

Straumietis, founder and owner of hydroponics nutrients manufacturer Advanced Nutrients, examines garden humidity, temperature, light intensity, light on-off cycles, C02 levels, distance from lights to top of plant canopy and other factors to ensure that the marijuana plants are in the perfect situation.

He especially urges cannabis growers to use only the highest quality water.

Many municipal water supplies contain chlorine, chloramine, toxins, heavy metals, salts, microbes and other impurities that harm or even kill plants, Straumietis says.

He recommends reverse osmosis filtration unless you are able to harvest clean rainwater.

Straumietis greatly increases marijuana growers’ harvest weight and cannabinoid percentages by manufacturing Advanced Nutrients feed programs including automatic ph-balancing hydroponics base nutrients along with bloom boosters, root zone microbes, immune system boosters, carbohydrates, vitamins, fermented organics, and predator-defeat formulas.

Another important fact: for successful marijuana growers, it’s about quality, not just quantity.

When Straumietis noticed that a grower’s buds tasted harsh and bitter, he advised the grower to do a flush, and then add Bud Candy and Nirvana to the grower’s bloom phase feed program.

He further enhanced the grower’s cannabis crop value and quality by explaining how to properly dry and cure harvests.

Many marijuana growers do everything right during their grow and bloom phases, Straumietis says.

“But then they ruin the value and smokeability of their marijuana harvest by rushing the drying and curing process, or by drying buds in areas with high humidity, temperatures below 64 F or above 80 F, or where pollutants, molds, and fungi can settle on the buds as they cure,” he notes.

Here’s what Straumietis says are the biggest problems and mistakes marijuana growers should recognize and overcome:

  • Improper pH and PPM (remediated by using pH Perfect hydroponics base nutrients).
  • Grow room temperature or nutrients solution temperature too hot or too cold.
  • Lights too close to cannabis plant canopy; uneven plant canopy.
  • Hydroponics marijuana plants crowded together and/or inadequate lighting so light penetration and intensity aren’t adequate for max growth.
  • Crowded cannabis plants that don’t get enough ventilation.
  • Cold floors that harm roots.
  • Failure to monitor hydroponics marijuana plants and grow systems at least once a day.
  • Growers not familiar with how nutrient problems and pests and diseases affect plants and/or not doing enough to stop problems as soon as they can be detected.
  • Not using HID High Pressure Sodium Lighting (HPS) during bloom phase (trying to get by with LEDs or T5s, etc.).
  • Poor air movement, room ventilation and air filtration.
  • Poor security systems; security risks caused by letting other people know you grow cannabis.
  • Letting dogs in grow rooms/smoking cigarettes in grow rooms (vectors for disease).
  • Not putting reflecting material on walls and ceiling.
  • Not covering marijuana grow room floor with waterproof material.
  • Use of inferior fertilizers, especially those that create unstable pH.
  • Using HID bulbs that are worn out and underproducing.
  • Overwatering/Underwatering/Overfertilizing/Underfertilizing.
  • Poor marijuana garden hygiene and maintenance, especially as regards cleaning hydroponics reservoir and keeping drip emitters and other equipment unclogged.
  • Use of poorly-made organic nutrients that create disease and smell.
  • Augmented C02 removed from room during ventilation.
Straumietis says his 30+ years of hydroponics marijuana growing experience reveal that marijuana growers get much higher yields and potency if they follow the advice provided in this article!
 

roots69

Support BGOL
Registered
marijuana-buds.jpg

How You Can Grow 3+ Pounds of Marijuana Buds Per Light, Part One

How many pounds per light are you getting from your marijuana garden?

Michael Straumietis, founder of hydroponics nutrients company Advanced Nutrients and a long-time cannabis grower and researcher, says you can grow 3+ pounds per light!

Straumietis is so serious about helping you increase your yields and fix any grow op problems you might have that he created a special grower education website just for you.

“Thirty years ago, people were happy with a pound per 1000-watt light,” Straumietis says. “Then Advanced Nutrients designed a feed program that lifted yield to two-plus per light and everybody went crazy. But now we’re looking at three-plus pounds per light!”

In this first article of a two-part exclusive series, Straumietis gives insider details so you too can get three pounds or more of dried marijuana buds per 1000-watt light.

Indoor Hydroponics Grow Room Lighting
Use highest-quality bulbs and reflectors. Light movers are very useful to increase overall penetration. Coverage area for a 1000-watt HID light is approximately 16-21 square feet. “Make sure your walls are highly reflective so all the light gets bounced back to your plants,” Straumietis says.

Add C02 for More Marijuana Buds Per Light
C02: Add C02 to achieve 1200 parts per million (ppm) carbon dioxide levels in your grow room starting midway through grow phase to end of bloom phase during lights-on cycle.

Read this article for safety tips about using C02 in your marijuana grow room.

Root Zone & Hydroponics Systems for 3+ Pounds of Marijuana Buds Per Light
Deep water culture, aeroponics, NFT are the most productive systems for growing cannabis. Rockwool, coco coir, soilless mix are next best. Always use aerated, chilled reverse osmosis water (water temperature 68F). Use insulated nutrients reservoir. Keep light out of reservoir to prevent algae.

Grow Room Environment, Climate, Air Handling
Sealed grow room preferable. At least 1-2 aeration fans per 1000-watt light to create visible breeze in canopy at all times. Use scrubbers, silencers. Lights-on temperatures without C02: 74F. Lights-on temperatures with C02: 84F. Relative humidity: No more than 62% grow phase. No more than 58% bloom phase. Use Ideal Air brand dehumidifier.

Marijuana Strains for 3+ Pounds Marijuana Buds Per Light
Use high-yielding marijuana strains. These will have at least 20-30% Indica genetics. Feminized cannabis seeds produce lower yields. Grow from unfeminized marijuana seeds or from proven clones grown from unfeminized marijuana seeds. Read here to see a list of high-yielding marijuana strains.

Topping, Plant Spacing & Support
Top your plants at least once during grow phase, at least 1-2 weeks before flipping plants into bloom. Use SCROG, stakes, or plant cages to support heavy buds.

Keep plants from touching each other if possible.

Rotate plants if possible to give them full exposure to your lighting.

3+ Pounds Per Light Hydroponics Nutrients Feed Program
Advanced Nutrients pH Perfect Sensi, Coco, or Connoisseur base nutrients grow phase and bloom phase.

Bloom phase supplements in order of use (see label instructions or contact Advanced Nutrients grower support): Bud Ignitor. Bud Candy. Big Bud. B-52. Nirvana. SensiZym. Bud Factor X. Rhino Skin. Overdrive.

Use Piranha, Tarantula, Voodoo Juice beneficial microbes throughout grow phase and until peak bloom phase.

After plants are established as seedlings or clones, start with a 600-700 ppm feed program and go up to 1200 ppm during grow phase while checking for overfeeding by monitoring runoff ppm.

When grow phase runoff ppm goes above 1900 ppm and/or if plants are showing leaf-tip burn (a sign of overfeeding), do a one-day flush.

During bloom phase, switch to bloom phase hydroponics base nutrients and supplement nutrients starting at 600 ppm, increasing to 950-1500 when flowers are set, and depending on how your marijuana plants handle it.

When runoff ppm goes over 1800 ppm, do a one-cycle flush.

A week before harvest, use only Flawless Finish and reverse osmosis water for a one-week flush.

“I’ve studied more than a dozen professional grow rooms where they’re getting three pounds or more dried and cured marijuana buds per light,” Straumietis says. “Come back for the next article and I’ll give you more details so you get that same level of gargantuan yields.”
 

roots69

Support BGOL
Registered
bbm-11-08-2016-resized.jpg
Read this article and you’ll know how to make marijuana e-cig oil!
How to Make Marijuana E-Cig Oil for Electronic Cigarettes & Vape Pens

Using marijuana oil in an e-cig (electronic cigarette) device is gaining popularity.

In some places you might even inhale cannabis oil in an e-cig in public but most people wouldn’t know you’re using cannabis.

It’s convenient, and there’s no combustion. It’s stealth cannabis.

If you live where there are legal marijuana dispensaries, you’re might be lucky enough to pay premium prices for superb commercial-grade marijuana e-cig oil.

But prices are high, and that’s one reason we start making our own marijuana e-cig oil.

In this article, we’re giving you a basic guide easy to follow guide to making safe, clean e-cig oil, but we ask you to watch all the videos in this article before you start making e-cig oil and loading it into your e-cig or vape device.

And we caution you that even though extracting cannabinoids to make e-cig oil doesn’t involve butane or other risks, it does involve a heated oven, stovetop, hot water, cannabis, etc.

Always put SAFETY first when doing any extracting, cooking, or other processing of cannabis using heat and/or solvents!



Steps For Making E-Cig Oil From Buds

  1. Have at least one ounce of finely-ground dried buds in a clean, covered stainless steel container. Leave the cover slightly ajar so air can escape. Covering with aluminum foil is a good idea rather than using a container lid.
  2. Heat buds in a clean oven at 200 Fahrenheit for 37 minutes.
  3. Prepare an extraction solution of the absolutely finest pure, food-grade vegetable glycerin (VG) and propylene glycol (PG) at a ratio of two parts VG to one part PG. Look here for more info.
  4. Use six milliliters of this solution per gram of bud for a relatively strong marijuana e-cig oil. Put this solution into a stainless steel or glass container.
  5. Take heated bud and pour it into the VG/PG solution. Make sure there’s one quarter inch of solution over the top of the bud.
  6. Keep the jar or stainless steel container covered but be sure air can escape, and place it almost submerged in heated water (or an oven) maintained at 150F for three hours. Use a kitchen thermometer when following steps in this process.
  7. During three hours when the mixture is heated at 150F, shake container vigorously for three minutes every twenty minutes.
  8. After the three hours of heating and agitation, all floral material must be strained out of the oil. Most people use a fine sieve or cheese cloth to do this.
  9. Be sure to squeeze and press the material to get all the oil out. Work to prevent even a speck of source material of getting into your marijuana e-cig oil.
  10. You want your e-cig oil to be pure cannabinoids, and carrier material, and that’s it.
  11. For connoisseur oil that packs a punch and tastes great, use only the finest bud, propylene glycol, and vegetable glycerin.
  12. Use careful quality control. Insist on making THC rich honey e-cig oil that delivers as much THC in one inhalation as is contained in three or more joints!
  13. Put the finished oil into a sanitized glass or stainless steel container and keep it in the NON-FREEZER part of your refrigerator.
  14. When ready to get super high, load finished oil into e-cig cartridges, into your e-cig or vape pen, and enjoy.
  15. Store your marijuana e-cig oil in a dark place at 38-65 degrees Fahrenheit.
  16. It will last approximately five months at full strength.



Even More Marijuana E-Cig Oil Information!

  1. Make even more potent marijuana e-cig oil using kief, bubblehash, shatter, or dry sift instead of bud. Adjust your ratios to 20-30 ml of VG/PG solution per one gram of material. The precise ratio depends on how strong your kief, bubblehash, shatter, or dry sift is.
  2. As with cooking with cannabis, feel free to experiment with timing and extraction material to cannabis ratios to see what makes the most potent and tasty marijuana e-cig oil for you.
  3. What we’ve heard is that it’s real important to maintain that sweet spot of extract temperature at 200F for the preparatory oven phase, and then around 150F for the three hour heating/agitation phase.
  4. The skill is in cooking at just the right temps and lengths of time to extract maximum amount of cannabinoids and terpenoids, converting as much material to psychoactive form as possible.
  5. Some people add flavorings to their marijuana e-cig oil. Be sure to use only organic, certified food grade such as you find here.
  6. Each time you sample a new batch for the first time, take only one hit from your marijuana e-cig oil and then wait 15 minutes to see how it affects you.
  7. Marijuana e-cig oil can also be used as a tincture under the tongue.
  8. For aphrodisiac cannabis sexual ecstasy, use the oil inside a woman’s vagina or anus (see here for more details).
  9. Take a look here at the vast array of marijuana vape pens, and e-cig oil devices. Some can be used for dabs, etc. They can cost a lot of money and they don’t always work well. Ask lots of questions before you buy.
  10. Watch the how-to videos embedded in this article…
Please note that this information is for educational purposes only, and is not meant to encourage anyone to break the law or put themselves at risk in any way.
 

roots69

Support BGOL
Registered
strategies_for_selling_cannabis-2.jpg

Hone Your Cannabis Craft With These Simple Steps To Customer Satisfaction

As a marijuana grower who runs a craft cannabis business serving several marijuana consumers, I liken myself to a restaurateur or chef planning a customized menu for diners who’ve specified the foods they love to eat and their dietary requirements.

Any grower who provides cannabis to non-growers should understand how to give customers what they want, and learn how to plan a cannabis grow-op menu that offers a diverse range of strains ideal for each client.

Every consumer interacts with cannabis idiosyncratically. One size doesn’t fit all. As a grower, I’ve committed to providing custom-grown strains and a few processed cannabis concentrate products.

What’s more, I discovered that sincerely paying attention to what my bud buddies want from their cannabis experience is a portal to increasing grow success. The key factor is that understanding my customers guides what I grow, when I grow it.

The first thing I do at the start of every grow season is create and consult a brief biography of each of my customers, with emphasis on their cannabis preferences and consumption patterns. This helps with my marijuana seasonal planning and how I match my grow-room choices to my clientele’s needs.

Following is an anonymized excerpt of my customers’ cannabis biographies, which helps me plan my grow and map out my overheads.

The Customer Who Vapes Cannabis For Relaxation
Anna is a 43-year-old fitness coach, part-time university professor, and competing triathlete. She consumes cannabis primarily to decrease chronic pain from her athletic regimen and competitions, as well as to relax.

I’ve provided her with samples of heavy indicas, 50-50 indica and sativa crosses, Kush strains, sativa strains, and a high CBD. She prefers the 50-50 strains.

Anna’s consumption rate is one half ounce to one ounce per month, which she consumes through vaporization. She’s a steady customer who pays cash and is always willing to meet me in a safe public place to exchange buds for money. She’s reported that the cannabis advice I’ve provided has helped her train more energetically so she performs better in triathlons.

The Customer Who Takes Edibles For Pain Management
Jacob is a 69-year-old retired electrical engineer. I have great empathy for this guy, due to the chronic pain he experiences. Having been hit broadside in his car by a drunk driver, the injuries will always cause Jacob lingering pain, pins and needles, and encroaching arthritis. He’s admitted worry about his growing reliance on harsh painkillers.

By the time I first met him, Jacob was already an enthusiastic believer in the positive effects of medical marijuana, having conducted research of his own.

He only wanted pure indica and pure Kush, and it had to be sticky and tasty, too. He needed it for pain relief and sedation to replace over-the-counter and opiate painkillers. Jacob knew weed worked because someone had shared some cannabis with him and it quickly offered a different and less-debilitating pain relief than he had felt for a long time.

On the occasion when Jacob had suffered through a follow-up surgery and was in serious pain, I suggested marijuana medibles would be a better option than inhaling cannabis, because consuming marijuana orally so that it’s processed through the liver provides a long-lasting body high.

I sold him jars of my homemade marijuana coconut oil extract. Making marijuana extracts requires more time, cost and money, on top of the expenditure for growing the bud used as a base, and I charged him accordingly.

I provided Jacob a pint jar of cannabis coconut oil every three weeks. The pint contained the extracted cannabinoids and terpenoids from an ounce of cannabis. Consuming a tablespoon or even less of this product on an empty stomach every 7–10 hours, Jacob vanquished chronic pain more successfully than when he used opiates and steroids.

Later, when those acute post-surgical pains and complications receded somewhat, I suggested he wean himself off the medible cannabis. I was concerned about the effects on his liver; medibles put a load on the organ as the liver converts THC from Delta-9 to Delta-11 compound form. That conversion is why the edible high is so different than the inhaled and combusted or vaporized high — edibles turn into Delta-11, its own proprietary entourage of effects.

It’s also true that medibles have overall body and mind effects that may interfere with physical activity and cognitive function. Most of us have eaten a stronger dose or more edibles than we intended, and have consequently been laid out for a few hours, able only to surrender to the huge dose of Delta-11, eat something, and wait a few hours for the sledgehammer effects to wear off.

The bottom line was that Jacob wanted to transition back to inhaling cannabis rather than consuming the oil concentrate. My suggestion was for him to get a vaporizer and consume a gram or less of vaporized cannabis as needed. I gave him three strain samples to choose from and advised him to explore and monitor vaporizer temperatures, from 310°F to no higher than about 425°F to see the range of highs and tastes from each temperature.

Jacob experimented with three strains and his new vape, and we measured his consumption rate and amount. I logged in to my planning paradigm that Jacob needs 45 grams of indica per month.

The Customer Who Likes Bubble Hash For Creativity
Jenna, a 29-year-old performance artist, singer-songwriter and graduate student, uses cannabis to stimulate creativity, sexual pleasure, dancing at raves and clubs, and overall mental clarity.

I gave her bud samples to try and her favorite was a pure sativa strain I’d grown nearly a year earlier and had stored in my freezer.

Her preference for this particular strain significantly impacted my marijuana growing plans, because pure sativa strains have a much longer bloom phase than most hybrids, and because they’re more difficult to grow, especially when I’m growing shorter marijuana hybrids at the same time.

Before I committed to be Jenna’s cannabis provider, I calculated the extra cost per ounce that growing pure sativa justified. It would take me 4–5 months for me to grow, harvest, cure and dry the sativa strain, and so I asked Jenna to agree verbally to be a customer for that strain when it was ready. She did agree, but was worried about what to do in the meantime.

To provide her the cannabinoids, terpenoids and stimulating marijuana effects she needed in the interim, I suggested nonsolvent, mechanically produced cannabis concentrates such as dry sift marijuana concentrate and bubble hash, which would be easier to transport and use, and more stimulating than inhaling whole-flower cannabis.

I also schooled Jenna on vaporizer temperature and effects, explaining how one uses precision vaporizer temperature controls to gauge which cannabinoids and terpenoids to inhale.

At higher vaporizer temperatures (390°F and above) you inhale the full entourage of cannabinoids and terpenoids in the bud, including CBD (cannabidiol) and CBN (cannabinol), both of which tend to blunt the THC high that produces psychedelia, euphoria and stimulation.

At lower vaporizer temperatures (from 320–390°F), you inhale mostly THC and are leaving much if not all of the CBD and CBN in the bud. When most of your high comes from vaporized THC without the mitigating effects of other cannabinoids and terpenoids, you get a clearer, more energetic high. Similarly, when you vaporize instead of combust, your high is cleaner physically and psychologically.

Dry sift or bubble hash are easier and stealthier to consume, which was important to Jenna because she wanted to get high just before she went onstage as a performer, or when she arrived at a rave and was ready to dance. In those situations, the odor and practicalities of inhaling dried bud are less copacetic than inhaling dry sift or bubble hash.

She’d never tried dry sift or bubble hash, so we did sampling sessions. She was immediately enthusiastic about the one-hit aspect of cannabis concentrates, the convenience and safety of carrying odorless product, and the stimulating, intense high compared to whole-bud cannabis.

I was able to provide Jenna with the concentrates until the pure sativa’s 12-week bloom phase was finished. She loved the effects of pure sativa buds, and requested I make dry sift and bubble hash from those buds.

As always, when I calculate my pricing, I take into account the baseline cost per ounce, and then add up the costs in terms of time, bud, and expertise to further process flower into concentrates. When I truly listen to my customers and meet their needs, they don’t go looking for cannabis elsewhere, and they gladly pay whatever I ask.

The Customer Who Wants To Grow His Own But Can’t
Tim is a tax attorney who’d like to grow his own weed, but is unable to safely and prudently do it. For one thing, Tim has four children — all aged under 15. His wife doesn’t like cannabis, which is a source of great despair for him. And if he was ever caught growing, he’d lose his law license. For these reasons, he depends on me to grow for him.

Tim educated me about the harsh realities of being an attorney. It’s a high-pressure job that for him includes 12-hour days trapped behind a desk conducting legal research, arguing with people, and sitting in meetings with clients and adversaries.

When he gets home, Tim has a family wanting his undivided attention. Thus, he has almost no opportunity to relax, exercise, unwind and rejuvenate himself. Tim admits that if he doesn’t have the right kind of marijuana at hand, he experiences headaches, insomnia, stress disorders, bouts of anger, and his hands start to shake.

Given the amount of pressure he’s under, I can well understand why Tim needs a safe, plant-based medicine to help him cope with life’s demands.

Tim used to roll joints that he’d take a couple of hits from while driving to work. He’d slip out at lunch to do the same thing, always careful to use scented products and breath mints to mask the odor.

I talked him into using vaporizers, but I also went the extra mile, and after learning how to make cannabis tinctures, I made him something that hits hard and fast and leaves no vapor or smoky smell. Green dragon is a super-potent cannabis concentrate tincture that uses Everclear to deliver cannabinoids and terpenoids into the bloodstream and brain in about two minutes, with no combustion or vaporization needed.

So now he buys buds from me, and also buys the green dragon tincture. Tim prefers indica, Afghanica, and Kush-dominant cannabis, but wants strains that include some sativa so he’s not comatose at work or at home. He’s an especially good customer because from time to time he hooks me up with some of his trusted wealthy lawyer friends who want cannabis on an intermittent rather than routine basis.

Tim never complains about prices, and on more than one occasion has given me a bonus payment because my buds and tincture have helped keep him sane and affable as he tackles career and family responsibilities.

Guide Your Grow With A Commitment To Cannabis Consumers
These consumer biographies provide relevant data and a good starting point for planning my seasonal and annual grow-op rotations. I examine the kinds of marijuana the customers want, what form they want their cannabis in, how much dry-weight cannabis I need to produce, and how often.

I add in my own cannabis needs and also look at my mother plants, seeds inventory, and create a grid showing what I’ll grow, for whom, how much, and why. I also calculate the value of my time processing buds into cannabis concentrates and tinctures.

What I love about my cannabis customers is that their desire for the perfect high is a catalyst for my research and efforts to breed new strains, grow strains I wouldn’t otherwise have grown, and learn to make a wider variety of processed cannabis products.

If I have a potential customer who makes snarky comments about my fees, I disengage and cut that person off.

What makes me feel warm and fuzzy is that I’ve had customers tell me that even though they had the option to go to marijuana dispensaries, they won’t because I treat them so well. Trust me on this, that kind of customer satisfaction keeps your marijuana grow business stable and predictable.

And just like a master chef gets a warm sense of fulfillment whenever they look out on a thriving restaurant dining floor filled with happy, well-fed diners, the marijuana grower also take pride in helping their customers reduce pain and increase pleasure.
 

roots69

Support BGOL
Registered
7_reasons_to_grow_marijuana.png
When you grow your own, you create the best highs, initially a few lows, but a better life, too.
You Can Grow Your Own Way: Here’s Why Growing Your Own Cannabis is Better than Buying It

Like other Colorado cannabis consumers, Trevor was a self-described weedhead who celebrated when medical and recreational marijuana were legalized in his home state in 2000 and 2012, respectively.

He thought legalization would decrease his marijuana costs, give him alternatives to the cannabis black market, and greatly increase the variety of cannabis products he could buy.

But like many other people, Trevor found that marijuana legalization wasn’t everything he’d hoped it would be.

“I’ve been to marijuana shops in Nederland, Denver, Boulder and Aurora. They have awesome medibles, candies, drinks, tinctures and dabs, but what I really wanted was premium buds. The dispensary bud was dry and crumbly, and the prices were too high. That’s why I decided to grow my own,” Trevor said.

Despite having easy legal access to retail marijuana, Trevor is now a marijuana cultivator. And even though there was a steep learning curve and the typical trials and errors you might expect when first starting out, he’s never regretted his decision to essentially become what is a small-scale, independent farmer in a budding industry.

So with that in mind, let’s take a look at the top seven reasons why people like Trevor grow marijuana — even though they can now legally buy it.

1. Growing Your Own Weed Saves You Money
Cultivating your own is a lot more cost-effective than purchasing it, whether you’re buying from the source or a middleman dispensary.

Sure, you have significant initial start-up costs as you invest in marijuana seeds or clones, hydroponics gear, grow lights, and other supplies and equipment for setting up a grow op.

You have ongoing costs including electricity, reverse osmosis water, hydroponics nutrients, grow light bulbs and air conditioning. (Keep in mind that if you grow outdoors, your costs for setting up and running a marijuana garden are significantly lowered.)

However, your start-up costs will quickly be recompensed. In just one indoor season with a one-light marijuana grow room, you can harvest two pounds of premium dried bud — worth about $6000 retail in today’s market.

And in one outdoor marijuana season, you could grow a couple of pounds of bud per plant! This could spell the end of expensive, inconvenient trips to the dispensary for you.

2. Growing Your Own Marijuana Can Generate Income
If you get serious about growing marijuana and generate maximized yields per light or from outdoor cannabis plants, you’ll have way more marijuana every harvest than you could possibly consume all by yourself.

More and more people are consuming marijuana, and some of these people won’t want to buy it from dispensaries. They might even want to buy from you!

Once you’ve reduced or paid off your start-up costs and are only forking out a few hundred dollars in ongoing (and unavoidable) spends per season to grow several pounds, you can retail your weed and make significant profits.

3. Growing Cannabis Is A Fun Hobby
If you ever enjoyed non-cannabis gardening, building up aquariums, owning pets, or otherwise nurturing living things so they grow safely and vigorously, then you’ll enjoy cultivating cannabis.

Cannabis horticulture can be therapeutic and fun. There’s something that’s just so fulfilling and grounding about digging your hands deep into cool soil.

Your marijuana garden gives you the rare opportunity to connect with nature and life cycles, work toward achieving a desired result, learn self-reliance and competence, and see the fruits of your labor bloom in a very personal and literal way.

When you inhale fine buds that you grew, or eat medibles you made in your own kitchen, you’ll feel that warm glow of satisfaction that only makes the end product more potent and tastier.

And you can even turn your grow room into a man cave (or a woman cave), for extra recreational benefits.

4. Growing Your Own Weed Enhances Cannabis Genetic Diversity
Too many of us grow the same ol’, same ol’ marijuana strains over and over, mostly from clones. These clones tend to be such familiar names as Blue Dream, Girl Scout Cookies, Platinum OG, Tangie, Headband, OG Kush, Super Silver Haze, Golden Goat and Ghost Train Haze.

No doubt about it, cloning is fast, moneymaking, and easier than growing weed from seeds. That’s all well and good, but where’s the fun in that?

When you take the time to study the product and attempt to grow from seeds of rare strains that have incredible stats and creds, you expand the cannabis gene pool and get buds that change your head in new ways. The challenge is rewarding in that your knowledge increases and makes you an asset to your cannabis community as you work to give the consumer fresh variety.

5. Now That It’s Become Legal, Growing Your Own Can Lead To Gainful Professional Employment
There are many employment opportunities within the ever-expanding legalized marijuana industry for cannabis cultivators.

If you’ve got your own marijuana garden and become familiar with hydroponics nutrients, irrigation, lighting, cultivation protocols, trimming, cloning, germinating seeds, and other marijuana gardening skills and supplies, you’ve got a niche skill set that can get you hired at a legalized facility.

Managers of the most successful legalized marijuana grow ops are earning on average $75,000 a year and up. And according to CNBC, Master Growers are now cracking the six-figure ceiling! So if you’ve reached a career plateau or are currently stuck in a dead-end situation, the marijuana industry could open doors you never knew existed.

6. Growing Your Own Marijuana Gives You The Best High
No matter how many jars of different strains of buds you see at a retail marijuana dispensary, only by growing your own can you find exactly the kind of high and medical benefits you want.

Indeed, you can choose seeds and clones that have the precise psychoactive and medical benefits you seek.

Not only that, you can utilize different growing techniques, cannabis concentrates processing, and selective breeding to further refine and customize marijuana for your needs.

You can also grow using hydroponics nutrients that boost harvest weight, and cannabinoid and terpenoid percentages, producing supernaturally amazing buds to your tastes.

7. Growing Your Own Marijuana = Total Control
When you buy retail marijuana, you won’t have complete knowledge about its genetics or how it was grown.

You can’t know for sure what strain it is, whether insecticides or other toxins were used to grow it, whether the crop is contaminated due to pests or plant tissue storage of nutrients salts, or whether it was flushed, harvested, dried, and cured properly and safely.

By growing your own, you control every detail, from start to finish.

You can choose the best seeds for your needs and breeds, induce those genetics to create customized personal strains, use the best hydroponics nutrients, and apply cultivation protocols.

You can make your own dabs, medibles, and other processed cannabis products at a fraction of the cost of buying these retail products. You can also get experimental and artful when concocting such products. Lavender-infused chocolate-coated pineapple edibles, anyone?

Yep, growing your own marijuana requires an initial investment of time and money.

It also requires that you learn how to grow. But there are plenty of articles on the BigBudsMag.com site explaining the entire process of selecting cannabis strains, creating a grow room, germinating marijuana seeds, and other such useful tips to help you on your path to success.

Growing your own marijuana isn’t as easy or convenient as buying legally. And even though I grow my own weed, from time to time I still enjoy tasty medibles, THC beverages, and other specialized products sold at legal dispensaries.

But if you make the leap from consumer to grower, you’ll discover it’s more interesting and fun to cultivate and process your own weed, which is the only way for you to be absolutely certain you’re using safe, clean, potent cannabis that gives you all you want from your weed! In short? The satisfaction of smoking and consuming your own and a painstaking, self-educated job well done cannot be underestimated.
 

roots69

Support BGOL
Registered
bbm-01-09-2017-resized.jpg
Indoor-outdoor growing has risks… and advantages! © Copyright, John Foster, 2017
How to Do an Indoor-Outdoor Marijuana Grow Op

I decided to do an indoor-outdoor marijuana grow op.

The reasons:

  • I didn’t want to be running grow lights, air conditioning, and fans constantly for 18 or 12 hours a day. Didn’t want the heat problems, increased costs, and security concerns.
  • I wanted my plants to enjoy natural sunlight and air movement.
Advantages of Indoor-Outdoor Grow Op:
  • Save money on electricity, C02, and other indoor grow op costs.
  • Plants are blown by wind and take in natural sunlight. This makes them stronger, and costs you nothing.
  • You more easily clean/maintain indoor grow op when plants are outside.
  • You do foliar spraying, pruning, training, staking, tying down, and other plant maintenance with less hassle outdoors.
Disadvantages of Indoor-Outdoor Marijuana Grow Op
  • Insects and disease vector.
  • Security risks.
  • Must grow in individual pots.
  • Half an hour or more per day moving pots in and out.
  • Plants need on-site monitoring. Not good to put plants outdoors and then leave the premises.
  • Must stake and support large blooming plants individually so they hold up while moving in and out.
  • Can’t use trellis netting in indoor grow because it prevents mobility.
What You Need for Indoor-Outdoor Grow Op
  • An indoor grow room.
  • An outdoor secure space nobody can see or get into.
  • At least four hours a day of direct sunlight, preferably five or more.
  • Good climate (Between 67-82°F and humidity less than 70%)
  • Cloth pots with handles
  • Stainless steel tables or some other way of keeping plants from sitting on ground.
  • A greenhouse is very useful for an indoor-outdoor marijuana grow op. It provides stealth, pest/disease control, and other benefits.
My indoor-outdoor grow program is like this:

  • I grow 20 plants, starting with seeds or clones transplanted into five-gallon cloth pots with handles after the plants are two weeks old.
  • I put plants in full sun on my sheltered, fenced patio from at least 9 am to 3 pm every day.
  • I move plants around to ensure direct sun is always hitting them.
  • If I need to do feeding or flushing, I chill my water to 68°F.
  • When direct sunlight goes away and shade comes, I do preventive/protective foliar spraying with light doses of Spinosad, B-52, Rhino Skin, and Sierra Natural Science products around 180 ppm, 5.8 pH. I do this 1-3 times per week.
  • I examine underside of every plant’s leaves, and rest of the leaf and stalks every day, just before I bring plants back into indoor grow room.
  • Every other day, while plants are outdoors, I clean my marijuana grow op room, and check all electricals, light angles/heights, nutrients dosages, etc.
  • I use soilless mix, potting soil, coco coir, or rockwool cubes as root zone media, depending on various factors.
  • I stop bringing plants outside about three weeks after I go to 12-12 bloom phase lighting.
  • Plants are always indoors at night.
  • I use a systemic root freed from Sierra Natural Science to armor plants against pests.
Things to watch out for:

  • Don’t put plants on the ground or near/under trees and/or other kinds of plants.
  • Examine other plants/trees in your landscape to see if they have transmittable pests/diseases.
  • Keep an eye out for aerial drones, children climbing trees, trespassers, thieves, nosy neighbors, broken fences, unlocked gates.
  • Beware the Chem-Lawn, Scotts, Tru-Green, neighbors, and other poisoners who spray poisons that could overspray onto your plants.
My indoor-outdoor grows save me about $350 per cycle because of reduced indoor marijuana grow op operational costs.

My harvests are 10-15% heavier.

If you can handle the extra work, the bugs and diseases, and the security risks, an indoor-outdoor marijuana grow op offers benefits.

However if people can easily see into your property (this includes helicopters, drones, small planes, neighbors, etc.), the potential of getting ripped off or busted make it too risky to do an indoor-outdoor marijuana grow op.
 

roots69

Support BGOL
Registered
bbm-03-29-2017-resized.jpg
Here’s a feed program for growing cannabis with LED grow lights.
Marijuana Fertilizer, Hydroponics Nutrients, Lighting Secrets for LED Grow Lights

LED grow lights for marijuana used to be a waste of time except for very small clone, sea of green, and autoflowering gardens.

These days you can get LED grow lights that work as well as HID for full size photoperiod marijuana plants, while consuming less electricity, lasting longer, and generating less heat than HID.

But there’s something you have to know: to get your heaviest harvests and strongest potency using LED grow lights, you must properly adjust your hydroponics nutrients feed program, grow room environment, and light height.

Properly-designed LED grow lights made specifically for cannabis deliver light wavelengths that supercharge photosynthesis, plant metabolism, and resin production.

Your plants then require a specific set and ratio of nutrients elements they don’t get from regular feed programs.

The first thing to remember is most LED grow lights brands aren’t worth the money.

We’ve tested all major brands, including some that cost $2500+ per light.

The only LED grow lights we’ve tested that meet our standards are made by Lush Lighting.

As we used Lush Lighting LED grow lights, we noticed faster growth, earlier maturation, less bloom stretch, heavier resin production, heavier harvests, less grow op heat, and lower electricity costs.

But we also noticed that our plants need more water, magnesium, sulfur, and calcium, and that environmental conditions had to be adjusted.

First, nutrients issues:

  • A magnesium deficiency shows up as deep green leaves with no other leaf problems, and stunted growth.
  • Sulfur deficiency shows up as yellow or very light green leaves on new growth.
  • Calcium deficiency shows up as dark green leaves with brown/rust-colored spots near the leaf margins.
Because deficiencies decrease photosynthesis, your plants may grow slowly, not gain height as fast, and seem sluggish.

Our method for feeding plants grown under Lush Lighting LED grow lights was developed after a year of experimentation.

Here’s the program:

  • Feed 15-20% lower parts per million (ppm) of base nutrients than you normally would.
  • Give your plants more water more often, but don’t overwater.
  • Think of water as a nutrient, not just a delivery material for nutrients.
  • Add Bud Candy starting three weeks into grow phase and keep using it until the final two weeks of bloom phase.
  • If you notice calcium and/or magnesium deficiency, add Sensi Cal-Mag, but don’t use it past 3-4 weeks into bloom phase.
  • Use pH Perfect hydroponics base nutrients. Most base nutrients have unreliable pH buffering which contributes to nutrients lockout of elements like magnesium and calcium. pH Perfect hydroponics base nutrients fix that problem.
  • In bloom phase, use Bud Candy and Bud Factor X, both of which contain magnesium.
  • Monitor leaf tips for burning (brown, crispy tips) and for too much light intensity (white tips).
  • If you see brown leaf tip burning, reduce your parts per million. If you see white tips, move your LED grow lights higher.
  • Lush Lighting grow lights are super intense, delivering unique ratios and types of wavelengths that drive plants hard. If you see your leaves folding down, it could be that your plants are getting too much light.
  • For seedlings and clones less than three weeks old, keep LED grow lights at least 40 inches above your plants if not higher.
  • Only when your grow phase plants are 20 inches tall or taller can they handle closer lights.
  • Gradually decrease the distance between your canopy and your lights an inch at a time. By the time your plants are two weeks into bloom, your LED grow lights 20-24 inches from your canopy, depending on which Lush Lighting model you’re using.
  • It’s desirable for your grow op to be about three degrees warmer than regular temperatures. For a non-C02 grow room, you can run about 79-80°F. For a C02 grow room, you can run about 83-86°F.
  • You don’t want to add heat to your grow room when using LED grow lights, but if you see nutrients deficiencies when your grow room is cooler than 74-75°F, it could be that low temperature is affecting water intake and transpiration. This affects transport of magnesium and calcium in the plant.
  • Increasing grow room temperature to 74-80°F, as long as relative humidity is 59-70%, is a good way to get plants to intake and transpire more water, which better transports nutrients inside the plant.
  • Pay close attention to relative humidity and vapor pressure deficit when running LED grow lights. You want higher relative humidity during clone or seedling phase and early grow phase, lower during bloom phase especially with thick buds.
The main thing to remember is that growing with LED grow lights requires a different approach to lighting, hydroponics nutrients, grow room temperatures, and watering than growing with high intensity discharge (HID).

When you’ve calibrated your gardening methods and materials to take full advantage of LED grow lights, you’ll see why more and more growers are replacing their HIDs with LEDs.
 

roots69

Support BGOL
Registered
bbm-02-15-2017-resized-1.jpg
Making marijuana tincture the easy way.
How to Make Marijuana Tincture (the Green Dragon)

Marijuana tincture is made using high-proof alcohol and marijuana.

Marijuana tincture gives you a potent, fast-acting, concentrated dose of cannabinoids and terpenoids.

It gives you a rapid-onset, psychedelic, long-lasting, unique high.

The nearly-pure alcohol you use to make marijuana tincture ensures that the mixture stays cannabinoid potent for several years.

Here’s all you need to know about making marijuana tincture:

Materials Needed:

  • Cannabis buds and heavily-resinated sugar leaves. Use the highest quality material.
  • Pure grain alcohol (Everclear). Everclear comes in 190 and 151-proof versions. Use the 190-proof version for your marijuana tincture. Unfortunately, 14 states don’t allow you to buy the 190-proof version, so you may have to use the lower-strength Everclear.
  • Clean jar and cap
  • Precision Oven (for decarboxylation)
Making Your Own Marijuana Tincture Step by Step
Marijuana tincture made with alcohol is called the “Green Dragon.”

This refers to the color, which can be intensely green, and the taste, which can be quite bitter.

The green color and bitter taste of marijuana tincture comes from chlorophyll in buds.

Everclear itself, especially the 190-proof version, has almost no taste, but it does have a burning kick that’ll wake up your mouth, throat, and stomach.

To get rid of chlorophyll, leach it out of your buds before you decarboxylate them, via the “water cure.”

Read here to know how to use water to cure marijuana.

The next step after the water cure is to decarboxylate your cannabis.

Decarboxylation alters molecular structure of cannabinoids so they become psychoactive.

Using the water cure before you decarboxylate is ideal, because decarboxylation dries the buds.

Read here for instructions on how to decarboxylate cannabis.

It’s easy.

Now take your decarboxylated cannabis and place in a clean glass jar.

Stuff as much cannabis into the jar as possible, leaving 3/4 inch of space at the top.

Pour Everclear into the jar, covering the cannabis material by half an inch.

Shake the jar.

If the cannabis material expands so it’s exposed to air, push the material down so it’s again covered by alcohol.

If you can’t get it to stay down, add more Everclear or remove some cannabis material.

Agitate the mixture by shaking the jar and turning it upside down and back up again several times.

Store the jar in a cool, dark place around 67°F.

Do agitation every two days.

After 25 days, pour mixture through a fine strainer into a container.

(If you had to use 151 proof Everclear, let the mixture go for 32 days total instead of 25)

Squeeze as much alcohol as you can out of the used-up buds and leaves, then discard the cannabis material.

If you used premium, decarboxylated marijuana and filled the jar nearly to the top with it, your marijuana tincture will be very potent.

Used under the tongue as a sublingual, or orally as a stand-alone tincture or as part of a mixed drink, 2 milliliters (about half a teaspoon) of marijuana tincture rapidly delivers as much THC into your brain as 2-3 joints!

Store alcohol marijuana tincture in a tightly-sealed glass jar or stainless steel container in the non-freezer part of your refrigerator.

Your marijuana tincture will retain potency for 2-3 years.

As with edibles and medibles, experiment with dosing.

And be aware: alcohol is a poison, especially at this proof.

Make your Green Dragon as cannabinoid potent as possible so you only have to consume a little alcohol to get a lot of high!

Now you know how to make and ride the Green Dragon!
 

roots69

Support BGOL
Registered
These are sum of the prettiest ladies Ive seen in awhile!!



9 Colorful Weed Strains To Brighten Your Day
In the world of weed, a wide array of colors abound.

colorful-weed-strains-brighten-your-day-featured.jpg

Pinterest


The diversity of weed strains available today can make any pot connoisseur giddy. These flowers vary in flavors and potency, but the visual impact of colorful weed strains never fails to impress. Though often always shades of green, some flowers take on hues of red, others golden or amber. And still yet others can take on deeper and darker tones like purple or even black. Often many falsely believe that more potent strains generally tend to be colored weed strains. But it is actually anthocyanins, or water-soluble pigments, connected to the pH level in the soil that turn flowers colors. These same pigments make fruits like blueberries and raspberries their specific shades. So if you’re interested in tasting the rainbow of reefer, start here with this list of the nine most colorful weed strains.

colorful-weed-strains-brighten-your-day-northern-lights.jpg

Pinterest

Northern Lights
Resulting from combining Afghani and Thai strains, this strain boasts of crystal-colored leaves that seem to twinkle. The shimmery speckles line the flower and make this relaxing indica look like the cosmos. And rightfully, this strain resembling the starry sky leaves the one enjoying it pacified and ready for sleep. It offers a spicy, sweet flavor. And furthermore, it has been a crowd favorite at previous High Times Cannabis Cups. Of the colorful weed strains on this list, it may not be the brightest and boldest, but its glittery effect makes it sparkle just a little differently than the rest.

colorful-weed-strains-brighten-your-day-black-russian.jpg

Pinterest

Black Russian
This sensual-looking marijuana plant is stringy with red and deep purple and lilac hairs lining it. Dark, but full of uplifting scents like tropical mango and lemon, this sultry indica makes you feel relaxed and sleepy. As such, it makes for a great sedative before bed or for relieving any pains and aches the body has presented. Yet, while it soothes the body and the mind to lull it into a restful state, this strain also produces a sense of euphoria. Made from mixing Black Domina and White Russian strains, its looks and its effects allure its fans, and they keep returning for more.

colorful-weed-strains-brighten-your-day-panama-sedena.jpg

Reddit

Panama-Sedena Red
Often, fans of flowers point out the bright hairs that dot a nug. Like the fire you set to this bud, its hairs are a vivid and bright red. And the bud is so peppered with these striking hairs, the bud looks almost entirely red, like a juicy strawberry. Unfortunately, this delicious sativa has a lengthy flowering period so it gives disappointingly low yields. Its rarity makes it so this energizing and happy strain is more and more a nostalgic high for those that think of this as one of the best colored weed strains.

colorful-weed-strains-brighten-your-day-blueberry-cheesecake.jpg

Pinterest

Blueberry Cheesecake
Sometimes your sweet tooth translates to what you want to smoke. This flavorful bud not only offers those with the munchies a tasty hit of strong blueberry and cheese flavors, it also looks pretty. Not flashy like the other colorful weed strains on this list, Blueberry Cheesecake has softer hues of blue-violet and orange hairs intermingled with the lime green of the flower. Great for a daytime high, its high levels of THC help you stay focused on tasks at hand while still keeping the body relaxed. Even the most resistant to sweets will want something to satisfy the craving after enjoying this strain.

colorful-weed-strains-brighten-your-day-pinkman-goo.png

Reddit

Pinkman Goo
Looking at colored weed strains, too often one feels drawn to the unique hair colors. But isn’t just about the hairs. This uplifting indica also has medicinal resin droplets (or goo) that look like sap tapped from a maple tree. This resin is 4% higher in THC than other, less gooey buds out there. Not be outdone by the most colorful weed strains, it isn’t just pretty because of its dewiness. It also has gorgeous purple-rimmed leaves and dense purple-tinted buds which mesmerize the eyes. Its earthy aroma only cinches its delectable and sensational appeal, making Pinkman Goo a bud to stick with.

colorful-weed-strains-brighten-your-day-black-beauty.jpg

Pinterest

Black Beauty
Seeking something darker? Sometimes the most colorful weed strains come in a shade of violet so dark, it looks almost black, like a concord grape. But despite its lack of brightness, this rare strain is a true treat. It has a pineapple and petrol aroma and a sweet taste. And because of its high THCV content, it gives its users help with PTSD, stimulating appetite, insulin production, and even regeneration of cells after an injury. But good luck locating this illusive beaut — she’s tough to find but worth a trip into the darkness.

colorful-weed-strains-brighten-your-day-rainbow.jpg

Reddit

Rainbow Kush
A list on colored weed strains would be incomplete without mentioning this brightly colored strain. Even its name declares its brightness and boldness, giving a full range of color to the bud. With notes of tropical, citrus, and berry flavors, this indica hybrid provides a creative, euphoric high. Made from crossing Dancehall and Blueberry strains, its flowers give a full spectrum of color that even those not enthusiastic about weed will stare at in awe. And though it can offer pain relief, it doesn’t overpower the body or give a heavy sensation. Nonetheless, this vivid strain uplifts whoever consumes it, not only for its vibrancy but for its feel- good vibes too.

colorful-weed-strains-brighten-your-day-purple-urkle.jpg

Pinterest

Purple Urkle
This skunky indica tastes distinctly of grape and berry, and its colors back up those flavors. Like many of the most colorful weed strains, this flower has colors combining to form a beautiful product. Its orange and violet hairs combine with the deep emerald green most often associated with weed. Great for full body relaxation, this floral strain works well for insomnia. Furthermore, it can aid in relieving arthritic pain or any sort of mental distress. Finding your happy place in this high is easy— it’s potent and a definite beauty on which to feast your eyes.

colorful-weed-strains-brighten-your-day-acapulco-gold.jpg

Pinterest

Acapulco Gold
Thousands would rush westward if they knew this golden colored strain could be easily mined. This old school golden oldie has maintained over 20% potency without the help of modern science controlling it. Not only that, but this strain making the list of most colorful weed strains claims fame as a purebred sativa. This is an amazing feat considering hybrid-dominated genetics. To top off this 24K strain’s positive attributes, it promises a heady albeit productive high that still helps with body pains. Better than a gold ring, winning Acapulco Gold in a rose blunt would serve well as a thoughtful, colorful, and romantic gift for any weed lover.

The List of Most Colorful Weed Strains Keeps on Going
Luckily, this list of colored weed strains isn’t static. In fact, it continues to grow as more and more growers set to the task of harvesting plants that delight people in presentation and potency. A delightful science, the cultivation of the plant shows itself to be more and more of an art. And these unique colors of these plants— whether green orange, gold, red, purple, blue or black— are one of the mediums for their masterpieces.
 

roots69

Support BGOL
Registered
Six Things to Know Before Opening a Dispensary

If you’re thinking about opening a dispensary, you’re going to want some inside tips from industry experts. We got you covered.


best-marijuana-dispensaries-seattle-7-e1538755040428.jpg

Shutterstock


The idea of owning and operating a dispensary is often romanticized. In fact, it’s perceived as a relatively simple, sure-fire way to make money. But legalization’s proven the opposite to be true. Opening a dispensary is a grueling, expensive, multi-step process that’s easy to botch. The legal hurdles of running a cannabis business are so intricate and expensive, it’s almost impossible to navigate the waters of compliance without some sort of professional guidance.

The team at Cannabis Advising Partners (CAP), a Long Beach-based consulting firm, specialize in helping people navigate the legal industry without getting chewed up and spit out. The canna-laws in California can be merciless. Thankfully, they gave us some stellar tips on the do’s and don’t’s of opening a dispensary. Keep in mind that, although these tips are exceptional, they won’t suffice for professional or legal advice. They will, however, provide you with a base-understanding of what you need to do to get your dispensary going.

Outline the Future
The process of getting licensed by the state is almost as daunting as becoming a dual citizen. It takes time, money, diligence, and a lot of research. But there are things you can do that can make the process a bit less complicated. Creating an outline that functions like a to-do list (or a plan of attack) is a good place to start. It should sketch out the brush strokes of the whole process from identifying your budget to opening the dispensary. Doing this not only helps you keep track of what needs to be done, but it will also assist with developing a business plan. And a stellar business plan is the only way officials on the municipal level are going to issue you a permit to operate, which is the first step to obtaining a license from the state.

“Creating an outline is Step Zero,” says Devon Martinez, a CAP compliance specialist. “You want to outline the steps you need to do prior to getting started, which will help you realize your budget requirements. From there, you’ll have a better understanding of what kind of building you’ll need, what cities you should look to operate in, and what the business plan will look like.”


Manifest Your Vision
Similar to creating an outline, Nathan Wofford, also a compliance specialist at CAP, believes having a vision for your business is a vital preliminary step to opening a dispensary. This vision, he explains, should be about who you are and what, specifically, your business is trying to accomplish—for the community and beyond.

“If everything from your outline to vision to business plan basically says ‘we’re going to make money and you can take our taxes,’ it’s not going to look very good to the community or city officials,” Wofford says. “If you want to start benefits plans or help the industry actually become something that cohesively works not just from seed to sale, but from the top to the bottom of business structures, make sure that’s understood.”

Rent or Own in the Zone
After identifying the budget, creating a plan, and crafting your vision, the next step is finding the real estate—arguably the most important part of the whole process. But before putting money down on a place that seems ideal, it’s imperative to find property in a “green” zone.


“Finding the right real estate can be very difficult and requires understanding the local cannabis laws and their zoning rules,” says Martinez. “Every city’s laws are different. So in one city where it’s required to be 1000 feet away from schools, it might only be a 500 foot requirement in another city. Other cities might have distance requirements from rehabilitation centers and beaches while others don’t. It’s nebulous—a complicated subject in its own right.”

Often, this is where people tend to lean on consulting firms or lawyers to help them—and for a good reason. Locating real estate in the proper zones is time consuming and complicated. It should be noted that anyone can find this information, though. Most 420-friendly cities have online portals on their websites that outline where the green zones are.

But Wofford warns that you shouldn’t depend on someone just because they say a property is in the proper zone. “Do your own research,” he says. “Don’t put money down on a property just because your real estate person says it’s zoned, only to find out that it’s not. Maybe they don’t know cannabis well, but if you would’ve done some extra reading, you could’ve figured it out.”


Seek Opportunity, Not Location
Wofford also emphasizes the fact that even cities within the same county are likely to have different laws. So, it’s imperative to research the laws and become familiar with what you’re supposed to do. At the very least, it will help you understand the type of risk you’re taking by opening a canna-biz.

“Pasadena is going to be different than the areas in LA that allow cannabis businesses to exist,” Wofford says. “But just because these cities are open doesn’t mean that other cities have given cannabis the green-light. Doing your due diligence will tell you if there’s a limit to cannabis businesses, if there’s a lottery system, if there are phases, and how much it’s going to cost you.”

The age-old adage of “location, location, location” doesn’t apply to the cannabis industry—yet. Considering most of California still prohibits cannabis, Martinez and Wofford say the mentality needs to be “where’s the opportunity” instead of being glued to a certain location.

Know Your Council Members
The licensing process in California is tiered. Before you can get a state license, you must first obtain a permit from your local government. So, it’s crucial to know who’s who in the city. Martinez explains that you want to know who on the council is for and against cannabis, and if there’s anyone outside of the council members–like the city clerk, for instance– who has involvement in the licensing process.

“When it comes to interfacing with government officials and bureaucracy in general, you have to interact with them as much as possible,” Martinez says. “Constantly put a face in front of them. Go to every city council meetings and speak during the public comments.”

Martinez recommends talking to the council about how much benefit your company is going to bring to the community and the city as a whole. The goal, he explains, is to cultivate the reputation that you’re always around and an ingrained member of the community. The best way to achieve this is through your presence.

Don’t Bribe Them
We’ve all heard of corrupt city council members who’ve taken money-offers from people wanting to open cannabis businesses. And we don’t recommend anyone do this. Because, even if it worked, it’s important to note that illicit-market behavior is not the smartest way to do business these days—especially if your city officials are scavenging for reasons to maintain prohibition. Although the cannabis world is still the Wild West in many ways, there are rules now and, thus, major consequences. Not only will your integrity be reduced to smushed bug on a windshield, there’s a chance you’ll also get exiled from the cannabis industry by state regulators. Is a bribe really worth the risk? No.

“Don’t ever talk about financial compensation,” says Martinez. “Communicate from a place that’s going to benefit the community. Do not come from a place thats going to jeopardize your integrity.”
 

roots69

Support BGOL
Registered
The concentrates world is about to change big time!!!

What The Future Holds For Concentrates


The-Tao-Of-Dab-Header.jpg

Ry Prichard/High Times


Never before has there been such astonishing progress in the science of cannabis and our understanding of how it works in conjunction with our bodies and minds. The recent innovations in the hugely popular world of concentrates illuminate how effective and important a role they’ll play in the cannabis community.

Previously, we looked at the history of concentrates, the different types and how they’re made.

Now let’s take a look at how cannabis concentrates work, explore new and improved techniques to extract and consume them, and examine the overall promise that concentrates may hold for the future.

The Synergy Of Terps And THC
The-Tao-Of-Dab-6.jpg

Cannabis oil that has been extracted from the plant material awaits its purge to remove solvents. (Photo by Justin Cannabis/High Times)

As any reader of High Times likely already knows, cannabis is made up of cannabinoids like THC, CBD, CBN and the essential oils known as terpenes.


One of those cannabinoids, an acidic carboxyl group known as THC-A, has many health benefits, including neuroprotective and anti-inflammatory properties, as well as helping to regulate the body’s endocannabinoid system. But the magic really begins when THC-A is heated to 220°F. The carboxyl group is removed from THC-A through a process known as decarboxylation, leaving behind THC, the psychoactive component of cannabis that provides the euphoric feeling of being high. Yet THC by itself has no real direction: There is no specific guidance to the way it makes you feel—much like the erratic sounds of a piano with a cat strolling across the keys.

Terpenes play an integral role in managing the specific effects of cannabis. These are the essential oils that lend their distinctive tastes and aromas to the plant. When terpenes are applied to THC, the effect is greater than the sum of its parts (commonly known as the “entourage effect”), and the result is a mystical synergy that complements the human body and mind. Think of it as something like the way a car works: THC is the catalyst, the gasoline that powers the engine, but without something steering, the car drives around aimlessly. Terpenes are the steering wheel that guides the car in its journey and directs its particular path.

Myrcene, a terpene with an earthy smell much like a mixture of gasoline and cloves, provides a sedating, muscle-relaxing and appetite-stimulating effect when smoked with THC. Ever sink back into the couch after a toke and suddenly realize that three hours have gone by? You most likely have myrcene to thank for that. Conversely, the terpene known as limonene produces a pronounced citrusy scent. What happens when you smell a fresh lemon or orange early in the morning? It wakes you up and gets the blood going. Combined with the entourage effect of THC and other cannabinoids like CBD, CBN and CBG, limonene invigorates you: The mind opens up and soars, creativity flows, and the body becomes energized with increased motivation. Not only is this an enormously pleasant feeling, but it’s also very useful as a tool for mental enhancement. Figuring out how the terpene profiles of specific strains affect the individual can allow the cannabis consumer to select particular strains for their desired results, much like people use different pharmaceuticals—although cannabis doesn’t come with all of the negative side effects of pills. Want to stimulate the mind, stir the creative juices, and get yourself motivated? Dab some Haze or Jack Herer—sativas that contain limonene along with other uplifting terpenes like terpineol and linalool. It truly is a sort of scientific aromatherapy!


More On Terpenes
The-Tao-Of-Dab-7.jpg

A hefty slab of stable concentrate that can be further processed to isolate its THC-A content. (Photo by Justin Cannabis/High Times)

The term “terpenoid” is often used to describe a compound while it’s still present in a living flower. The difference between terpenes and terpenoids is that terpenes are hydrocarbons, whereas terpenoids contain additional functional groups. These groups are other atoms or bonds within molecules that are often lost during drying or curing, thus resulting in a compound known as a terpene. There are nearly 200 terpenoids that have been identified in cannabis, and most are found in other plants as well.

For example, limonene, which lends a citrus-like aroma to cannabis, is indeed the same terpene found in lemons. When isolated and put side by side, the limonene in cannabis and lemons have identical molecular structures. Moreover, monoterpenes like pinene will vaporize more rapidly at lower temps, while sesquiterpenes like caryophyllene and humulene vaporize only at higher ones. Preserving them all is one of the keys to providing full-spectrum, unadulterated flavor—precisely what the cannabis plant’s essential oils “map out.” It is also important to understand that the effects that each terpene produces are changed when combined with other cannabinoids or terps. THC combined with limonene might provide an uplifting effect, but may produce a completely different result when combined with myrcene.

A Look At Some Of The Major Terpenes, As Well As Their Effects And Boiling Point In Vaporizers
The-Tao-Of-Dab-Chart.jpg


The Science Of Dabbing
The-Tao-Of-Dab-1.jpg

Heating your nail red hot helps remove any burnt residue. Don’t forget to let it cool down!

Understanding the fundamentals of how THC-A is converted into THC, as well as how terpenes volatilize, will provide a crucial insight into how to consume concentrates in a more refined way, especially when dabbing. For the uninitiated, dabbing is the process of applying a small amount of concentrate (or “dab”) to a hot surface (“nail”) that’s affixed to a specialized bong (“rig”); the concentrate is then vaporized and inhaled without the nasty fumes of a lighter, the harsher smoke of plant material, or other unnecessary components of cannabis that don’t add to the high.

Knowing that THC turns from oil into vapor at 314.6°F, and that the most stable terpenes and cannabinoids vaporize at a maximum temperature of 428°F, tells us that temperatures much higher than that can scorch or even burn these components of the dab, leaving a burnt black tar on the nail. This essentially incinerates the dab’s terpenes as well as the “mapping” effect they create for the flavor and high.

In fact, when you light a joint, it’s the plant material just before the ember that gets you high, not the material burning in the ember. The heat emanating from the ember is enough to provide temperatures sufficient to convert the THC-A into THC and volatilize everything in the adjacent plant material. As mentioned, THC reaches its boiling point at 314.6°F, and all of the other cannabinoids and terpenes at no higher than 428°F, while the ember of a joint can reach 1,300F°! Thus, the greater portion of the cannabinoids and terpenes in the ember have already been incinerated.

Clean Dab Etiquette
The-Tao-Of-Dab-9.jpg

Lower quality dry wax is ideal for further isolation techniques.

Gone are the days when nails were dabbed while still glowing red-hot from a torch. Growers and extractors are so meticulous in creating the best terpene-filled concentrates that it would be a shame to degrade the high-quality flavors in the process of enjoying them. There are a few new tools that have been added to the dabber’s arsenal in order to elevate the experience of smoking concentrates: These include a timer, cotton swabs, rubbing alcohol, a “carb cap” and some patience.

While quartz nails and “bangers”—i.e., an elongated, curved stem with a bucket nail—aren’t particularly new, they provide the easiest kind of surface to keep clean, since the walls are smooth, leaving little purchase for the residue to cling to. Even so, any buildup of residue will quickly grow, as it provides a place for the next dab to seep into and smolder, lending a slightly burnt flavor to the experience. Remember, the goal is to enjoy a fresh dab without incinerating the terpenes and cannabinoids, which provides a cleaner, more specific high reflecting the natural properties of the strain being smoked.

The-Tao-Of-Dab-3.jpg

Quartz nails and domeless bangers provide a cleaner and purer dab.

Wiping down the surface of the nail with a cotton swab soaked in alcohol will clean up most of the residue from a previous dab. Using the torch and getting the nail red-hot, you can focus your cleaning efforts on any dark spots until they burn away; this will ensure a clean surface and extend the life of the nail exponentially.

The key here is to wait for the nail to cool off to an appropriate temperature. Remember, THC vapes at 314.6°F, and the most volatile cannabinoid maxes out at 428°F. This is where you should cue the timer: Depending on the thickness of the nail, use the timer to figure out long it takes the nail to cool from red-hot to an appropriate temperature (laser thermometers work well here). The nail should be hot enough to bubble and boil the dab when applied, but not so hot as to throw off lots of smoke—just a tiny bit. It’s not until you cover the nail with the carb cap (which restricts the airflow and creates convection) that the oil should start to smoke heavily.

The-Tao-Of-Dab-8.jpg

Nothing beats a single solvent run of high quality herb.

Depending on how thick of a smoke you want, you can adjust the time. The leftover residue on the nail should be just a shade or two darker than the dab in its raw form in the jar. If it’s turned black or gotten too dark, the terpenes and some cannabinoids have been scorched or burned away, changing your toking experience. One of the most important things here is finding that sweet temperature spot for the nail, since thinner nails cool off faster, while thicker ones retain their heat more steadily—but also need more time to warm up and cool off. Also, cleaning the nail while it’s still warm is infinitely easier than cleaning one that’s cooled off.

Advances For Concentrates
The-Tao-Of-Dab-4.jpg

Near-white THC-A crystals that have been isolated from most other cannabinoids and terpenes. (Photo by Ry Prichard/High Times)

Talking about the progress in concentrates could involve a new conversation every day, since that progress advances at such a rapid pace. More and better science has cultivated a scene that has revealed ways to further isolate what cannabis has to offer and use it in new and beneficial ways. Now that we’ve improved our understanding of how to consume concentrates, let’s discuss some of the newer extraction techniques and products.

Distillates account for a significant portion of the concentrates being consumed at present. Runny like maple syrup, distillates can be found in oral syringes in order to dispense easily. Most often, you’ll find them in pre-filled vape-pen cartridges, as the fluidity allows for a better contact to the heat source. But what exactly is a distillate? They’re often made using hydrocarbon solvents (butane, propane, pentane, hexane, etc.) in a wiped-film short-path distillation process—a method that uses a Roto-Vape, a concentrate-filled flask sitting in a bath that spins while the water is slowly heated.

As the heat rises, each component of the concentrate turns from a liquid into a gas. The gases travel up tubes and recondense at their components’ specific temperatures, collecting in different chambers. This allows the cannabinoids to be separated from the terpenes and other elements, leaving a sometimes golden-colored liquid. Even more advanced, some processors are able to perform this whole process under vacuum. This allows the heating of the material to occur at much lower temperatures, as the boiling points of the various components are reduced under lowered atmospheric pressure. This decreases the degradation of the material and keeps the end result as clear as possible. It is very important to note that this does notremove all remnants of pesticides or industrial chemicals—which is why there’s no substitute for growing organic, pesticide-free cannabis.

The-Tao-Of-Dab-11.jpg

A jar of pure CBD isolate crystals. (Photo by Ry Prichard/High Times)

CBD isolate is a pure form of CBD that can be extracted from high-CBD cannabis and hemp. Somewhat similar to the short-path distillation process, the procedure should be repeated several times to ensure a purer product before immersing the distillate into pentane or hexane. Heat is applied and then the distillate cooled several times. Some extractors drop in a few “seeds” (i.e., a few small CBD crystals) to help instigate growth and quicken the process. If left in a dark and undisturbed location, the crystals will start to bloom. When the crystal growth slows down, the remaining pentane is vacuum-purged and the beautifully formed crystals removed. If desired, one can further refine the crystals by a light washing to remove any impurities from their surface.

THC-A crystalline can look like a quartz crystal and is derived in an almost identical process as CBD isolates. The major differences start with the material that is being extracted. Strains high in THC-A but low in CBD will precipitate THC-A crystals, while low-THC/high-CBD strains and hemp (i.e., with less than 0.003% THC) will result in CBD crystal blooms. CBD has a lower boiling point, which can make it easier to isolate; THC-A can be a bit more finicky and requires more attention. Matt Van Benschoten of Beezle Extracts says that his company goes so far as to “place our resting material on thick mats, to keep any shaking or vibrations from disturbing the blooming process, as they can terminate crystallization.”

Tony Veruza, CEO of Blue River Extracts and the winner of several Cannabis Cups, says that his company has found that it can even “grow” crystals in a good amount of terpenes instead of using a second solvent (since terpenes are a solvent themselves). This eliminates the need to introduce solvents like hexane or pentane and then worry about purging them completely, since it can be difficult to fully purge some solvents from THC-A in crystal form and will sometimes require several washes to maintain purity.

High-terpene, full-spectrum extractions, or HTFSE, have become highly popular of late and generally provide a very potent smell when opened due to the high ratio of terpenes present. Usually, the plant material used for these extractions will be fresh, undried and uncured—i.e., material that’s been kept cool in order to preserve the maximum amount of terpenes. A live resin base is extracted using a solvent such as butane, pentane or the like. This extract then gets put in a large jar and set to rest and cure for a week or two. “THC-A wants to be in crystal form, and given enough time and the proper environment, it will eventually crash out and separate, with crystals on the bottom and the terpenes up top,” Van Benschoten of Beezle Extracts says. “This makes an apple-sauce-like end product that is high in terpenes, with ridiculous flavor.”

While extracting from fresh, undried material is popular these days, the folks at Blue River prefer a slightly different method. Using fresh material can sometimes result in a slight back note to the flavor of a dab that Veruza describes as “wet and tinny …. We prefer to cure our flowers for five to six days, but in a cool environment below 60°F to preserve those volatile terpenes. That allows moisture to escape from the plant material while ensuring minimum terpene loss and degradation.”

The-Tao-Of-Dab-10.jpg

THC-A crystals with a thin film of mother liquor AKA “terp sauce.” (Photo by Ry Prichard/High Times)

Terpene isolation is another process that has evolved to improve the yield and quality of the recovered terps. Traditionally, terpenes are isolated during the purging process, as the heat used to eliminate the solvent will also remove them. All of the gases removed are collected in a cold trap—a chamber brought to lower temperatures to force the gases to recondense as a liquid. This liquid is then winterized (chilled in a liquid solvent so that the heavier components settle and separate from the lighter ones), resulting in a capture of the precious terpenes.

Yields can vary greatly depending on the starting material and the temperatures reached in the extraction process. Blue River Extracts uses a newer and modified process to increase returns and result in what it believes is a higher-grade product. Using just nitrogen, alcohol and a vacuum oven, its process puts everything under a vacuum to lower the boiling point of all of the components. Next, Blue River introduces steam to pull out the terpenes, which are then cold-trapped and recovered separately. Cannabis terpenes can be very expensive to extract due to their low yields: Isolating 8 milliliters of terpenes from a pound of cannabis flowers is an average yield with good material.

The Future Of Dabs And The Industry
The-Tao-Of-Dab-5.jpg

This Juicy Fruit live resin is high in terpenes and resembles apple sauce with its thick and chunky consistency. (Photo by Ry Prichard/High Times)

What do these isolation methods mean? First off, isolating THC-A is a precursor of bigger things to come. In general, the cannabis community isn’t running to dispensaries to purchase isolated THC-A, which counts as more of a novelty item at present. But this is common when such a new and different product emerges, since it can take time to understand and realize the possibilities. To date, a handful of people have created a sort of “terp kit” containing a jar of THC-A and several jars of full-strain-profile terpenes. This lets you create flavors with the same base material and gives you the ability to have dozens of strain flavors at your fingertips—you simply need to add some THC-A crystalline to provide that extra kick.

Distillates are great for making extracts for vape cartridges, but they don’t retain the full flavor of the cannabis due to the process involved in creating them, and therefore terpenes need to be reintroduced. Quite often, food-grade terps are added to vape-pen cartridges, much like the juice in e-cigarette pens—but the health effects are still unknown, and most cannabis purists are against this kind of adulteration.

A great deal of concentrates’ future potential lies in the commercialization and industrialization of cannabis as a whole. Cannabis that may not be fit for consumption (because it was harvested too early, was overly dried or burned, or contains seeded buds or old or bad-quality flowers and trim, etc.) can now be broken down into its basic parts and utilized in reconstructing acceptable products. The THC-A extracted from Mexican “brick weed,” once isolated, is the same as the THC-A extracted from the best cannabis in the world. This allows cultivators to focus less on growing quality meds—a process that can be costly—and focus on quantity and THC-A production instead. Large fields of lower-grade cannabis can now find a market as well. Whether for better or worse, this model is exactly what industrialization and commercialization do to ensure the best returns on investment.

The market has proven that it will sustain mass-produced, inexpensive commercial extracts as well as hand-crafted, organically grown and responsibly cultivated small-batch boutique concentrates. This is why it’s enormously important that we understand these aspects of the extraction process and take an active part in deciding what we deem acceptable for the future of cannabis concentrates.
 

roots69

Support BGOL
Registered
Getting Near The Clear: A Guide To Cannabis Distillates

Distillation has existed since antiquity, but for our purposes, cannabis concentrate distillates are made by refining already extracted cannabis material.


Getting-Near-The-Clear-Guide-To-Cannabis-Distillates-Header.jpg



“Civilization begins with distillation.”

Or so said classic American author William Faulkner years ago. The legendary drinker was referring to distilled alcohol, of course, and as his quote notes, distillation has existed since ancient India and Roman Egypt first distilled liquor and water.But in the 21st century, the time-tested tradition of the distillation process has inevitably been modified to become part of cannabis concentrate development—and may represent the coming future of legal pot, especially when it comes to large-scale production.

When the trade name of a cannabis concentrate, of all things, is dubbed “The Clear,” it can have quite a reputation to live up to—and the cannabis concentrate distillation represents just that; the cutting-edge of cannabinoid extraction, where innovation and new ideas continue to push the envelope by developing end-products that provide everything a user desires, from purity to potency.

You’ve likely already tried THC or CBD distillate products, especially if you live in a legal state. Perhaps you’ve purchased distillate in a syringe to be applied to a dab rig, or contained in a vape pen cartridge.


Distillates offer an obvious advantage when it comes to medicinal marijuana applications because of the considerable reduction of impurities in the finished product, as well as the purified oil being vaporized, so the patient isn’t subject to combustible smoke.

Cannabis distillation is intriguing on various levels, as there are still ample opportunities for growth and advancement in this burgeoning sub-industry, ready to blossom into an entirely new approach to producing weed concentrates in a post-legalization world.

Yet, there is also some controversy and unresolved misconceptions about distillates, which will also be addressed.


All of these factors position cannabis distillation as a complex issue with numerous tangential topics, and in order to enhance the discussion, we spoke to a couple of “movers and bakers” in the cannabis distillation industry to provide insight and to counter some of the controversies.These were cultivation and extraction expert David Bonvillain,owner of Elite Cannabis Enterprises and Elite Botanicals in Loveland, Colorado, as well as Adam Lustig, founder of Higher Vision, creators of such powerful products as “Super Oil” (more on that in a later section).

Distilling The Dank
Getting-Near-The-Clear-Guide-To-Cannabis-Distillates-1.jpg

Root Sciences Short Path Distillation System

As noted, distillation has existed since antiquity, but for our purposes, cannabis concentrate distillation is the modern-day process of refining already extracted cannabis material (concentrate oil)—by separating and concentrating three distinct fractions: cannabinoids, the lighter volatiles (terpenoids and flavonoids) and the non-volatiles—the heavier, unwanted materials (pesticides).

In millennial terminology, think of distillate products as being “post-concentrates.”


And it stands to reason that the higher quality extract, the higher quality the finished distillate oil will be.

“One chief advantage to distillates is when you’re looking for that strong, specific cannabinoid formulation for a specific purpose,” Adam Lustig explained.

One example would be a distillate containing the cannabinoid CBD (cannabidiol) for purely medicinal purposes.

Distillation is distinct from more prevalent cannabis concentrate outcomes, like wax and shatter, in which more basic extraction methodology is employed by using thinning agent solvents, like butane, propane or, preferably, via supercritical CO2 for superior taste.

A cannabis “crude oil” butane heated or CO2 concentratepreviously containing anywhere from 70 to 85 percent psychoactive THC could be elevated up to a near-perfect 99.85 percent cannabinoid concentration via distillation, as reportedly achieved by Root Science’s distillation equipment.

This process removes all of the undesired elements like ethanol used in the original extraction, as well as plant waxes, fats, chlorophyll and those terminally pesty pesticides.

The finished distillate is lighter yellow in color than pre-distilled crude, with considerable clarity—thus, “The Clear.”

Concentrate distillation occurs not by using the aforementioned solvents but rather by utilizing the differences in the volatility—the boiling points—between various compounds in the crude oil (such as the difference between cannabinoids and terpenes), a technique also known as thermal separation.

Per Skunk Pharm Research, the temperature ranges average 185°-195°C for the lighter volatiles (terpenoids and flavonoids), while cannabinoids are separated at 260°C, with the black non-volatile compounds getting disposed. The high viscosity, or melting point, of the cannabinoids is maintained by keeping the materials warm enough that they flow through the entirety of the distillation components.

This is achieved via technological processes such as molecular distillation, also referred to as “short-path distillation,” which is actually a somewhat overused general term for the physical set-up of a basic glassware, bench-top system—consisting of a boiling flask with a neck attached to a vacuum condenser, enabling the manipulation of molecules which transform the crude oil into vapor collected as distillate in a receiving flask.Such an apparatus can be scaled-up to handle larger liter volumes of cannabis crude.

An example of the processes at work can be found in the proprietary distillation equipment—a “still”—developed by the Wisconsin-based company Pope Scientific.The previously extracted oil makes its first “devolatilization pass”—or “run”—through the Pope still, with vacuum pressure and at lower temperatures, removing any remaining solvents, air, gas, water and even lighter-end terpenes.

The second pass through the still utilizes both stronger vacuum pressure and, as noted previously, higher temperature to pull the cannabinoids away from the heavier, darker, undesired elements, including those despised pesticides.

The first pass is necessary to allow for greater vacuum pressure to achieve more successful distillation of cannabinoids in subsequent runs, by not carrying over unwanted gases or volatiles to the finished distillate.The one drawback to this process is the stripping of the terpenes (see next section).

Belfair, Washington-basedcompany Root Sciences has developed a wiped-film short-path distillation system that enables distilling cannabinoids at a rate of 1500 ml per hour, done at a temperature considerably below their boiling point.

This creates a more “shelf-stable” product that maintains its color and potency after being placed in a sealed container for sales.

The Root distillation system also does not place the feed-zoner under the vacuum, permitting a continuous supply of oil entering into the system, without the interruptions of having to shut off the vacuum, which facilitates the greater mass production of distillate.

After commercial cannabis distilled oil has gone through all of its runs for maximum cannabinoid purity and terpenoids and flavonoids have been added, the distillate can then be formulated and reheated before being injected into a container, cartridge or capsule—depending on the product being manufactured.

Inviting Terps To The Distillate Party
Getting-Near-The-Clear-Guide-To-Cannabis-Distillates-3.jpeg


One of the issues that certain cannabis connoisseurs have with some distillate products is their lack of terpenes, which are the oils that provide taste and aroma.There are well over 100 distinct terpenes identified in the cannabis plant, and they actually play a role in creating the desired “entourage effect,” in which various terpenes like myrcene and limonene add to the flower’s physical and mental high.

Terpenes also work in conjunction with and augment the plant’s cannabinoids, such as psychoactive THC and medicinal CBD.

Dave Bonvillain capsulized the dilemma: “As you make things more potent on the cannabinoid side, you’re removing things like terpenoids and flavonoids [cannabis metabolites also contributing to the color, smell and flavor of a strain], the overall ensemble of components that make for the complete cannabis experience a user perspective.”

“You definitely want to maintain the ‘entourage effect’ because when you don’t have all of the terpene activity, you lose some of the firepower,” he continued. “I mean, it’s like when you dab pure THC-A crystals, it’ll make you high as balls, but there’s no ‘pomp and circumstance,’ right? I don’t have a ‘rush’ with it, and I don’t feel lethargic afterwards and ‘racy’ afterwards because there’s no terpenes at all. It’s only the ‘stoned’ part. And suddenly you realize, ‘Hell, I don’t want to smoke it just to get high, I’m already high.’No, I like the flavor, I like the aroma, I like all of the extra effects that comes with the terpenes!”

Adam Lustig added, “In terms of a full psychoactive effect, you’ll get higher off 70 percent THC with the terpenes than you will off of 90 percent THC with no terpenes.”

Bonvillain’s explained his take on the process of returning a given strain’s flavor and effects to the distillate.

“It depends on the product you want at the end,” he said. “I think the resolution to it now is [to] isolate your terpenoids first.You essentially ‘pull off’ (with vacuum pressure) your terpenoid and flavonoid volatiles, and then you distill everything, so you have you pure cannabinoids.And on the back-end, you can add the terpenoids and flavonoids back into the distillate.”

“It’s not like you’re adding foreign substances, you’re adding back the individual constituents as the product maker sees fit,” Bonvillain added. “Or even, as the plant itself originally did, without all the other crap—unwanted elements like pesticides—while maintaining the original integrity of the plant [in terms of the preserved cannabinoids and terpenes].”

Lustig’s Higher Vision is one of the pioneering companies to add “live terpenes” to distillates.

More commonly referred to as “live resin,” this fresh-frozen concentrate has a much higher terpene content, as much as five times more by weight. Terpene molecules can either be light or heavy—as one might expect, the “light” terpenes create the fruity and floral weed scents, while the “heavy” terpenes are responsible for ganja aromas more pungent and earthy.

Lustig noted, “I can take plain distillate and blend it with five different terpenes and get five different effects from it after consuming it.”

Terpenes from other plants can be added as well, if you’re into strawberry-flavored oil, for example.

When it comes to the importance and use of live terpenes, Bonvillain elaborated: “The reason we smell the weed is that the terpenes are volatile, and they’re coming off the plant all the time, and it’s hard to capture them.”

“As a grower, I want my extract to smell as fresh as when I was growing it; anything less than that frustrates me,” he continued. “We’ve gotten into a lot of techniques trying to preserve that single plant flavor and aroma profile all the way through the process.And fresh frozen plant material [terpenes] that’s run [distilled] shortly after harvest does a better job of that than dry cured plant material, though some prefer that for the more ‘natural’ smell.”

The ‘Dissing’ Of Distillates
Getting-Near-The-Clear-Guide-To-Cannabis-Distillates-2.jpeg


Despite the positive developments and growing interest in the world of professional weed, concentrate distillation is still regarded with some derision in particular cannabis circles.A portion of the negativity derives from Internet trolls, no doubt, but is some of the criticism legitimate?

One particular point of contention has experienced oil consumers referring to distillates as the “hot dog of concentrates”on social media platforms like Instagram and Reddit.

The “hot dog” comparison is a reference to distillates being a composite product of allegedly lesser materials, much like when the actual food product for which it’s named is made from lower-grade meats.

However, the critics seem to be missing the point that distillation represents a refinement of the cannabis crude oil and not a downgraded product like an actual hot dog slapped together from meat trimmings.

And as it can so often be with many products in the legal but still fledgling world of weed, it comes down to the quality of the source material—in this case, the cannabis crude oil. Adam Lustig confirmed as much when he noted, “Yeah, some people tend to think distillates are the low-end of the concentrate spectrum, which comes, a lot a times, from distillates being made from low-grade crude [filled with pesticides and other impurities].

Per Motherboard, the distillate producing company Organa, based in Colorado, reports achieving up to a 15 percent yield, which translates into 15 grams of flower producing one gram of distillate. Such a low yield underscores the importance of initiating the process with high-quality flowers and crude oil.

David Bonvillain has obviously given long thought to the subject, and he elaborated on what he’s determined to be the two factors that have driven the “hot dog of concentrates” critique of distillates:

“Until I came to California, I never had seen or heard all of the negative association with distillates, and realized that it was because this isn’t a market like Colorado, where there was this excess amount of extra material on an annual basis, because all the outdoor comes out and people are selling it cheap,” he said. “Or a lot of people are just blasting ‘dirty oil,’ or people have stuff riddled with pesticides, and they turned it into oil, but it’s just sitting in a bucket somewhere.”

“And there was a whole slew of processes where people would take that, and turn it into what becomes very ‘pretty oil’ once it’s fractionally distilled,” Bonvillain added. “Then, they can sell that off, and so distillates got this reputation of, ‘I can turn poop into gold,’ and, that has negative connotations with it.”

One reason that the “hot dog” criticism is levied is due to the presence of pesticides in concentrate and even distillate products.

Bonvillain’s take on this ever-present concern: “Just like with all the pesticide-riddled oil, it’s the responsibility of the distillate providers looking to make quality products to use the best flowers and oil. Because Adam [Lustig] and I both, we grow all our own flowers that are going into our distillates. The reason we make distillates is when I have a product that I want to achieve ultimate clarity, ultimate concentration, that’s just the process I take it through. It’s actually still single-source organically grown whole-plant, or even just flower. We’ve taken ‘beautiful’ looking crude oil that most people would say, ‘What are you doing distilling that?’ But Adam [Lustig] and I, we don’t look at distillation as a way to clean up tainted product—we look at it as a further way to purify high quality product.”

In a pot-perfect world, pesticides present in concentrates and distillates wouldn’t exist because they wouldn’t be used on pot plants in the first place, and ganja growers would solely cultivate with organics, but completely avoiding unwanted impurities is an impossibility—at least in our present climate of cultivation.

David Bonvillain bemoaned the fact that even if cannabis farmers grow completely organic, their outdoor flowers are exposed to wind-swept pesticides used by farmers of other crops that are in close enough proximity to ganja gardens. It’s a larger problem than just cannabis, and one that won’t be easily remedied, unfortunately.

Bonvillain did suggest techniques that can be utilized to combat pesticides, such as changing the pH (acidity) of your distillate solution to further reduce pesticide impurities.

Adam Lustig said flat-out:“The most difficult thing we have found about the distillation process is reducing pesticides and getting them down to zero parts per billion [the ideal weight-to-weight ratio in a cannabis concentration] is something we’ve had to work really hard to get to on a regular bases.This is because distillation, compared to other types of processes,will dramatically intensify the presence of any pesticides whatsoever.And the problem we as a company face is getting quality, clean [crude oil] product on a consistent basis.”

Distillation: The Future Of Concentrates—And Much More
Getting-Near-The-Clear-Guide-To-Cannabis-Distillates-4.jpeg


Much like the larger weed industry that surrounds it, concentrate distillation is ripe for improvement and expansion, both in regard to its own equipment and processes, as well as how it will influence and affect cannabis companies in general.

One drawback to short-path concentrate distillation is an overly long “residence time”—the duration the oil is in the still—which, when subjected to high temperatures, can contribute to degradation of the product.

But new tech developments can negate the degradation.

Root Sciences has developed a wiped-film short-path system enabling distilling cannabinoids at a temperature considerably below their boiling point This results in a highly useful “shelf-stable” product that maintains its color and potency once in a sealed container.

When it comes to the previously discussed pesticide problem, David Bonvillain referenced a chromatography machine manufactured by Buchi that he disclosed to us he was soon planning to demo at his Elite Labs in Loveland, Colorado.He had yet to witness its capabilities first-hand, but he was excited enough about its potentialities to label it a “game-changer” in terms of removing pesticides from distillate oil solutions, “100 percent on the back-end.”

Adam Lustig is likewise optimistic regarding future technological developments when it comes to short-path distillation, and he fully expects the continued development of better quality equipment that will enable purer fractional distillate with less runs and superior filtration.

Lustig added: “You’ll see our industry modifying, adapting and fine-tuning the tech used in the botanical extraction industry as a whole.Making things stronger, faster, better.”

One of the exciting aspects to distillate production is the potential to create and innovate.

To that end, Lustig’s aforementioned company Higher Vision has crafted “Super Oil,” a blend of pure THC distillate and those clean, live cannabis terpenes, both derived from the same original source with absolutely no additives.Super Oil’s universality is such that is is fully dabbable, vapeable, edible and entirely topical—Lustig suggests coating a joint with Super Oil before lighting up.

And Higher Vision’s website promises that Super Oil is “only the beginning,” as the company plans to create more groundbreaking concentrate distillate products utilizing their singular approach of “conscious cannabis chemistry,” as Lustig describes the Higher Vision process, defined by the use of organic, environmentally sustainable and health conscious materials.

David Bonvillain anticipates the establishment of larger-scale systems for increased concentrate oil mass production to play a large role in the billion-dollar legal weed industry.

In his own colorful way, Bonvillain offered a summation of the impact he expects distillates—as well as isolates such as THC-free, solely CBD-based oils—will have as the legalization market expands exponentially: “Distillates and isolates represent the future of ancillary cannabis products (edibles, vapes, oils) and broader acceptance and infusion into everyday life.”

“As much as I’d like to be the dirty stoner and say, ‘No, man, it’s just flowers and dabs, there’s where it’s at, man,’—that’s not reality, that’s not how manufacturing products work when it’s done on a massive scale,” he said. “It’ll be concentrate distillation.”
 

roots69

Support BGOL
Registered
Handle with care!!



The 12 Most Potent THC Concentrates

If you’re looking for the strongest THC concentrate, you’re in luck. You’re about to discover the most potent THC concentrate of all.


what-are-thc-concentrates-bho.jpg

Shutterstock


The world of cannabis concentrates is blowing up. For many people, dabbing is the future of weed, and concentrates are where it’s at. Concentrates are known for their purity. They’re known for having terpy flavor profiles and for having some of the strongest concentrate THC levels. While any experienced dabhead will tell you that a good dab isn’t exclusively about finding the strongest THC concentrate, potency is still a big piece of the equation. Here are 12 of the most potent concentrates currently on the market. If you’re looking for the most potent THC concentrate, you’re in the right place.

12792174_955116154566441_4399424516810381613_o.jpg

Courtesy of Concentrate Remedies

Concentrate Remedies’ Bubba’s Deadhead Girl
With some of the strongest concentrate THC levels on the market, this dab is made from a combo of Bubba Kush, Deadhead OG, and Cookies. The final result is a hard-hitting concentrate with just under 80 percent THC. To be more precise, most samples of this concentrate come in right around 79.8 percent.

Dandy’s True OG
The True OG strain is an indica that generally produces heavy sedating and relaxing sensations. Those bodily experiences are on full display with Dandy’s concentrate version of the strain. Don’t expect to be doing much of anything after dabbing this concentrate. At 82 percent THC, this is a strong contender for the title of most potent THC concentrate.

31676802_1808984605830673_2139928362439671808_o.jpg

Courtesy of Alpine Alternative

Alpine Alternative’s Legend OG
The Sacramento-based company Alpine Alternative has created a go-to favorite with its Legend OG concentrate. In particular, they’ve created one of the strongest THC concentrate products you can find. The product consistently maintains THC levels around 82 percent. It generally gives users a powerful mix of cerebral highs mellowed out by a pronounced calming body effect.

Leef’s Cheese Quake CO2 Oil
With roughly 88 percent THC and a genetic profile that leans toward indica, you can rely on Leef’s Cheese Quake CO2 oil to give you a clean, smooth, tasty experience. If you’re looking for the most potent THC concentrate, this one will put you on the right track. While its effects will center in your body, a lot of consumers report feeling a surprisingly strong head high after dabbing this one.

Dabbenport Extracts’ Live Action
Live action dabs are making a big splash at Cannabis Cups recently. In particular, Dabbenport Extracts is turning out some super potent, incredibly pure product.

The “dewaxing” process, in which all crude oils are removed through multiple low-temp filterings, is what makes these concentrates unique. Dabbenport’s live action concentrates are usually in the high-80s when it comes to THC content. That makes this one a solid choice when it comes to getting the strongest THC concentrate.

21054949_1793684227312463_5873570303187986544_o.jpg

Courtesy of The Clear

Clear Concentrates’ The Clear
Over the last couple of years, Clear Concentrates’ signature dab, The Clear, has established itself as a perennial powerhouse. With some of the strongest concentrate THC levels, it’s quickly becoming a fan favorite. Most products are in the high 80s in terms of THC content. But some samples have reportedly tested as high as 96 percent. At that point, you’re getting into some next-level purity.

SpOILed Patients Collective’s SugErrl
Another example of live action concentrates, SpOILed Patients Collective’s SugErrl is rapidly becoming one of the company’s flagship products. In particular, it’s building a reputation among dabbers looking for the strongest THC concentrate.

Like Dabbenport’s live-action dabs, SugErrl is incredibly pure. Its texture is interesting, often a mix of crystals and oil that usually ends up going one way or the other. Regardless if you’ve got a crystalline product or an oily one, it’s going to be super tasty and super powerful. Definitely ranking high on any list of the most potent THC concentrate.

T-Rex Concentrates’ Predator Pink BHO
This BHO dab reportedly tests at the 92 percent mark. While it might not be quite as tasty as other concentrates on this list, if you’re in it for the strongest concentrate THC levels, it’s hard to do much better than this one.

12489399_1669525749989235_7892768041001543700_o.jpg

Courtesy of Dream City

Dream City’s Concentrates
Dream City should make any Western Washington dabhead proud. Their concentrates are always some of the most potent around. In particular, a lot of their products are known for hitting the 93 percent mark, if not slightly higher.

The only potential drawback for terpene purists is that some of their concentrates reportedly add terps back in after the extraction process. But if you don’t care about those nitty gritty details, you’ll love the strong flavor profiles and high THC levels in these dabs. And, of course, if you’re looking for the most potent THC concentrate, you’ll love the power of these dabs.

CrX Concentrates’ Live Resin
CrX Concentrates produces a line of live resin that is known for delivering a power-packed punch of THC. These dabs are recording some of the strongest concentrate THC levels anywhere. And since it’s live resin, these concentrates were originally extracted from fresh flower, rather than dried bud.

For many consumers, live resin preserves both terpenes and THC at incredibly high quality. If you live in an area where you can buy CrX live resin, check with your budtenders for specific stats about THC content, as it varies run-by-run.

Purity Extracts’ Gorilla Glue
Purity Extracts has hit a home run with its GG4 extract (formerly known as Gorilla Glue). If you’re trying to find the strongest THC concentrate, this one’s a home run. Most reports indicate that this concentrate regularly reaches 96 percent THC.

This is probably a bit heavy-handed for most weed smokers, but hey, this list is all about the most potent concentrates and this one is tough to beat in that category.

22730522_1602337629802111_4094428823443436307_n.jpg

Courtesy of Guild Extracts

Guild Extracts’ THCA
A lot has been said about THCA crystals in recent months. And for good reason. This is an interesting type of concentrate. Technically, it doesn’t have any THC when it’s raw and on its own.

Instead, it’s pure THCA, the non-psychoactive cannabinoid that eventually converts into active THC when cannabis is decarboxylated. As soon as you get a THCA crystal hot enough, it instantly turns into pure THC. And that means that you’ll be getting pretty much pure THC—making THCA crystals the most potent THC concentrate you can find.

The Most Potent THC Concentrates
In many ways, concentrates show just how far the world of weed has come. Of course, devoted weed smokers have always been using some form of concentrate.

Traditionally, concentrates were more along the lines of low-tech hash and other similar forms of cannabis. And while today’s cannabis scene is definitely more high-tech and precise, the same energy continues to motivate the quest for purer, more potent forms of cannabis.
 

roots69

Support BGOL
Registered
15 HEALTH BENEFITS OF CANNABIS AND HEMP OIL FOR PAIN YOU NEED TO KNOW



Cannabis oil is widely beneficial and is considered as one of the most effective oils for the alleviation of certain conditions and illnesses.

Researchers believe there are at least two active chemicals in cannabis that have medicinal applications: cannabidiol and tetrahydrocannabinol. Cannabidiol, also known as CBD, impacts the brain without a high, and tetrahydrocannabinol, also known as THC, has pain relieving properties.

The health benefits of cannabis oil are caused by these medicinal applications. Here are the top 15 health benefits of cannabis oil:


HEMP OIL FOR PAIN – RELIEVES PAIN
Cannabis oil is often suggested for people who suffer from chronic pain, inflammation and occasionally in emergency pain relief. This is the reason why people who have been diagnosed with cancer turn to cannabis-related products, including cannabis oil, when they need relief from the pain of the chemotherapy or the disease itself.

HELPS CONTROL EPILEPTIC SEIZURES
The effects of cannabis oil/cannabis essential oil, more specifically the cannabinoids such as THC, help to control seizures by attaching to the brain cells that are responsible for regulating relaxation and controlling excitability.

SLOWS ALZHEIMER’S DISEASE
The effects of cannabis oil/cannabis oil benefits may be able to slow the progression of Alzheimer’s disease. THC, the active chemical in cannabis oil, slows the establishment of amyloid plaques by blocking the enzyme in the brain that makes them. Amyloid plaques are what kill brain cell and ultimately cause Alzheimer’s disease.

hearthealth.jpg


IMPROVES HEART HEALTH
The elusive oils in cannabis oil can help improve heart health by balancing out the negative oils that are in a person’s system. In addition, the oil can stimulate antioxidant processes such as maximising the health of the cardiovascular system and scraping off excess cholesterol.

Eases Multiple Sclerosis Pain

One of the health effects of cannabis oil includes the ease of pain symptoms from multiple sclerosis. The THC in the cannabis oil attaches to the receptors in the nerves and muscles in order to relieve pain. There are also studies that suggest THC helps to control muscle spasms.

ENHANCES APPETITE
It’s a well-known fact that those who consume cannabis in any form notice an increased appetite. However, the use of cannabis oil can help you regulate your appetite and encourage hunger. At the same time, it can stimulate your digestive system in order to operate on a regular level.

TREATS INFLAMMATORY BOWEL DISEASES
Studies suggest one of the effects of cannabis oil could aid patients with inflammatory bowel diseases such as ulcerative colitis and Crohn’s disease. The THC and CBD chemicals interact with the body’s cells, which plays an important role in immune responses and gut functions. The THC-like compounds that the body produce increase the permeability of the intestines, which allows bacteria in. The cannabinoids from cannabis oil block these body-made cannabinoids helping to prevent the permeability and ensuring the intestinal cells have a tightened bond.

INCREASES SLEEP LONGEVITY
If you suffer from the constant anxiety during the night time hours, or suffer from insomnia or struggle from getting a restful, undisturbed sleep, then cannabis oil might be the solution for you. The cannabis oil works by relaxing the mind and body, and generating a lower energy level, it will be easier for you to get your heart rate down and clear your mind to allow for a long, restful sleep.

RELIEVES ARTHRITIS
increase-sleep-time.jpg
DISCOMFORT

The health benefits of cannabis oil in regards to rheumatoid arthritis include promoting sleep, reducing inflammation, and alleviating pain. These effects of cannabis oil combined help to relieve the pain and discomfort that people with arthritis have.

REDUCES GLAUCOMA
In regards to eye health, cannabis oil has been linked to the reduction in glaucoma and the prevention of macular degeneration. As people age, eye health is one of the major reasons why people turn to cannabis oil.

SOOTHES TREMORS
The effects of cannabis have been shown to reduce pain and tremors, and improve sleep for those who have Parkinson’s disease. There has also been research that demonstrated improved fine motor skills among its patients.

RELIEVES ANXIETY AND STRESS
One of the most popular and well-known uses of cannabis oil is for the purpose of relief from anxiety and stress. The natural compounds found in cannabis oil are effective for releasing relaxing the mind, releasing pleasure hormone, reducing stress and inducing a sense of calmness and relaxation to the user.

TREATS PTSD
The naturally occurring cannabinoids, similar to THC, contribute to the health benefits of cannabis oil. The cannabinoids help to regulate the system that causes anxiety and fear in the brain and body. This specific use of cannabis oil has been connected to benefiting veterans with post-traumatic stress disorder.

protects-brain-after-stroke.jpg
PROTECTS BRAIN AFTER STROKE

Research shows that the effects of cannabis may help to protect the brain from the damage that is caused by a stroke. This is done by reducing the size of the area that was affected by the stroke. There has been research that has shown neuroprotective effects from cannabis that protects the brain in the case of other traumatic events, like concussions.

PREVENTS CANCER
Early reports of research have shown that the active ingredients in cannabis oil can reduce tumour size and have preventative effects on cancer, and says that the oil makes it easier to beat cancer for those suffering with the disease.

If you would like to take advantage of the health benefits of cannabis oil, contact us at CBD International.
 

roots69

Support BGOL
Registered
The Positive Effects of Cannabinoids

remote.axd
Health/Science
The chemical compounds found in the Cannabis plant, called cannabinoids, offer a variety of health benefits. While there are over 80 different cannabinoids in marijuana, only a handful have been researched and are known to provide positive effects on the human body. Understanding how cannabinoids affect the body helps you find the right strain for your individual needs.

Tetrahydrocannabinol, or THC, is the most well-known cannabinoid due to its euphoric and psychoactive effects on your body (i.e.; the "high"). THC can alter behavior, consciousness, mood and perception. Marijuana is often prescribed as a pain killer -- one of the main health benefits of THC. THC is commonly used to stimulate your appetite.

THC-A is the acidic form of THC known as tetrahydrocannabinolic acid. THC-A is the biosynthetic precursor for THC without any psychoactive effects. A variety of pharmacological effects are associated with THC-A, including anti-inflammatory, antiemetic, anti-prostate cancer, anti-vomiting and neuroprotective. Purified THC-A forms an unstable powder.

Tetrahydrocannabivarin, or THC-V, is a homologue of THC found naturally in the Cannabis plant. THC-V has a propyl side chain group on the molecule which can affect your body much differently than THC. This cannabinoid is often associated with appetite suppression, reduced blood sugar and bone growth stimulation.

Cannabinol, abbreviated as CBN, stems from cannabigerolic acid. CBN is the cannabinoid responsible for inducing sedative-like effects. You might want to reserve strains with high levels of CBN for use before bed. CBN is also used as an anti-bacterial and may reduce muscle spasms.

Most health benefits of marijuana are associated with the cannabidiol cannabinoid, known as CBD. Marijuana products are often enhanced with CBD to provide more potent effects. Choose a strain with high levels of CBD if you're looking to use marijuana as an alternative form of medication. CBD is also used to treat Dravet syndrome, sold under the drug brand name of Epidiolex.

Some other common cannabinoids include CBD-A, CBC, CBC-A, CBG and CBG-A. Use the "Health Effects of Marijuana" chart, below, to identify which cannabinoids induce the effects you're looking for.

Health Effects of Marijuana
Health-Effects-of-Marijuana-Reduced.png
 

roots69

Support BGOL
Registered
Can You Tell if a Cannabis Seed is Male or Female?

remote.axd
Growing
When it comes to growing cannabis, sex is important. Not that kind of sex! We’re talking gender, as in being able to discern male from female. The reason for this is simple enough: only female seeds produce flower, also known as the buds you might have in your stash as we speak. When it comes to growing cannabis, seeds can be male, female or hermaphrodites. Females produce the resin-secreting flower, and males make small sacs of pollen near the base of the leaves. Over the years, cultivators have learned that un-pollinated females (remember, males produce pollen) continue to make resin and flowers that have not been pollinated are much more likely to produce high-potency cannabis. But is there a way to know if a seed is female before growing?

Determining if a Seed is Male or Female
If what you’ve got is a handful of seeds, it’s pretty much impossible to tell which ones are male or female. The only way true way to tell the plant’s gender is to plant some seeds, then wait. After a period of several weeks, it will begin to pre-flower, or form a small bud in the crux of a branch. One of the first signs your cannabis plant is female is the appearance of pistillates that are wispy and generally white in color.


male-female.jpg

And example of eary stage female (left) and male (right) cannabis plants.

If you’re looking for more precise, science-based methods to tell your plant’s gender, there are several labs that can sex your plant right after germination – eliminating the lengthy (usually around 6 weeks) wait to learn its gender. Portland, Oregon start-up Phylos Bioscience is in the business of studying cannabis genetics, and they sell a “plant sex kit” that’s pretty simple to do, even for the not scientifically-inclined. Simply press a cotyledon, or embryonic leaf, onto the kit’s filter paper and send it to their lab. They then test the leaf for the “Y” chromosome to determine its gender, just as would happen for a human male.

What are Feminized Seeds?
While it’s basically not possible to determine the sex of a seed from a random bag of seeds, a practice known as feminizing is becoming quite popular. Feminized seeds are selectively bred to produce female plants, however, some growers do worry about some feminized seeds turning into hermaphrodites.

Despite the potential for hermies, if growing cannabis is more hobby than full-time endeavor, and you want to guarantee you’ll have some consumable product, knowing your seeds are female from the beginning is probably your best bet.
There are many companies that sell feminized seeds, but, buyer beware, do your research to make sure the seller is reputable, especially if purchasing online. Thanks to modern technology, most feminized seeds from reliable brands will be 100% female as advertised – but that doesn’t mean there aren’t people selling low-quality seeds out there.

Methods for Feminizing Cannabis Plants
If you have some experience growing cannabis and would like to bend a crop to your will to ensure that the seeds will be female, there are a few feminizing methods you might try. One such technique is to literally stress out a healthy female plant by interrupting the light cycle during flowering, called Rodelization Feminizing.


male.jpg

Through feminizing, you can eliminate the presence of male plants (pictured above).

In the colloidal silver feminizing method, distilled water is mixed with pure silver and sprayed on female plants. This method works best when the plants are flowering. This results in pollen sacs being formed, which will allow the seeds to produce female plants.

Feminizing via the silver thiosulfate technique involves carefully selecting a nearly mature female plant, then spraying it with 50/50 mix of sodium thiosulfate and silver nitrate. This triggers a gender change, from female to male. Place this plant back with the others to pollinate other female plants, and female seeds are created.

How Important is Your Plant’s Sex?
How much time you want to spend figuring out the sex of your cannabis plants really depends on how much time and energy you’d like to devote to growing your own marijuana. If you are a medical cannabis patient or caregiver, for example, and need to know what kind of cannabis you are getting every time, buying feminized seeds from a trusted seller is the way to go. But, if you have some time, consider yourself a green thumb, and want to experiment with your grow, you could simply plant your seeds and see what comes up. Happy growing!
 

roots69

Support BGOL
Registered
Marijuana Growing Overview: Helpful Tips Before You Start Your Grow

remote.axd
Growing
So you live in a state where marijuana is legal and want to start up your own grow. But what does that really entail? Setting up a home grow can be much more challenging than expected and takes patience, persistence and a strong desire to solidify and refine your craft. Sound like a challenge you’d like to embark on? Then you’ve come to the right place; we’ve collected some great tips and created an expert overview of how to grow marijuana at home.

For those who haven't tried their hands at growing yet, don't expect your first trip around the block to result in big yields and epic bud production. Most cannabis growers have been refining their crafts for years, so new cannabis growers must be patient and really work at it to have high cannabis yields of nice buds.

It is important to understand this article is simply a basic overview of the different stages and aspects of growing and is not a sufficient source for in-depth tutorials. In combination with other resources and hands-on practice, though, this overview will be a great jumpstart to your growing journey. Gaining a baseline understanding will help tremendously as you advance in skill and move along your cultivation career.

Understanding the Law
Before you purchase anything or begin to plan the implementation of your grow, some thought must go into the legality of growing marijuana at home. While there are many states that allow home grows, the laws differ individually. For example, in Colorado, you may grow up to six plants per adult. In Washington state, however, home growing is actually illegal – even though marijuana is legal.

Because there are many different laws and stipulations at play, be sure to research the limitations of what you can and cannot do legally to ensure you avoid run-ins with law enforcement and are always operating within the confines of the law. Remember, just because marijuana is legal in your state does not mean there aren’t rules!

Selecting the Right Growing Set-Up/Medium
When starting a home grow from scratch, there are a few things to consider right off the bat. First, you must select a grow space and decide if you want to grow marijuana indoors or outdoors. If you’ve chosen indoors, then the next aspect to consider is the housing, or set-up, that will contain your plants and grow lights. Currently, there are seemingly endless options for those looking to purchase a grow box to cultivate their marijuana plants indoors. From ready-to-go grow tents to fully-equipped hydroponic kits, the retail marijuana growing industry is just about as expansive as any other market. Some boxes even come with automated electronics and nutrient delivery systems. Obviously, these products come at varying prices but generally are not cheap. However, they do offer a certain convenience that is worth noting.

With that being said, your first decision before growing weed indoors at home is to choose whether you want to buy a grow environment or create your own. Creating your own growing environment will obviously be more time-consuming and involve a degree of manual labor, but in the end will be marginally cheaper than a retail set-up. Plus you get the added satisfaction of having created something with your own hands – which is always nice.

Once you have decided on your environment, you now must decide if you want to grow hydroponically (hydro) or with soil. Each option has its benefits so be sure to do some research on which will be most economical for your situation. Hydro growing offers easier nutrient level monitoring and cuts down on harvest times while soil provides more robust flavor and requires less attention to detail during feeding.

If you select hydro, be sure to research different growing mediums. From coco to rockwool, there are many options to choose from. So do some research and pick which option works best for you and your cannabis grow.

After selecting your ideal environment/set-up, it’s time to start growing. The following sections provide an overview of the different stages your plants will undergo during their lifespan. Understanding these stages will allow you to better plan out your growing cycle and effectively produce healthy plants.

Choosing Seeds or Clones
As many of you know, there are two ways to start a grow: marijuana seeds or clones. Each option has pros and cons and ultimately it’s up to you to decide which method you want to pursue. Starting from seed is a classic way to cultivate marijuana and gives you the satisfaction of growing something from the ground up. Starting from seed does take a bit longer and there is a chance of ending up with a male or other problematic characteristics, but if done correctly can produce a great plant to take clone cuttings from in the future.

Clones are a much quicker option and can reduce the development period from 6-8 weeks to about 7-21 days. Clones are an exact replica of the mother plant they were taken from, ensuring consistency in the purity and potency of the strain. Starting from clone helps reduce the sexual identification process and labor early on, but if the clone was stressed or taken from an unhealthy plant, you will have issues moving forward. Our best advice is to google some additional research and figure out which option is best for you. Either route you embark on will yield excellent results if done properly. If you do choose to start from seed, be aware that they must first be germinated into sprouted seedlings before entering the propagation process.


seed-pic.jpg

Photo credit: "thöR


Stages of Growth
Technically speaking, there are three stages when growing a marijuana plant: propagation, vegetative and flowering. Harvesting could also be considered a stage but since the plant is no longer growing after it is cut down it can go either way. For our purposes, we have left out harvesting from the stages of growth section.

Attention to detail in each stage is crucial for growing high-quality cannabis, as errors or neglect will lead to issues down the road throughout the entire process. It’s also important to make educated decisions when performing plant work during each stage. Understanding what actions need to be done when will help your plants remain healthy and allow you to have a much easier time growing your cannabis.

During propagation, the plant begins its journey to becoming what is commonly known as marijuana flower. In this stage, the seed or clone begins to develop a stable rooting system for proper nutrient intake and the leaves, or foliage, begin to flourish. A plant in propagation is very fragile and must be regulated very carefully. Lighting, temperature and humidity must be controlled intently to ensure proper plant health and vigor before moving into the vegetative stage.

The vegetative stage is when the plant really begins to take form. During vegetative growth, the leaves of the plant will start looking more like a traditional cannabis plant and the roots will continue to build a more robust system. In turn, the plant will grow taller and become more able to absorb nutrients. During the vegetative stage, a plant may grow up to two inches per day. This rapid growth is one of the more exciting stages in the process and the duration depends on the amount of light exposure the plant receives. Plants grown outdoors is highly dependent upon the region you live in and the amoun of direct sunlight they recieve. Hypothetically, you could keep an indoor cannabis plant in the vegetative stage for pretty much as long as you want. Ideally, you want to strictly monitor and regulate the light exposure your plant receives during the vegetative stage. Once your plant has completed the vegetative stage, it is ready to start flowering.

The flowering stage is the final stage for your plant and is responsible for producing the final product of dried marijuana that we have come to know and love. When a plant reaches the flowering cycle, it is sexually mature and will produce resin on the epidermis of the leaves and become denser and centered on the buds, or flowers. This is when the classic looking nugs come into form. The length of the flowering stage depends on many variables, such as strain and species, but generally will last about 7-10 weeks. The longer the flowering stage, the more likely you will have bigger yields.

Harvest/Processing
Once your plant has finished the flowering stage, it is ready to be harvested, meaning the entire plant gets chopped down. You’re not quite ready to start smoking your bounty just yet though, as there are still a few more steps. The first step will be to conduct a quick wet trim to remove larger fan leaves from the plant. After that, the plant must dry and cure for a calculated amount of time. Bigger buds will take slightly longer to cure than smaller, popcorn nugs so be aware of the differing rates. During the curing stage is when the harvested flowers dry out and start looking more like the cannabis you can buy in a dispensary. After curing, the last step is a dry trim to remove all of the excess leaves from the flower of the plant. Trimming is a very meticulous process and is really up to the grower to determine how thorough of a job to do. Be sure to save your trimmings though so you can make some delicious edibles or bubble hash!

After your buds are cured and trimmed, you’re ready to enjoy the fruits of your labor in the form of some good cannabis. So gather your favorite smoking apparatus, light up and enjoy the satisfaction of consuming something you have grown with your very own green thumb.
 

roots69

Support BGOL
Registered
Tips for Growing the Best Pot in Your DIY Greenhouse
remote.axd
Growing
Though it certainly is nice to be able to visit a dispensary for the perfect strains of bud, growing your own marijuana is so much more rewarding. Not only can it save some serious cash (especially if you smoke as much as I do), but it helps settle concern regarding cultivation practices (you know exactly what fertilizers and pesticides have been used to grow the herb) and helps you gain a true appreciation for the time and effort involved in cultivating cannabis. Growing your own cannabis can also be a great way to experiment with cross-breeding, too!

But, growing your own marijuana is not the same as popping a tomato plant into the ground. In order for a cannabis crop to produce a large, high-quality harvest, it requires proper fertilization, diligent pest control, the right balance of heat and humidity, and a very precise lighting schedule. Creating the ideal environment indoors is a popular option but may require a large investment of both time and money, and growing outdoors only allows for a single harvest each year and includes the disadvantage of a potentially insecure grow area.


aug-seedlings.jpg


Greenhouses combine the benefits of both indoor and outdoor grow areas by expanding the grow season, utilizing solar power whenever possible, securing the grow area from pests and intruders and shielding the grow area from the view of passers-by. However, the strict photoperiod of many cannabis strains (except for autoflowering strains) and other crop requirements means that ganja greenhouses have to include a few important features.

Things to Remember When Growing Cannabis in a Greenhouse
  • Year-round cultivation may require supplemental lighting and black-out screens: In order for cannabis to grow, it needs a precise light cycle: 16 - 18 hours of light during the veg stage and 12 hours of light (only) during the flowering cycle. Transitioning from a veg to flower light cycle happens naturally outdoors as the seasons transition to autumn but can be mimicked with the use of black-out screens (or even a tarp thrown over the enclosure at the correct time every day). Likewise, when trying to grow plants larger during the veg stage, supplemental lighting may be needed during short winter days.
  • Greenhouses can get HOT: To keep your girls growing strong, it is important to keep them as comfortable as possible. Unfortunately, greenhouses tend to trap heat making the plants much more susceptible to heat stress during warm summer months. This can be remedied through intake and exhaust fans to help maintain an ideal temperature of around 70 to 80 degrees Fahrenheit.
  • Off-grid solar kits can help maintain an ideal environment: The sun can (and should) be used for more than photosynthesis. To help control the cost of year-round greenhouse maintenance, off-grid solar kits can be a great investment. Use them to power ventilation and humidity controllers, supplemental lighting or just some good ol’ tunes to help keep you (and your plants) happy.
  • Greenhouses are most effective when they are secure: To grow personal cannabis, the grow area should always be secured from intruders or young people which can be accomplished with the addition of a simple lock on the enclosure or surrounding fence. But greenhouses should also be secured from pests and invasive plants as well. This can be accomplished with the use of bug screens on doorways, and fabric weed barriers lining the greenhouse floor.
DIY Greenhouse for Your Cannabis Grow

aug-greenhouse.jpg


You can create your own cannabis greenhouse relatively easily without having to invest a ton of money in a professionally-build enclosure. To learn the basics of creating your own DIY greenhouse, check out this video by Jorge Cervantes, self-appointed ganja guru and author of numerous cannabis cultivation reference guides.

Now that marijuana reform is spreading across the nation, more and more places have approved personal marijuana cultivation. While only Colorado, Oregon, Alaska and the District of Columbia allow personal cultivation of recreational plants, many others allow cultivating cannabis for medical purposes. Cannabis cultivation laws vary by state so check local laws before starting your grow.
 

roots69

Support BGOL
Registered
Growing Marijuana in Soil vs Hydroponic Systems
remote.axd
Growing
Cannabis, like many plants, can be grown in more than one way. Most people think of roots growing in soil, but hydroponics offers the ability to work in smaller spaces with more control over your green’s food source. If you’re looking for flavor and forgiveness in the occasional mistake, take up the traditional soil method. Of course, any experienced grower will have a preference with first-hand accounts of why they stick with their technique. If you’re looking to plant a marijuana seed and help it grow, there are a few things you should consider before planning things out.

Soil
Cannabis plants prefer rich soil that allows for maximum drainage, in fact, many growers switch out soil for perline to increase drainage. Nutrient rich materials like earthworm castings or manure can be added to improve the health of your greens and make sure the crop gets everything it needs. Plants absorb nutrients from soil, so during the flowering stage it’s important to use just the right kind and amount of nutrients to maximize your yields and prevent any a nutrient deficiency. Even with the best soil you will still need to supplement some nutrients to maximize your results.

Pros/Cons
Pros:
  • Can be more forgiving for inattentive growers
  • Growing in soil is easier than some types of hydroponic growing
  • Better flavor in the end
  • Natural product
Cons:
  • It takes up a lot of space
  • It is usually more expensive
  • Problems take longer to become evident and be recovered
  • Doesn’t produce as high of a volume of nutrients than hydroponics do
Hydro
Hydroponics is growing cannabis by using any growing medium other than soil. These alternatives (which are often combined) include gravel, coco coir, sand, mister air, vermiculite, peat moss, perlite, hydroton, and/or just water. During the entire process you must provide the plant with all its nutrients by way of its water supply.

Hydroponic systems come in different forms, here are the top 5 common forms: aeroponics, deep water culture, drip irrigation, nutrient film technique, and ebb-and-flow.

1. Aeroponics
Aeroponics uses a grow chamber to suspend roots in the air with no medium inside of a closed-loop system. Water, rich with nutrients, douses the bases of these plants as they hang in the air. By providing an oxygen-rich environment, the microbes on the plant are able to digest and process the nutrients for its circulatory system.

2. Deep Water Culture
Deep Water Culture is a method of growing which uses a bucket of nutrients, also called bubblers. The plants are suspended over the nutrients as the roots grow into the nutrients below. The bubblers’ mixture is filled with air using an aquarium pump and pays off by speeding up the growtime. The oxygen and fertilizer enriched mixture work wonders for the end product.

3. Drip Irrigation
The drip irrigation system feeds each plant individually in its own chamber. Nutrients are administered by a dripper, and then the solution is recycled, much like the already mentioned methods. Each plant is located in separate chambers where the nutrients are fed to the medium by means of a small dripper.

4. Nutrient Film Technique
The Nutrient Film Technique is a hydroponic method which involves a nutrient solution being pumped onto a tray or gulley to form a shallow and slow moving film that moves through the plant’s roots. These roots grow into the solution, creating a large root mat in the tray. Having round the clock access to water and nutrients along with more than enough oxygen for the roots, makes for rapid development with maximum yields.

5. Ebb-And-Flow
Ebb and Flow replaces soil with a medium like rockwool to produce very large yields. This type of system stimulates a natural cycle of rain and the time in between it, therefore giving off a more natural environment for your grow.

Pros/ Cons
Pros:
  • Maximize yields by accurately providing just the right amount of nutrients to your cannabis
  • Soil born diseases and pests are less likely because of the lack of soil and the grow is usually indoor
  • Larger yield
  • Problems are easier to correct because you’re more in control
  • Doesn’t take up a lot of space
  • Get a result quicker
  • Better looking product “in the bag”
  • Grows are able to be automated by using techniques like bubbleponics and deep water culture
Cons:
  • A lot more maintenance cleaning the equipment
  • Doesn’t taste as well as soil grown
  • Need to pay a lot of attention during the entire process
 

roots69

Support BGOL
Registered
What to Look for When Buying Cannabis Seeds

remote.axd
Growing


It’s not too early to start planning an outdoor garden. Aside from determining the layout, working the soil and gathering supplies, home growers should begin stocking up on seeds in preparation for early germination to ensure plentiful garden growth for a fraction of the cost of store-bought plants. The same can be said for growing cannabis from seed.



Benefits of Growing Cannabis From Seed
Though many indoor cultivators prefer to grow their cannabis from clones, opt to start from seed for many different reasons. One common reason is the seed’s ability to produce a “tap root” which anchors the plant in the soil. Clones are not able to produce tap roots (only fibrous root systems) and are therefore less sturdy and less capable of absorbing nutrients. Tap roots dig deep into the ground in search of water and nutrients, which is especially valuable in outdoor environments.

There is also a greater variety of seeds available (as opposed to clones) which is ideal for medical patients or anyone interested in a customized cannabinoid content. Online seed banks are known to sell seeds from many breeders and can often ship anywhere in the world, but often vary in quality and always come with the risk of confiscation (as it's illegal to mail marijuana products to or within the U.S.). For those living in states where it is legal to cultivate cannabis, your best bet will be to purchase seeds from local, legal marijuana businesses.





Cannabis plants grown from seed also tend to experience less stress resulting in a higher yield, better resin production and an increased likelihood of survival. They are also less likely to experience transplant shock when transitioning from an indoor to an outdoor grow environment and better for breeding because of the chance of a male plant (if breeding is not an objective, male plants should be removed from the grow area as soon as possible).

Things to Consider When Choosing Strains
Gardening requires a lot of planning and cannabis cultivation is no different. Some of the things to consider when choosing the best cannabis seeds include:

  • Space restrictions:
    Indicas consume less space than sativas, which can be traced back to their origins. For example, indica strains originated in areas with fluctuating weather conditions resulting in plants that grow smaller, quicker and more hardy. Whereas sativa strains, which originated from equatorial regions of the globe, tend to grow larger and require more time to mature. Indicas are therefore more common for indoor grows and sativas for outdoor grows.
  • Grow requirements:
    Some plants are more finicky than others. To produce the best yield, growers should consult breeders or seed banks about the best practices for growing a specific strain including nutrient requirements and average grow time.
  • Personal preference:
    Above all, buyers should purchase cannabis seeds based on their own personal preference. This is the perfect opportunity to grow popular or unique strains, or just stock up on an old favorite to avoid excessive trips to a dispensary.
Distinguishing Cannabis Seed Quality
Leftover seeds from sacks gone by are very different from seeds in a seed bank or dispensary; they may be male or hermaphroditic, weak and unable to germinate or prone to stress and genetic disease – or they may not.

It is possible to determine the quality of cannabis seeds based on their appearance, however. For example, immature seeds (seeds that are small, brittle, shriveled and a light green or grey) and old seeds (seeds that are cracked and dry) have a low success rate for germination. These can be planted (and may even produce flowers) but should never be purchased.

Healthy seeds should be dark brown with a glossy finish and free from cracks. The shell should be very firm (it shouldn’t break under minor pressure) and stored in a cool, dark, air-tight container.

Feminized vs. Standard Seeds
Many cannabis seed distributors sell feminized seeds for a slightly higher price tag than standard seeds due to the effort involved in their production and the increased likelihood of producing a female plant. This is especially favorable for personal growers who are strictly limited on their plant count.

Feminized seeds are produced by either cross-breeding two female plants (one of which has been stressed to the point of becoming hermaphroditic) or forcing a single female to become stressed and pollinate herself. The results are an almost guaranteed female (otherwise hermie) plant every time.

Growing marijuana is not only an adventure, but an expression of our new-found freedom in the US. If you’ve been thinking about growing your own marijuana, consider starting with seeds for both stability and an awesome variety.
 

roots69

Support BGOL
Registered
Why Marijuana Should Be Removed from the Controlled Substance Act

remote.axd
News
In our grand quest for cannabis reform, we often hear fellow advocates insist that cannabis should be rescheduled. It makes no sense for it to be classified as a Schedule I substance, after all, because contrary to other Schedule I substances like Heroin, LSD and cocaine, cannabis doeshave proven medical value and only a smallchance of addiction.

Unfortunately, proof regarding the medicinal value of cannabis cannot be attained easily to knock it down a classification or two due to strict guidelines regulating research procedures. Not only is it difficult to get approved for cannabis research, for example, but acquiring quality samples is nearly impossible, too, as all cannabis to be studied must come from a single, government-owned location. This doesn’t even touch on the complexities of actually studying the stuff!

Which brings us to our main point: Cannabis should not be listed as a Schedule I substance and it’s time to change it. But what is the best way to go about this?

Before chiming in with the standard “#rescheduleit” response, let’s take a look at what that really means.
What Does It Mean to Reschedule Cannabis?
The Controlled Substance Act (CSA) is part of the Comprehensive Drug Abuse Prevention and Control Act of 1970 (pdf). It is used to regulate the manufacture, distribution and possession of many drugs and does so by classifying certain drugs into categories and regulating each category individually. Cannabis is listed as a Schedule I substance because it is purported to have no known medical value and a high risk of abuse.

But, as most of us already know (including the U.S. government which holds numerous patents on cannabinoids), cannabis does, in fact, hold amazing medical potential – it can help treat epilepsy, PTSD, cancer and depression just to name a few – which immediately implies that it is in the wrong class. However, because the DEA requires that Schedule II substances be well-researched and understood by the medical community, its lack of research is literally blocking it from being rescheduled in the first place. It’s a terrible catch-22 that would be remedied through reclassification.

Rescheduling cannabis to a Schedule II substance or less would improve our ability to research cannabinoids thoroughly. It would increase the number of facilities that could cultivate it for research purposes and help encourage study participants to join and follow through with research. This would lead to a greater understanding of the plant’s medical benefits and allow doctors to prescribe it nation-wide (instead of just “recommending” it like they do now). The people who have a medical need for cannabis would have access to it, allowing marijuana to improve lives rather than jeopardizing them.

Considering all of this, it makes sense to push for cannabis to be rescheduled to a Schedule II or even Schedule III substance, right? Not so fast.


Schedule II substances, which have proven medical value but high risk of addiction (oxycodone, methadone, opium, etc.), are tightly regulated by the FDA. Whereas Schedule I drugs are simply illegal across the board, Schedule II drugs must follow rigorous testing and meet a very specific set of standards before hitting the market. The process is both timely and costly, and would likely push most small-time businesses out of the marketplace all together. Big cannabis companies would take over, threatening a monopoly on the industry and thus price gouges, especially considering that personal cultivation would officially be illegal as a Schedule II substance, as well.


live-marijuana-plant.jpg

Rescheduling cannabis to be a Schedule II substance would mean the end for home-growing.

An Alternative to Rescheduling Cannabis
In 2015, Senator Bernie Sanders proposed a bill (pdf) that would remove cannabis from the controlled Substance Act all together. Though the bill unfortunately did not pass, it did make huge waves in our collective understanding of substance classification laws. Descheduling cannabis (removing it from the CSA) would put it in the same category as tobacco and alcohol which are unregulated by the CSA.

Descheduling cannabis would leave the door open for new federal cannabis regulations, similar to those in place for alcohol and tobacco, without forcing us to throw out what regulatory framework we already have in place.
Cannabis has been misclassified since the inception of the Controlled Substance Act. It’s erroneous label has forced many people to suffer needlessly by either not receiving the medicine they need; being punished for using/distributing a plant; or being condemned by family, friends, and employers for medicating and relaxing with a substance that has been proven safe for consumption.

In doing, the FDA has implied that they do not have the best interest of the American people at heart – if they did, they would have tackled this issue long ago. This has led to great distrust and a greater willingness to break established laws.

By removing cannabis from the CSA, we would open the path towards a greater understanding of cannabis (including both its social and physical impact), improve the lives of those who need it for medical purposes, and support an industry by and for the people. It’s important to demand change, but we have to make sure we understand the implications of our demands before we do.
 

roots69

Support BGOL
Registered
Policing the Failed War on Drugs

remote.axd
News
When the DEA failed to reschedule cannabis, it struck a chord in millions of Americans. Though legislation has been passed disallowing federal intervention in medical marijuana states, the same cannot be said for those in states maintaining an illegal status. The unfortunate result of this is the continued occurrence of marijuana being used to justify wrongful police conduct.

Policing the Failed War on Drugs
Richard Nixon’s “War on Drugs” has been a huge failure with only a 1 percent efficiency rate in terms of drug production, transportation and use according to some estimates. Where it has had an impact is among American citizens – primarily minorities – who face severe punishment for drug use. Perhaps a more apt title for the War on Drugs would have been the “War on Drug Users” because users and their families are the ones who feel it the most.

Individuals in illegal states are especially vulnerable to property seizures, raids, child abduction and personal harm because of their cannabis connection. Michael Brown is a prime example of this, having been accused of having marijuana in his system at the time of his unwarranted death. Insinuating that cannabis had somehow made him volatile and aggressive – an unfortunate rhetoric left over from the Reefer Madness era – amplifies fear of cannabis and further supports the perceived “dangers” of the drug, no matter how unfounded.

Marijuana was used to justify wrongful police conduct just a few months after the Michael Brown incident, this time leaving 18-year- old Bryce Masters in cardiac arrest after being tazed and mistreated while unconscious. Officer Timothy Russel claimed to have smelled marijuana when he pulled Masters over, though dashboard clearly shows it was a belated response concocted to justify the unwarranted act.

Though Masters has made remarkable recovery despite having lost his heartbeat for more than eight minutes, his life will never be the same after the tazing as he struggles to piece back together his damaged.

But it’s not just individuals who risk personal when cannabis is involved. Such was the case in February, 2012 when the “smell of marijuana” prompted Grayling, Michigan police Officer Alan Somero to notify Child Protective Services of a need to remove a child from the home. When 32- year-old William Reddieattempted to stop the kidnapping, Crawford County Deputy John Klepadlo shot and killed him right in front of his three-year- old son. Though a tazer would have been sufficient, the court ruled that the officer acted according to protocol and will not face any charges.


rally_against.jpg

Photo Credit: Fibonacci Blue


Parents Risk Losing Their Children for Marijuana Use
The cannabis industry has created thousands of jobs and needs employees to fill the positions. But parents in legal states face an overwhelming quandary: to become a part of the business and risk a visit from CPS or to avoid the business – and the product – and miss out on all of the benefits that come along with it.

Recounting a visit from local police and CPS workers, December Kennedy, notes that even compliant, legal cannabis users still face scrutiny in regards to their parenting skills when cannabis use is admitted. After being told by police that her cannabis use and cultivation was completely within the law, CPS workers still claimed concern over drug use in the home and launched an investigation that lasted many years and put her family through an emotional wringer. Though she was fortunate enough to maintain custody of her children, others were not so lucky.

In September, 2014, young Angel Lane was taken from her parents due to their admitted marijuana use and placed in foster care. When the young foster mother was unable to get Angel to stop crying, she grabbed her by the neck with both hands and shook her vigorously. Angel was dropped to the ground, unresponsive, and taken to the Children’s Hospital the next day where she was pronounced dead due to "blunt force head injuries". This case highlights not only the misguided notion that cannabis users are abusive but that the foster system – and indeed Child Protective Services – has a lot to learn in terms of what constitutes a “safe environment”.

Legal Cannabis Businesses Still Risk Federal Intervention
Though the DEA is prohibited from interfering with legal cannabis businesses, vague laws and conflicting information are keeping legal businesses vulnerable to federal intervention, anyway. This is especially true in California where flaws in the existing medical marijuana laws leave too much room for interpretation. Though Governor, Jerry Brown, has made a move to rectify discrepancies within the law, these efforts will not go into effect until 2018. In the meantime, cannabis businesses still face issues like property forfeiture and criminal charges due to cannabis’ federally-illegal status. This, in addition to higher taxes for cannabis businesses, means that those in the industry will continue to be discriminated against due to marijuana’s misplaced federal status.

Cannabis reform is a big deal. Transitioning from a “just say no” mentality to a more permissive one takes time, especially when it comes to convincing the masses. But when cannabis is used to justify wrongful police conduct, it frames cannabis as the dangerous thing; as something that must not be promoted.

As long as the whole “weed leads to crime” story is reiterated, it will be difficult to pursue positive change. It’s time we stop using cannabis as an excuse for poor behavior and focus on the individual instead.
 

roots69

Support BGOL
Registered
Don't Listen to the FDA -- CBD Products Are Still A Great (Legal) Option
remote.axd
News
CBD hemp products range from tinctures to concentrates, capsules, vaporizer oils and more. They’ve been known to have incredible medical benefits for a variety of people, plus they won’t make you high and can actually counter the psychoactivity of THC. And no, the FDA has not banned them as many suspect.

Recently, a slew of articles flooded the internet claiming that the FDA had banned CBD and hemp oil supplements. Though headlines like “HEALTH FREEDOM ALERT: The FDA just Outlawed CBDs and Hemp Oil Extracts by Claiming that all Plant Molecules Now Belong Exclusively to Big Pharma” is great for clicks and shares, the unfortunate nature of internet surfers means that most people never made it past the headline before chiming in about their disapproval. Hence, false information about the legality of CBD supplements has spread like wildfire.

But we can assure you that your CBD oils are still legal in America -- distributors just have to be more careful about their labeling. When product manufacturers and distributors purport that their product can work as effectively as prescription drugs to treat illnesses like epilepsy and schizophrenia, the FDA is compelled to remind them that their claims (which have not been scientifically-proven) have no place on a product label or advertising campaign.

In early February, the FDA did just that when they sent letters to eight CBD companies describing violations in product labeling and advertising (just like they did a year earlier, when they issued six violation letters). According to the letters (which can be read in full on the FDA website), these companies were in violation of the Food, Drug and Cosmetic Act because they were being marketed as drugs which are intended to cure, mitigate, treat or prevent disease.

The letters go on to describe problems regarding CBD marketed as a dietary supplement due to its potential to be used as a new drug. Because of the extensive research on CBD – and public knowledge about therapeutic qualities of CBD – it is inaccurate to market CBD as a mere dietary supplement (this isn’t ginger root here, people).

So what does this mean for consumers? Well, it certainly does not mean you won’t be able to buy CBD supplements online anymore, or that you will be involved with shady operations if you do. It just means that the FDA is trying real hard to have your back when it comes to acceptable advertising methods.

Way back then drugs could be purchased with or without a prescription, many pharmaceutical companies would advertise their drugs to consumers by boasting over-inflated benefits while downplaying (or not mentioning at all) any potential negatives. Many companies would also keep a drug’s ingredients to themselves, never once accounting for potential allergens or other dangerous drug concoctions.

Since then, the FDA has adopted a number of regulations surrounding what is and isn’t appropriate to advertise to consumers. In 1938 (after more than 100 people died from taking a non-regulated drug), the Food, Drug and Cosmetic Act passed requiring that all drugs be proven safe to consume and requiring that drugs come with labels containing a list of ingredients.

Fast forward 50 years to the dawn of direct-to-consumer advertising. For the first time in years, consumers were being educated about prescription drugs without even leaving their couch as magazine and television ads became the norm. To slow the chances of public misinformation about drugs, the FDA began regulating marketers the same as physicians, requiring that all pertinent information about a drug be presented in every advertisement.

In keeping with the regulatory drug system, CBD products cannot be marketed as drugs without FDA approval, and they cannot be sold as supplements due to the promising nature of CBD as a medicine.

So where does that leave us? With consumers acting as voluntary Guinea Pigs while the FDA paves way for more conclusive CBD research. In the meantime, it is legal to purchase CBD products anywhere in the U.S. – you can even have them legally shipped to your door – but advertisers and distributors need to be careful with their marketing strategies along the way.

If you think you’d like to try CBD hemp products like oils, tinctures, capsules, etc. for your health, check out our friends at Hemp Life Today. They offer quality products, great pricing and again -- it’s 100% legal and can be shipped anywhere in the country.
 

roots69

Support BGOL
Registered
This shouldnt surprise anyone!! The media luv to play this good cop/ bad cop game on the people of this country!! Just remember when these politicians/news reporters, claim they hate something/someone with a passion!! Look hard and deep into the background and you will find what they claim too hate, is really what they really luv!!

Fox News and Cannabis: Why Does the Network Oppose Marijuana?


remote.axd
News
The fact that Fox News is anti-marijuana isn’t really news, which one can also say about the channel’s content in general. The right-leaning opinion provider has found great success by scaring mostly older Americans about everything from immigrants to minorities and all the way down to centrist Democratic presidents, so why wouldn’t they add the devil’s lettuce to the list? It worked in the 1950s, which is when most of their current viewership was born.

Fox News has indeed been ramping up their cannabis coverage as of late – especially with more and more states passing progressive marijuana reform laws. And while the news outlet has the right to free speech, oftentimes their portrayal of cannabis fails to provide accurate information or scientific evidence backing up claims. Let’s take a closer look into this interesting relationship between Fox News and cannabis.

Recent Fox News Cannabis Coverage
In the most recent clip to go viral, Polk County’s Sheriff Grady Judd joins the hosts of Fox and Friends to talk about the dangers of marijuana, prompted by the arrest of a local Florida middle schooler who handed out THC-infused gummies to other students in gym class. Five students went to the hospital with stomach pain, nausea and dizziness. All recovered quickly and were released.

It goes without saying that no states with legal cannabis reform allow 12 year olds to purchase gummies and hand them out to other underage children. Some states do allow minors to receive medical marijuana, however, all cannabis use must be monitored by the child’s guardian. Ultimately, 12 year olds should not be consuming marijuana unless there is a real medical need and they should never have unsupervised access to cannabis.


fox-news.png

Fox News tends to dwell and speculate on negative cannabis happenings. photo credit

While the media may make it seem like children are running rampant with gummies and other cannabis-infused edibles, it’s important to note that this is an extremely rare occurrence. The child who handed out the gummies should be expelled from school and punished by his parents. The story should have ended in the local paper.

Fox News has a tendency to blow any negative cannabis news out of proportion, though, prompting Fox and Friends to invite Sheriff Judd on the show to dig deeper into the subject of marijuana. The cavalcade of ignorance begins right after this adult gloats about a child who made a dumb mistake facing 7 felonies, which are charges normally reserved for murder or other serious crimes.

“No one talks about this — THC [sic] is addicting,” Co-host Brian Kilmeade opens. “I know so many people, they say they were told one thing and they end up getting addicted to it. That is an addicting substance. There is a price to pay for pot.” Sheriff Judd, a stand in for every D.A.R.E officer who visited your school in the early 90’s, strongly agreed. Surprisingly, more credible guests like medical professionals or other experts in the field of cannabis research and policy, were not invited at all.

Does Any Factual Evidence Support Fox News’ Claims?
Most studies show that cannabis has little to no addictive properties. Fewer than 1 in 10 marijuana consumers do report having trouble quitting, but that’s far below the 15% of alcohol or cocaine users reporting addiction, or the 25% of heroin users. Only 6% of cigarette smokers are able to quit in any given year and over half of all smokers try. Furthermore, no honest person would ever compare the addictiveness or health dangers of marijuana to a more harmful drug like meth – but Sheriff Judd does.

“And still today we have a meth problem across this state and country” Judd announces “...and they use the marijuana and the meth and they go out and kill themselves or overdose or kill someone else.”
Sheriff Judd is right that becoming violent or overdosing on meth is a real danger when abusing the drug. On the other hand, overdosing on marijuana, according to the Centers for Disease Control, is medically impossible. Then there’s the fact that there is no link between marijuana use and aggression, and that violent crime rates have decreased in states that have legalized. Of course, not one of the three hosts brought these facts up, and actually agreed with Sheriff Judd’s next crazy statement, which is that marijuana “...is ruining families and killing people every day across the United States and we stand here in denial thinking it is not a gateway drug.”


sheriff-judd.jpg

Sheriff Judd (left) might want to do some research on cannabis before his next television appearance. photo credit

As stated above, marijuana is non-lethal, and the idea of marijuana as a “gateway drug” is a little shifty. The facts are that some people do move on to harder drugs after starting with marijuana, just as they do with alcohol or cigarettes. But correlation is not causation and many people believe the misguided War on Drugs is a major reason that people begin using more dangerous substances in the first place. If there is a “gateway drug” that is killing Americans across the country and ruining families, it’s prescription opioids, which are pretty clearly a gateway to heroin.

Disconnect Between Cannabis and Prohibitionists
One of the biggest roadblocks to cannabis progress is the overall disconnect between prohibitionists and the facts surrounding cannabis. Many people against marijuana simply do not understand the plant, which is clearly evidenced in Sheriff Judd’s Fox and Friends appearance.

Perhaps the strangest accusation the Sheriff makes is “If it’s legitimate medicine, why are they marketing it to kids and calling it Green Hornet?”
Let’s break that one down. First off, the binary of marijuana consumption is not “medicine” and “child’s candy.” Marijuana can be consumed for medicine, or by responsible adults for recreation, which is who they are marketed towards and purchased by with multiple ID checks. No cannabis producer is basing their income around children’s allowances.

Second, why does Judd think “Green Hornet” is a pull for children? Most child psychologists can tell you that kids are not enormous fans of bugs that sting them mercilessly. The only other option is that Sheriff Judd thinks that kids are enormous fans of a 2008 Seth Rogan superhero movie which, with the recent success of Marvel’s superhero multiverse, might be a bit tough to back up.

Other Fox News Cannabis Coverage
Sheriff Judd’s appearance on Fox and Friends isn’t even close to being the only Fox News piece pushing false cannabis views. You don’t need to dig far into the archives to find hosts spreading long-debunked rumors about cannabis.

During a recent segment on Tucker Carlson, the controversial host took time to share his thoughts on Canada’s national legalization of cannabis. While one can take many angles on why Canada legalized, such as the will of the people, economic benefits, criminal justice reform, or medicinal relief, Tucker Carlson went with the weirdly paranoid view that the Canadian government is distributing marijuana to keep people passive and compliant.


canadian-cannabis.jpg

Did Canada legalize cannabis to make their citizens passive? No evidence backs this claim. photo credit

Tucker goes further to spread the false idea that marijuana makes people less likely to go out and accomplish their goals. The stereotype of lazy stoners sitting at home can be pretty much debunked by any number of athletes, businessmen or celebrities who use marijuana and still attain success, but that’s beside the point.

In another clip, Steve Doocy has a former drug czar on to talk about Colorado’s legalization failures, including that emergency room admissions and homelessness are increasing. Given that, again, it’s essentially impossible to overdose on marijuana, one wonders how much this drug czar actually knows about drugs. Especially since the drug that is currently leading people into homelessness and ER visits is clearly prescription opioids.

According to a recent Fox News poll, 59% of their own viewers believe marijuana should be legalized, which raises the question of who exactly their anti-marijuana hysteria is being directed towards. Since they are running a business, one can expect the number of cannabis fear-mongering segments to decrease as public support of marijuana continues to rise. Who knows? Maybe someday Fox News may have to start reporting some actual marijuana facts in their segments. Then where will Sheriff Judd go?
 

roots69

Support BGOL
Registered
How to Flush Marijuana Out of Your System


remote.axd
420 Culture
Marijuana can be good for a lot of things, but helping you pass a drug test isn’t one of them. Many people ask us how to flush marijuana out of your system. Well, it starts with a bit of knowledge and a marijuana detox.

How can I clean weed out of my system?
User from San Jose, CA
There are many reasons why people want to ‘flush’ their system of marijuana. The most common situation is a drug test for employment purposes.

Workplace drug tests typically involve urinalysis (testing your pee) for metabolites. Metabolites are a byproduct of a substance after it has been processed by your body. When you consume marijuana, the tetrahydrocannabinol (THC) levels in your blood stream will immediately increase. As your body cleanses the THC out of your blood stream, metabolites are left behind.

Note that THC, the cannabinoid known for its psychoactive effects, is responsible for getting you “high.” Having said this, both THC and the non-psychoactive metabolite, THC-COOH, will remain in your body’s fat tissue for varying lengths of time depending on a variety of factors.

To figure out if you are ‘clean’ for a drug test and how to get weed out of your system, you need to be able to determine the following:

  • The amount of THC and its metabolites in your system
  • The type of test you’ll be required to take
  • The testing levels for your drug screen


How Much THC is in My Body?
There are a handful of factors that will help you determine how much THC and THC-COOH are in your body after any length of time, post-consumption.

  • How often you consume:
    When determining how much THC is in your system, you must take the frequency of consumption into consideration, first and foremost. Do you smoke once a month, once a week, everyday? When you do smoke, are you only taking one hit or enjoying an entire joint (or two)? Obviously, the more frequently you use (and the actual amount you consume), the more THC and THC-COOH will accrue in the fatty tissue throughout your body.

  • Total body fat:
    As we just mentioned, THC and THC-COOH store itself in fat cells, no matter how often or little you use. As a result, the more body fat you have, the more THC and its metabolites will be inevitably stored.

  • Metabolism & overall health:
    It makes sense that the healthier you are, the better off you’ll be (in all aspects in life). When it comes to THC and its metabolites, they have less of a chance of storing themselves in your body fat, if there isn’t a lot of body fat in the first place! Having said this, everyone has varying metabolisms that break down THC at different rates. Although exercise can potentially push THC back into your blood stream at a faster rate, this doesn’t mean that you should throw away healthy habits into the wind. Simply maintain a healthy lifestyle and don’t work out too much before a test.

  • What you’re consuming:
    Depending on what you consume (flower vs. concentrates) and even the quality of what you consume (top shelf flower vs. schwag) will greatly effect how much THC and THC-COOH are released into your body.
How Long Does THC Stay in My Body?
Typically speaking, psychoactive THC cannabinoids can be found in the system for 1-2 days after consumption for very infrequent users, while those who consume everyday can expect it to remain in your body for longer.

The half-life of THC metabolites is 7 days. Meaning every 7 days, the amount in your body will decrease by 50%.
With this number in mind, most people can assume their body will be clean of THC metabolites within 3-4 weeks -- more or less depending on frequency, body weight and amount consumed.

THC is fat soluble and as a result, it gets stored in your fatty lipid tissue. Because of this, your fat cells will secrete THC metabolites into your bloodstream at a constant rate. As a result, many different cleansing techniques are ineffective, as your fat cells will continue to release THC metabolites into your system over time.



Types of Drug Tests
Similar to the variety of factors that can define how much THC is in your system, there are a number of ways your (future) employer can test you. They include urine, blood and hair.

  • Urinalysis (UA) is the most common type of drug test. It’s used in many businesses because it’s less expensive than other modes of testing and is fairly accurate. Note that urine drug tests detect THC-COOH (metabolized THC), versus THC itself.
  • Blood Test identifies THC in your bloodstream. Unlike urinalysis, a blood test will show impairment. For those who rarely consume, THC might not be measurable several hours afterwards, however for those who use everyday, THC could remain in your bloodstream for a much longer period of time.
  • Hair Test is a less common form of testing, however does take place in some work places. Because it measures THC-COOH remainders in the hair follicle over the past several months, it’s often difficult to get around this one. Don't worry though, you do have options available which we address below.
How Do I Pass a Drug Test?
The best way to pass any drug test is to not consume at all. Having said that, don’t worry if it’s “too late.” There are ways to mask THC in your system, so do your best to follow our tips below – and think about a backup plan in case you might need the extra help.

Typically, random drug tests are delivered with short notice, which means you won't have as much time as you'd like to prepare for a drug test. It may sound silly, but as soon as you know that you're going to have to take a marijuana drug test, stop consuming cannabis in any form! Whether you're a heavy user or casual user, do yourself a favor and stop all cannabis consumption.

Note that the longer you have before your drug test, the better your chances will be of actually passing.
It's important to realize that marijuana cannot be flushed out of your system using cranberry juice, niacin, vinegar, large amounts of water, creatine pills, ginger root tea, surejell, bleach, etc. In fact, most of these products continue to remain top of mind due to incorrect drug testing myths but they won't actually help you pass modern drug testing techniques.

Instead, here are three ways to pass a drug test:

  1. Detox, naturally.
    Forget detox pills, detox programs or detox kits! A normal healthy, in shape person can rid their body of toxins in 4-6 weeks with a great diet, water and plenty of exercise. Obviously, those with a fast metabolism, lower water retention and overall low BMI will be able to do this faster.

  2. Detox in 3-6 days, with detoxification products.
    If you're on a tight time frame, then you probably just received notice about a marijuana drug test and need answers now. Thankfully, there are many detoxification products available (which we cover below) to help your body rid itself of harmful toxins in approximately a week. They're successful by leveraging herbal supplements to cleanse your body. Be sure to use a home drug test kit after to ensure you're fully clean of THC.

  3. Detox in 24 hours, with same day cleansers.
    If you're truly panicking a day or two before your test, it might be worth your while to try a same day cleanser from a company like TestClear.com (available online). Such products temporarily target the urinary tract to flush metabolites to give you a brief period for which to give a clean urine sample, meaning you could technically pass a drug test in 24 hours.
Tips to Pass a Urine Drug Test:
As we mentioned, piss tests are more common than a hair drug test. To pass a marijuana urine test, also known as a urinalysis test, you don’t need to be 100% free of THC metabolites. Rather, you need to have levels below the threshold for the test. Typically the threshold is 50 ng/mL, which is higher than you may think. As long as you register under this value, your test result will be negative.

The primary method of passing a urine drug test is to dilute your urine enough where it will be below the 50 ng/mL threshold. It’s a simple as that, but with a hitch. Drug testing labs are on the lookout for diluted urine samples. So in order to be an effective technique, you need not only dilute your urine, but to mask the fact that your urine is diluted.

Water
There is no reason to start drinking excessive amounts of water weeks or days before your test. It’s a waste of time as it only temporarily dilutes your urine. Your best bet is to drink 2-3 liters throughout the day before your test, and then around 1-2 liters several hours before your test. Don’t drink too much water though, as it can be dangerous. Start with 2 liters max and be sure to know your limits.

After drinking this much water, your pee will be colorless and have low levels of creatinine. These are both red flags for any testing lab to indicate diluted urine, so there are some additional steps you need to take.

Vitamin B
You’ll need to make your pee yellow, and the best way to do this is by using vitamin B. Vitamin B-2 or B-12 seem to be the most effective for this purpose, so stop by your local drug store and take 50-100mg several hours before your test.

Creatinine
Creatinine is a chemical waste product produced by muscle metabolism. Creatinine is naturally occurring in the human body and is one method labs use to determine if your urine is diluted. It has a half-life of three hours, so no reason to start taking it more than a day or so before your test.

You can buy creatine supplements from almost any health food store. Creatine then gets broken down into creatinine by your body and is flushed out in your urine. You should take an above-average dose several hours before your test.

Alternative Ways to Pass Your Urine Test
Detox Drinks


XXtra Clean Cleansing Drink
There are many so called ‘detox drinks’ on the market. In reality, these detox drink use the same technique we have addressed above, which is dilution. They also contain creatine as well as vitamin B to mask the fact your urine is diluted. While they are more expensive than buying creatine and vitamin B a la carte, detox drinks can make sense for a convenience factor, as well as ensuring you are ingesting the correct amounts of vitamin B and creatine before your test.

If you're looking to order a detox drink online, TestClear.com is a reputable vendor that offers a variety of detox products. They also have a handy directory of drug testing articles to help you pick the best product to beat your test!


Avoid Exercise
Exercise will break down your fat cells, which will release any THC metabolites into your system. As a result, you should not exercise for at least 24 hours before your test. Failing to do so can cause a spike in THC metabolite levels in the blood.

If you have a couple weeks before your test, it does make sense to exercise to break down those fat cells and release the THC metabolites, but make sure you stop a couple days before your test.

Don’t Give the Beginning or End of Your Urine Stream
When peeing into a cup, the first and last parts of your urine stream contains the highest amount of metabolites. As a result, you want to provide some urine from the ‘middle’ of your pee stream. Simply start urinating in the toilet, stop and provide a sample in the cup, and then finish as normal. This is a very important step, so don’t forget to do it! Also, be aware that early morning urine will typically contain the highest level of toxic metabolites, so never give morning urine.

Synthetic Urine
If you are a heavy consumer or have a high fat level in your body, then dilution may not be an effective method for beating your test. In this case, another option is substitution with synthetic or powdered urine. In other words, substituting your urine with either fake urine, which is commercially available, or with the real urine of somebody who is a non-user.


The advantage of substitution over other techniques is that you know the sample you provide to the lab will be clean. The disadvantage is you need to conceal the clean urine when entering the testing facility, and then add it to your sample cup during the testing process without detection.

Now if you’re doing a pre-employment drug screen, they almost never watch you when you pee in the cup. They usually will provide you with a private bathroom, during which you can pee in the toilet (sometimes they listen outside the door to determine if you actually urinated), then pour the synthetic/clean urine into the sample cup.

Be aware that labs take the temperature of your urine right after you submit your sample, so you’ll need to ensure that it registers close to normal body temperature otherwise it can be flagged. Usually you can microwave the urine to a temp of 100 fahrenheit, then rubber band a hand warmer around the sample to keep it warm until testing time.

Buy Powdered Urine Here

Tips to Pass a Hair Folicle Test:
Hair follicle testing is another form of detecting cannabis or other drugs within a person’s system. Generally known as the most rigorous and accurate of tests, hair follicle drug tests are much more challenging to cheat than a urine analysis. Additionally, the purpose of hair testing differs from urine tests. While urine tests seek to identify a single use of a drug, hair tests aim to identify chronic use over time.

Hair tests may be performed on head or body hairs and can analyze previous use for much longer than urine tests. Head hairs can pick up cannabis for up to 90 days, while body hairs can go back up to a full year. If you shave your body from head to toe, a hair test is impossible to conduct, however, it may seem a bit suspicious to the person administering the test.

Even though hair tests are more difficult to fool than urine tests, there are still ways to beat the system. Companies like TestClear offer many shampoos and at-home testing kits for those looking to pass a hair test. Using these products don’t guarantee a negative test result, but many people have had success so it's definitely worth a try.



How to Detox, Naturally:
Think cranberry juice, niacin, Golden Seal or vinegar will help you detox completely? Not a chance. The body is a very complicated system, so good habits and time will ultimately help lower your toxin levels, increase your metabolism and overall health. If you're curious if you'll pass your test or not, grab a home test kit to make sure you get the drug test result that you want!

Here are a few great tips:
  1. Simply don't consume marijuana. As we discussed earlier, this is the easiest way to keep THC out of your system. No matter how much you love weed, it's a habit you'll have to break to become completely detoxified.
  2. Exercise. Although it takes a lot of motivation to make it to the gym or go on a run, it's one of your best bets to rid your body of any toxins and ultimately pass a drug test. Those with higher levels of body fat or BMI will store THC in their fat cells for longer, making it more difficult to detox. As a result, combine strength conditioning with cardio (swimming, running, biking, etc.).
  3. Drink water. Although many people will tell you drink a lot of water, it's important not to over do it. Definitely drink enough to stay hydrated (6-8 8oz glasses a day) and help flush your body.
  4. Avoid bad food and red meat. Although pizza, fries, ice cream and other junk food sound and taste delicious, they are extremely high in sodium and sugar, resulting in an increase in water retention in your body and a slower metabolism. When trying to rid your body of marijuana, stick to healthy, clean foods like fruits, vegetables and lean meat selections.
  5. Drink tea and lemon juice. Needless to say, tea is a natural detoxing agent. From green tea to jasmine, to black tea to white tea, be sure to drink a few cups a day to get incredible amounts of antioxidants, electrolytes and even vitamin c. All of these varieties will increase your metabolism and help you detox your body from marijuana, naturally.
  6. Eat vegetables and fiber.
Final Thoughts
Being subjected to a drug test after cannabis consumption (especially if you're a daily smoker) is a very stressful experience that can cause anxiety and worse. Need to get weed out of your system fast? Remember that by using these tips you can drastically improve your chances of passing. We hear from people all the time thanking us for our tips, and we’ve successfully used them ourselves at one point or another.
 

roots69

Support BGOL
Registered
How to Hide Your High


remote.axd
420 Culture
Okay, so you're high and afraid everyone is on to you. The good news is that it's probably not true. Nevertheless, if you need to mask your high, there are a few things you need to remember: you smell like weed, your eyes are barely opened and you've been laughing at the spider in the corner for over a minute. Let's take care of that!

Stop smelling like weed
There's a lot you can do to remove, or at least hide, the odor of burnt marijuana. To rid clothing of the smell, for example, you can use cologne, perfume, Fabreeze or spray-on deodorant. Don't overdo it, though. If you only use these products after you've smoked cannabis, people will start to associate the smell of Ax Body Spray with you being stoned :)
Your hands will also likely reek of weed, as will your breath, so remember to use lotions and mintswhen you're on the go and brush your teeth whenever possible to freshen your breath and help avoid staining.

If you need to hide the smell of weed in the air, consider using fans, candles or air purifiers. You can also make a "doob tube" prior to your smoke session by stuffing a toilet paper or cardboard tube with dryer sheets. To use it, just blow the smoke through the tube to make it smell like laundry day instead of 4:20.

Open your eyes
Using cannabis can cause inner eye pressure to drop, resulting in an expansion of blood vessels throughout the eye (or red/bloodshot eyes). Though this is great for glaucoma sufferers, it can be a pretty big nuisance for those of us who just want to get high without getting hassled. Fortunately, red eyes can quickly be tamed with a little Visine or other whitening eye drops (which contain special chemicals to reduce blood vessel size). Be warned, though, over use of these products can cause you to develop a tolerance and may even lead to rebound hyperemia, or chronic red-eye.

Now that the red is out, stop squinting! This happens because marijuana dilates your pupils making your eyes more sensitive to light, but can be a dead giveaway that you've been smoking some herb, too. One option is to wear sunglasses on your next adventure, but that, too, can be an obvious tell. The best thing you can do to stop squinting after smoking marijuana is to practice not squinting (alone) so that you'll be prepared your next timeout.

Chill out, man
You can take all the right steps to remove the appearance of being stoned, but if you're still acting high, it could all be for nothing. Here are some of the most common things you could do that might give away the fact that you’re high and what you might do to help.

Laughing uncontrollably
Being stoned is a lot like having a little comedian in your head commenting on everything around you. And, even though this comic is probably hilarious, the rest of us who aren't in on the joke might get a little suspicious of your sunny take on life. If you're high and in public, try to keep your giggles to a minimum.

Forgetting things easily
The human brain craves efficiency and the storage of memories is no different. We can only remember things that our hippocampus deems important in order to facilitate a more streamline thinking process. When THC interacts with the hippocampus, it essentially hijacks the memory-making process making it much more likely that you will forget your thought mid-sentence. You can lessen the likelihood of forgetting things when you're high by practicing memory games and visualizing your thought process.

Becoming extremely philosophical
Marijuana use causes divergent thinking, or the ability to make far-reaching connections out of seemingly unrelated concepts. Though this is no doubt the reason so many artists and creative thinkers credit cannabis for their work, it also a common sign of a freshly-baked brain. If you’re trying to hide your high, consider keeping your deep thoughts in a journal instead of on your lips.

Excessive eating
Not only does food taste better when we’re stoned, but the pain of a full tummy seems to elude us, too. Food cravings are powerful when high and can be a sure sign of a recent smoke session, too. Avoid overeating when you’re high by consuming a small snack prior to smoking then drink plenty of water to stave off cravings for the next few hours.

Couch lock
Strong indica strains have a deep effect on the body, making the idea of exercise alone seem exhausting. But if you want the people around you to believe you’re not stoned, you’ll probably have to do it anyway. It doesn’t have to be much, must a little movement to get your blood pumping. Plus, you’ll feel so much better after you get off of the couch for a while, I swear.

Being high is awesome, but sometimes it's better to keep a high under wraps. A last-minute trip to the bank or visit with the in-laws, for example, might best be handled under the guise of a straight head. Fortunately, there are a few things you can do to reduce the appearance of being stoned. Use these tips to hide your high so that you get through your next encounter unscathed.
 

roots69

Support BGOL
Registered



How to Grow Cannabis in 10 Easy Steps

Table of Contents

Introduction: How to Get to Harvest in 10 Steps

Step 1: Choose Your Place to Grow

Step 2: Choose Your Light

Step 3: Choose Your Growing Medium

Step 4: Get Cannabis-Friendly Nutrients

Step 5: Where to Get Cannabis Plants

Step 6: Germinate Your Seeds / Start Your Clones

Step 7: Vegetative Stage – Only Stems and Leaves

Step 8: Flowering Stage – Buds Start Growing!

Step 9: Harvest Your Cannabis

Step 10: Dry & Cure Your Buds Like a Professional

[paste:font size="5"]
Cannabis legalization is spreading like wildfire across the US, Canada and in many other countries around the world. Many people are finally allowed to legallygrow their own supply of cannabis!

Are you ready to start growing?

Growing cannabis can seem like it’s complicated, but often it only seems that way because you haven’t been given the right information. A lot of people unintentionally make growing harder than it needs to be, but that ends now!

This cannabis growing guide will help you discover the best way to grow cannabis, for your unique situation.

Find a grow style for…

  • Your grow space
  • Your budget
  • Your desired yields
Growing cannabis plants is actually pretty straightforward, and almost anyone with a few extra minutes a day and a spare closet or a garden in the backyard can grow their own professional-quality buds at home.

What does a cannabis plant need to thrive?

In order to thrive and grow, every cannabis plant needs:

  1. Light – whether you’re using sunlight or grow lights, you must understand the light needs of a cannabis plant to get the best bud quality & yields.
  2. Growing Medium – the stuff your plants grow in; soil isn’t your only choice!
  3. Air – a well-ventilated space with good air exchange and a slight breeze is best.
  4. Temperature – A good rule of thumb for cannabis plants is if it feels too hot for you, it’s probably too hot for your plants. Just like humans, cannabis plants can die if exposed to extreme temps.
  5. Nutrients – you can buy pre-formulated nutrients that you just add to your water, or you can compost your own super soil so that it already includes all the nutrients you need.
  6. Water – like all plants and living creatures, cannabis needs water to survive and grow. Is my tap water “good enough” for growing cannabis?
When growing cannabis indoors or outdoors, you will need to ensure that it gets the proper amount of these 6 resources.



How long does it take to grow cannabis?

If you planted a cannabis seed today, when is the soonest you could be actually smoking your harvest? Probably about 9 weeks with a quick-finishing autoflowering strain.

Indoor grows tend to be shorter than outdoor grows since you have more control over when the plant starts budding. Auto-flowering grows also tend to be very short. But with shorter grows, you also tend to get smaller yields. Certain strains and certain outdoor grows can take up to 7 months or more.

On average, I’d say it takes a grower about 3 – 5 months to grow, harvest and cure their own buds.

Learn more about how long it takes to grow cannabis



Don’t Make the 3 Most Common Cannabis Growing Mistakes!

  1. One of the most common mistakes by new cannabis growers is conducting spur-of-the-moment experiments that hurt or possibly even kill their plants. Always take a second to google your idea before you try it. Luckily when it comes to growing cannabis, there is a good chance that someone has tried it already!
  2. The next most common problem new growers have is the tendency to skip crucial steps like understanding light schedules, or why root pH levels are important for reducing nutrient deficiencies. While you can get lucky and succeed at growing weed without taking these steps, you are a lot more likely to end up with plants that are sickly or don’t produce well. Make sure you follow all the steps listed in this guide – you deserve to harvest your own top-quality bud!
  3. Don’t re-invent the wheel! You can benefit from the mistakes of others by learning how not to make the same mistakes. Don’t be afraid to look something up or ask a fellow grower!




Step 1: Choose Your Location





[paste:font size="5"]Indoors

indoor grow journals to get an idea of how much you can expect to harvest in different types of indoor setups. My lastest 315W LEC grow yielded over a pound (497g) of dried and cured cannabis.

You have more control over everything in an indoor growing environment, which means that indoor growers can consistently produce dank buds. However, this dank weed-growing power comes with more responsibility. As an indoor grower, your plants are 100% reliant on you your care if they are to survive. If you don’t provide everything your plants need, they will die.

What space works best?

You can grow cannabis almost anywhere that has easy access to water and fresh air…

  • a spare room
  • a closet
  • garage
  • grow tent
  • extra bathroom
  • even the inside of a computer case!
    (though I recommend a Space Bucket instead
When thinking about where to grow indoors, you should also consider the temperature (also referred to as ‘temps’) of your grow space and remember your temps will rise once you have your grow lights running!.

thermometer-hot.jpg
Young growing cannabis plants grow fastest when temps a bit warmer, in the 70-85°F (20-30°C) range.

When plants are a bit older, in the budding/flowering stage, it’s best to keep temps slightly cooler, around 65-80°F (18-26°C) to produce buds with the best color, trichome production and smell.

Because temps are so important, it’s best to be able to have some amount of control over the temperature of your grow area. When growing indoors, your grow lights will give off heat. Generally, the more powerful your lights, the more heat they give off.

If you want to install a lot of bright lights in a small space, you will likely have to install an air conditioner in addition to your exhaust system to make sure you keep your temps in the right range.

If you’re growing just a few plants in a grow tent or box, usually you can install a fan to pull hot air away from the hot lights and out a window to keep things cool enough.

Some lights tend to cause more heat problems than others, and we’ll help you find the right lights for your space in Step 2.

Outdoor Growing

Growing outdoors is cheaper to get started since you don’t have to get grow lights or create an indoor grow area, though you will have to worry about privacy/stealth, possible pollination, people stealing your plants, bugs, deer and other unexpected outdoor visitors.

However, if you pick the right strain and live in a good environment, it can be much cheaper to grow outdoors, since you don’t have to provide everything for your plants. The sun will do a lot of the most cost-heavy work for you by providing a free grow light.

Of course, when you’re growing outside, it’s not always possible to control the environment perfectly. If it’s dry, you will need to water your plants. If it’s too rainy, you need to protect your plants from getting overwatered.

When it comes to temperatures, a good rule of thumb about cannabis plants is if it’s too hot for you, it’s probably too hot for your plants. And just like humans, cannabis plants can die if exposed to freezing or too-hot temps.

So if you know it’s going to be extremely hot or cold where you live, you may need to take extra steps to protect your plants from the elements, like setting up a small greenhouse.

Learn more about the difference between growing cannabis indoors vs outdoors



[paste:font size="5"]The Sun





Compact Fluorescent Light Bulbs (CFLs) & household LEDs are what people commonly use to light up their homes. They aren’t really made for growing plants, but can be a good way to get your feet wet in the growing world without a significant investment. They lack the power of dedicated grow lights, but can get the job done. CFLs and home LEDs like these are dirt cheap, and you can usually buy them from any big-box store without arousing suspicion. In fact, growing with CFLs is what I did for my first grow and I got them from a local Home Depot. I imagine that my first grow would’ve ended the same (or even better) had I used small household LEDs instead of CFLs, though they weren’t available back then. Learn more about growing with CFLs.





These lights are traditionally made for seedlings and plants that need lower light intensity than cannabis. If you do get other fluorescent lighting, I recommend sticking with a High-Output T5 light since they are the brightest option in this group. Even so, I generally recommend changing to stronger grow lights for the cannabis flowering stage unless you do major plant training (to keep plants very short) since these lights have a short light brightness range and must be kept very close to the tops of your plants. Learn more about growing cannabis with fluorescent lighting.







LEC (Light Emitting Ceramic) is a brand name for a type of light (CMH – Ceramic Metal Halide) that has existed for quite a while. This type of light has come back into vogue after some rebranding, partly because it has some very positive traits for growing cannabis compared to HPS lighting. For one, LECs have a more natural color that makes it easier to care for and diagnose plant problems. Plus, it’s a lot better for security to have a light that doesn’t scream “WEED GROWING HERE!” like the unearthly yellow hue of an HPS. They produce significant levels of UV light, which can possibly increase trichome production. Additionally, they don’t seem to emit EMI (Electro Magnetic Interference) as much as their noisy HPS cousins which means you’re less likely to have a HAM radio enthusiast accidentally tracking down your grow. The plants grew surprisingly fast under a 315 LEC and we were impressed by the yields we achieved on our first grow.





LEDs are much more powerful than CFLs or any other fluorescent lighting. They are top-tier grow lights on par with HID lighting (HPS, LEC) when it comes to how much bud they can produce. They’re visually attractive and tend to be more appealing to growers because they’re not as ‘old-fashioned’ (though they tend to cost more). In fact, LEDs are the only grow lights that have seen major technological research and development in the past 10 years.

LED grow lights work great for growing cannabis and some companies have been refining their models for years (the combination of parts is almost like a company’s recipe). Each LED model is different and needs to be kept a different distance away from your plants. It can sometimes be hard to find any “standard” advice about growing with LEDs, yet these days there are quite a few brands which are well-tested and trusted by cannabis growers and these brands tend to have good support for questions. When in doubt, it’s always a good idea to just ask the manufacturer about how far away the lights should be kept, as that’s where new growers are most likely to mess up.







MH/HPS grow lights (like the light pictured here) are a type of “HID” light like LECs. A combination of MH/HPS is what most commercial growers use when growing cannabis indoors. They are surprisingly cheap to buy and set up, especially considering how incredibly powerful they are.

HID lights work very well for growing cannabis and produce consistently good results indoors. However, the higher wattage HID lights tend to run hot and can leave a big mark on your electricity bill. You definitely want to make sure you’re getting the exact right lights for your space so you don’t pay for more light than you really need. HID lighting (HPS in particular) has another problem in that it’s been less popular over the last few years. This has made it increasingly difficult to find quality models if you’re not looking for a huge 1000W.

That being said, the smaller MH/HPS grow lights are actually really well suited to a small grow and don’t produce nearly as much heat as their bigger cousins. Check out a grow under a 250W HPS in a 2’x4’x5′ tent. I didn’t even use an exhaust!

See another grow under the same 250W light (with autoflowers), and yet another grow we did with 2 plants under a 600W HID grow light a while back. Learn more about HID grow lights.

Get a detailed breakdown of all the different types of cannabis grow lights



→Don’t know what type of lighting to pick? Choose your grow type based on your starting cost…



[paste:font size="5"]


These are the most common grow mediums:

  • Soil – grow in organic composted super soil for the easiest growing experience, or start with the popular Fox Farms Ocean Forest soil mix (FFOF already contains enough nutrients to last the first month of your young plant’s life).
  • Soilless Mix – anything besides soil including coco coir, perlite, vermiculite, etc. (all soilless mixes are technically considered hydroponic growing since there’s no soil).
  • Directly in Water / Hydroponics – Get some of the fastest growth and biggest yields possible, especially when combined with HID/LEC/LED grow lights.
  • Less Common Types of Hydro – Some people grow with plant roots suspended in misted air (aeroponics) or in a tank with fish (aquaponics), but these are relatively less common for cannabis growers.


What’s the Best Soil? Your absolute best option would be to compost your own soil (or purchase composted soil) which gets incredible taste results but does take a little more work (or money if you buy it).

For those of us who prefer pre-made mixes, I recommend starting with the popular Fox Farms Ocean Forest soil (often referred to as FFOF) since it’s already supplemented with plenty of nutrients that work very well for young cannabis plants. It’s a rich yet still somewhat airy soil that is made for plants just like cannabis and has been used by growers for years.

If you have limited soil options, choose an organic potting mix which is usually available in some form in the gardening section of any big-box store. As long as you use good cannabis nutrients (more on that below), a regular organic potting mix will work just fine.

Common cannabis-friendly potting mix brands in the US:

  • Kind Soil Pre-Made Super Soil (top-tier and organic)
  • Fox Farms Ocean Forest Soil (top-tier)
  • Black Gold All Organic Potting Soil (good)
  • Espoma Organic Potting Mix (okay)
  • Miracle-Gro Organic Choice Potting Mix (worst) – If you say you’re growing in Miracle-Gro soil, a lot of cannabis growers will wag their fingers at you. In addition to poor drainage, the original Miracle-Gro soil contains slow-release Nitrogen which is good for vegetative plants but bad for bud growth in the flowering stage and you can’t really rinse it out. Too much Nitrogen in the flowering stage can lower yields as well as possibly add a green or chemical “taste” to buds. However, if you’re going to use Miracle-Gro, their Organic Choice Potting Mix doesn’t have slow-release nutrients, which makes it a better option for growing cannabis than their standard version. It still drains poorly even with perlite, but if you’re desperate it does the job and you can get good results if you use good nutrients. The truth is that many growers have made it to harvest over the years with Miracle-Gro, despite some problems along the way, and even though it’s definitely not optimal, sometimes you have to do what you have to do!
Pick up a bag of perlite (found in the garden section) to help soil drain better unless it already contains perlite. Perlite looks like little white rocks and should be mixed in so you have about 70% soil and 30% perlite. Should you add perlite to your soil?



What type of pot should I use for soil or soilless growing mediums?

If you’re having a tough time deciding on a grow medium, you might want to think about starting with a mix of coco coir and perlite. It’s easy and low-maintenance. That’s how I got started growing (with CFLs as grow lights) and it’s also what I used in my 1-pound 315W LEC grow. Growing with coco coir can be a good choice for beginners because it’s cheap, holds water well, and doesn’t have as many of the problems associated with soil (bugs, root problems, etc.). Yet since it’s hand-watered, it’s intuitive and has a lot of the ease of soil growing.

I’ve heard many people recommend against growing cannabis hydroponically for your first time because it’s “too complicated,” yet I’ve seen growers succeed at every grow type even on their very first grow. If you really want to grow hydroponically, I recommend you don’t waste your time doing something else first. If you’re passionate about hydroponic growing and do your research before you get started, there’s no reason you won’t be able to do incredibly well your first time. Read our bubbleponics tutorial to see how GrowWeedEasy.com co-creator Sirius got started growing cannabis with top-fed DWC on his very first grow.

Learn more about different grow types here



[paste:font size="5"]super soil, you will need to get cannabis nutrients made for soil to make sure your plants produce at their best. Even if you started with an amended soil like FFOF, you will still need to start adding nutrients once you reach the flowering/budding stage as cannabis plants are heavy feeders and your plants will have already used up most of the nutrients in the soil by the time budding begins.


Soilless & Hydroponic growers – If you are growing in any medium besides soil, like a soilless mix or directly in water, you will want to get cannabis nutrients specifically made for hydroponics. Some nutrients are even more specific; for example, Canna Coco is formulated to work best for growing weed in Coco Coir. For hydroponic grows, I highly recommend the General Hydroponics Nutrient Trio – here’s the cannabis-friendly GH trio nutrient schedule I use with my cannabis plants.

One nutrient system to rule them all…

Looking for a suggestion? One of the simplest (yet inexpensive) nutrient systems that works extremely well for beginning cannabis growers is Dyna-Gro (Grow, Bloom)

Dyna-Gro can be used at half-strength in soil, water, coco coir, or any growing medium and works amazingly well for growing cannabis. It does not build up salt in your growing medium like many other inexpensive fertilizers, and it will never clog your hydroponic system.

Just use the “Grow” bottle during the Vegetative stage and the “Bloom” bottle during the Flowering stage. You can actually follow the instructions on the bottle. It’s super simple.

Like all nutrient systems, avoid starting at full strength or it can burn your plants! Learn more about nutrient burn. Only raise the dosage if you notice that your lower leaves are turning yellow and falling off (except in the last 2-4 weeks before harvest, when yellowing lower leaves is a natural part of the maturation process)

Learn more about cannabis-friendly nutrient systems

you can test the PPM of your water at home. Generally, as long as your water has less than 200-300 PPM (parts per millions) of extra stuff, it should be okay to use it for growing. If you are worried about the quality of your tap water, you can choose to use purified or Reverse Osmosis (RO) water, but you may then need to add extra Cal-Mag and possibly a few other supplements to help make up for the random minerals and nutrients that are normally found in tap water. I’ve personally always grown with straight tap water (in a big city in California with a natural PPM around 370, which is pretty high), and I’ve never had a problem. However, some places have very hard water, or tap water with unacceptable impurities, and growers in these areas will likely need to use purified water to get the best results.



[paste:font size="5"]

It’s important to maintain the pH of your root environment to prevent nutrient problems.

The easiest way to do that is to test the pH of your water before you water your plants or add water to your reservoir.

There are certain types of grows (such as when growing cannabis in organic composted super soil) where you don’t need to test your pH unless you run into problems. This is because with a properly composted super soil, you actually have a microbial colony living in the soil that will take care of the pH and hand-deliver the nutrients to the roots of your plants for you. However, this is a rare exception to the pH testing rule, and almost all growers need to regularly test and maintain pH for a successful grow. If you’re not growing in super soil that you have amended and composted (or purchased) yourself, testing and maintaining pH is a MUST.

Some growers will always get lucky and successfully grow weed without testing the pH of their water, but most people who don’t test for pH will start seeing signs of nutrient deficiencies and other nutrient problems.

If the pH at the plant roots is too high or too low, your plants won’t be able to absorb nutrients properly.

Even if plants do fine in the vegetative stage, cannabis plants tend to be more picky and prone to problems in the flowering/budding stage. Many growers have written in to tell me they got all the way to the flowering stage without testing pH, then were surprised that they start running into nutrient problems as soon as the plants start budding. In order to make sure this doesn’t happen to you, it’s important to get in the habit of testing pH right from the beginning!

Even if the right amounts of nutrients are present, your cannabis plants simply cannot absorb them if the pH isn’t in the correct range.

It’s actually really easy, quick, and cheap to learn how to check and adjust the pH of your water, and there are “pH test kits” specifically made for this purpose.

After you get the hang of it, checking and adjusting the pH and will take you less than 3 minutes each time you water your plants. And your results (monster yields with huge buds and healthy plants) will speak for themselves.

Soil: Maintain 6.0 – 7.0 pH
Hydroponics: Maintain 5.5 – 6.5 pH

Getting the pH exactly right isn’t nearly as important as checking regularly and making sure it stays within these ranges.

Click here for more information on pH testing.



[paste:font size="5"]

For those growers lucky enough to know other cannabis growers in real life, getting plants is usually pretty simple. Many cannabis collectives and dispensaries will happily sell you clones though they tend to be a little less liberal when it comes to selling seeds. A great advantage of purchasing clones or seeds from a trusted source is that you know you can trust the genetics you are receiving.

Starting with seeds vs clones

Yet many people do not know any other growers in real life. For these soon-to-be growers, the best option may be to purchase cannabis seeds online from a breeder or seed bank.

Surprising Fact: No one in the US has ever gone to jail or prison from simply ordering cannabis seeds online from overseas.

If you are considering this for the first time, you may be surprised to learn that, because of the way the laws about customs work in America, it is actually reliable and safe to buy your cannabis seeds online from a reputable seed bank as long as you get it from outside the US (sending seeds from one place to another in the US can get you in big trouble though!).

Learn more about safety precautions when ordering seeds online

Get Seeds – View a list of tested & trusted seed vendors: https://www.growweedeasy.com/seeds

Get Clones – You need to know someone with live female cannabis plants if you want to get clones. Many cannabis dispensaries and collectives will sell clones to prospective growers, or you might know someone who can give you a clone. Learn how to make your own cannabis clones!



Choose the Right Cannabis Strain

Trustworthy Breeders

13 Things I Wish I’d Known Before I Started Growing



[paste:font size="5"]Step 7.

There are many methods for cannabis seed germination.

Personally, I think one of the easiest ways to germinate a cannabis seed is to place it directly in a specialized starter cube like a Rapid Rooter.

Just keep the Rapid Rooters moist (but not soaking) and warm. It can help to put your tray on a seedling heat mat. Seedlings should pop in a few days to a week.

So far Rapid Rooters with a heat mat have given me the best germination rates of any method. They work with any growing medium, too – once the seedling has emerged, you can stick the cube directly into your growing medium or hydroponic system.

Learn more about germinating seeds via Rapid Rooter

Another popular way to germinate seeds is via the paper towel method.

Paper Towel Method:

You will need…

  • Cannabis seeds
  • 2 plates
  • Paper towels
  • Water
  • A place to plant sprouted seeds




NOTE: If seedlings seem to be “stretching” upwards or growing very tall, usually it’s because they want more light.

[paste:font size="5"]How long is the vegetative stage?

Cannabis plants keep getting bigger and bigger with long days (vegetative stage) and start making buds when they get long nights (flowering stage).

Young growing cannabis plants grow fastest when the temperature is a bit warmer than a comfortable room temperature, around 70-85°F (20-30°C). But as long as it doesn’t get freezing cold or burning hot, your plants should be able to grow in a wide range of temperatures.

How often do I water my cannabis plants?

In this stage, your plant will focus ONLY on getting big and strong. Buds and flowers are not part of the plant’s vocabulary yet.

If you’re feeding your plant with additional nutrients, start at half strength as it can be easy to burn your young cannabis plants. Bring to 3/4 strength one plant starts growing vigorously and if your plant displays signs of needing more nutrients even though the pH is in a good range.

Only feed nutrients at full strength if the plant is showing signs that it needs more nutrients (lower leaves are turning lime green, then yellow, then falling off – the first sign of a nitrogen deficiency, the most common type of deficiency – if the plant is not getting enough nutrients).

At this stage, you can’t tell if one of your cannabis plants is going to be a boy or a girl yet. Wait, why do I care if my plant is a boy or a girl?



Light

  • Give plants 18-24 hours/light a day in the vegetative stage when growing indoors. 18 hours of light a day is preferable, 24 is for the experimental type of grower.
  • If growing outdoors, try to make sure you plant gets strong, direct light for most of the day, at least from 10am-4pm, and more if possible.
The size your plant gets in this stage will have a huge impact on the final size of your plant.

How do I control how my cannabis plants grows during the vegetative stage?


Indoor growers
When do I switch my plant from the vegetative stage to the flowering stage?

How can I tell when the vegging stage ends?

What do I do if I run into problems?



[paste:font size="5"]When should I change my light schedule to 12-12?

  • Outdoors, your weed will naturally start flowering when the days get short enough, usually a few months before winter.
The flowering stage is where your plant goes through “puberty” and basically reveals whether they are a boy or a girl.

Unfortunately, for regular seeds, half your plants will end up female and half will end up male. That’s why a lot of growers prefer starting with clones or buying feminized seeds – all the resulting plants will grow into females.

As cannabis growers, we’re only looking for females as female plants are the only ones that make buds. Male plants just make pollen sacs (balls) that cannot be used for smoking.

A week or two after you initiate the 12-12 light schedule (or naturally in the wild), your plants will reveal their gender…

Female plants start growing wispy white hairs at the tops of branch joints. These are the pistils of her flowers/calyxes. You’ll get bunches of these calyxes growing on top of each other to make buds, and each calyx will have a few white hairs coming out of it. This is great news! It means this plant will eventually grow beautiful weed with buds/flowers/ganja that you can smoke.



Male plants start growing balls/pollen sacs with no white hairs/pistils. Unfortunately, most male plants do not develop psychoactive properties like girls do in their flowers. Plus, male plants can pollinate your female plants and cause them to make less bud and more seeds. Therefore, most serious cannabis growers choose to remove and dispose of male plants as soon as they show their sex.



Note: The sturdy green growths are not pistils, they are always there on both boy and girl plants. When looking for gender, you’re specifically looking for white wispy hairs (pistils).

Learn more: Is my plant a boy or a girl?

Ok, so you’ve gotten rid of your male plants. Your female plants will be growing more and more white hairs and before you know it, actual buds/flowers/trees are forming. Woohoo!

Now that you’re fully in the flowering stage, it’s best to keep temps slightly cooler, around 65-80°F (18-26°C) to produce buds with the best color, trichome production and smell. Learn more about what you need to do in the flowering stage to produce top-shelf buds.

How to Increase THC Levels

How to Increase Overall Bud Quality and Appearance

It’s important to pay close attention to your cannabis plants during the flowering stage. This is because in this stage your plant is much more likely to suffer from nutrient problems as they’re focusing all their energy on growing buds.

What Determines Yields?

“Flushing” Your Plants Before Harvest





[paste:font size="5"]

When to Harvest Weed? Is She Ready for Harvest?

  1. Wait until your buds stop growing new, white hairs. By this point, your buds should be fragrant (the whole grow room or area will likely smell strongly of cannabis), plump and ‘filled out’.
  2. Wait until at least 40% of the white hairs have changed color (darkened) and are curling in. This marks the beginning of the harvest window. Buds harvested now will have more of a speedy effect and are not at full potency.
  3. Harvest when 50-70% of the hairs have darkened for highest THC levels
  4. Harvest when 80-90% of the hairs have darkened for more a couchlock, anti-anxiety effect (some of the THC has turned into the more relaxing CBN)
The hardest part of growing cannabis for many new growers is waiting for the right time to harvest.

There are additional cannabis harvest methods which are much more precise – such as using trichomes to know when to harvest your buds.

Learn exactly when to harvest your cannabis (with tons of pictures and explanations)

I sometimes get asked how to harvest weed… (i.e. cut it down from the plant)

Just get a sturdy pair of scissors and cut the plant down in the most convenient way possible. Seriously…that’s it!

Trimming comes next; it’s one of the most rewarding and physically taxing parts of the entire grow, but it’ll be worth it!



[paste:font size="5"]Learn how to dry and cure your buds like a professional, every time

Dry buds slowly for best results and check often for mold or overdrying. You’ve worked way too hard to lose your crop now!

After your cannabis buds have dried (thin stems snap, but the thicker stems are still a bit bendy), it’s time to start curing them so they’re smooth, taste good, smell good, and have the best effects.

To cure your buds, put them in tightly-closed quart-sized mason jars in a cool dark place. Fill each jar loosely about 3/4 of the way full.

For the first 2 weeks of curing, open the jars once a day for several seconds to get fresh air in your jars and release any moisture.

If your buds feel moist when you check on them, leave the tops of the jars off until the outsides of the buds feel dry to the touch. Too-moist bud is what causes mold!

Special products like “Boveda 62% Humidipaks” will make curing a lot easier, as they will naturally regulate the humidity in your jars.

After your cannabis has been curing for at least 2 weeks, and they haven’t felt wet every time you’ve checked the jars for at least a week, you can start opening the lid once a week instead of once a day.

Some people only cure their bud for 1-2 weeks total while other cure their bud for 30 days or more. Because you need to open the jar regularly, you can always sample some as it’s curing to get a feel for whether it’s done or not.

I personally think that cannabis tends to be more potent if you cure it for at least a month.

Curing for longer than 6 months doesn’t do anything, and cannabis can become less potent over time as THC turns to CBN. Keep your harvest in a cool, dry, airtight space for long-term storage.

Read the complete drying and curing tutorial – no more guesswork!



That’s it! 10 Simple Steps and You’ve Got Your Very First Cannabis Harvest!


 

roots69

Support BGOL
Registered
How Long Does It Take to Grow Weed Indoors?


This is one of the most common questions we receive from curious soon-to-be indoor cannabis growers: How long does it really take to grow weed? What’s the growing timeline?

It’s actually a really good question! Every new marijuana grower should know how much work they’re signing up for! The short answer is…

The Average Indoor Grow Takes 3-5 Months





The long answer is: from Day 1 of your weed plant’s life to actually smoking your harvest, it can take… 8 weeks – 7+ Months! That’s a huge range, right?

That’s why most cannabis growers won’t give you a straight answer. The truth is, there are many factors will affect the total time until you have ‘ready’ buds, by days, weeks or even months. This includes your strain, your setup, and how big you plan to grow your plants (bigger plants need more time!). So instead of giving you a huge range, an easier-to-swallow answer might be to say that the average grow takes 3-5 months for indoor growers.

This includes the time needed to grow your cannabis plant from seedling to harvest plus an additional 2 weeks (or more) which is used to cure your cannabis buds after harvest (making them more potent and better smelling).

Additionally, for at least the first time you grow, you also need to consider the time needed to get your equipment and seeds/clones.

This article will give you the total time breakdown, so you can plan out the details of your grow in order to achieve the harvest times you desire:

Ultimately, How Long to Harvest Marijuana Depends on the Desired Yields, Strain and Grow Style



Today I will show you how to plan your grow so it takes the amount of time you want!



Jump to the Section of the Tutorial You’re Interested in:

  1. Before You Start Growing Weed (0-4 weeks) – Get seeds and supplies so you’re set to start growing!
  2. Time Needed to Grow Weed, From Seedling to Harvest (8 weeks – 5+ months)
  • Germinate Your Seeds (1-7 days) – Learn about fail-proof methods to germinate perfectly in soil/coco or hydro.
  • Vegetative Stage (3 weeks – 8+ weeks) – In the vegetative stage, the cannabis plants are growing just stems and leaves. On average, most indoor growers vegetate their plants for 4-8 weeks. Seedlings are able to start flowering as early as 3 weeks from germination, but the resulting plants will be tiny. Most growers choose to let plants vegetate for longer because giving them more time to grow results in bigger plants, which tend to produce bigger yields as long as you have enough light to cover all the bud sites. That being said, you can still produce quite a bit of bud with a lot of small plants growing at once as long as you fill up your grow space.
  • Flowering Stage (5 weeks – 16+ weeks) – This is when plants start making buds. The length of the flowering stage depends heavily on the strain/genetics, with an average of about 8-12 weeks for most strains. Some strains are bred to have very short flowering stages (for example, most auto-flowering strains will naturally start flowering at around 3 weeks old and some are ready to harvest just 5 weeks later, for a total of only 8 weeks from seed!). Other strains can take months in the flowering stage before they’re ready to harvest. Typically, longer-flowering strains produce higher yields than short-flowering ones because the buds are exposed to more light-hours and have more time to fatten up, but that’s not always the case.
  1. Post-Harvest (This is when the smell/taste/look you love shows up) (2-4+ weeks) – After buds are harvested, they still need to be dried for about a week (sometimes a bit less or more), then placed in glass jars to “cure” for at least 2 weeks. This post-harvest processing dramatically improves the taste, smell and the perceived potency of the buds. It also reduces the chance of buds causing headaches or unpleasant “speedy” effects. Don’t skip this step! It will account for nearly 50% of your final bud quality! Learn how to dry & cure your buds to perfection.
If you choose the right strain, you could be smoking your own buds as soon as 3 months from germination!





[paste:font size="5"]examples of new grower shopping lists to learn exactly which supplies you’ll need.

Get seeds or clones: 0-4 weeks:
If you have instant access (like knowing a grower, or ordering seeds from a seed bank in your country), this should take only a little time. If you order from a seed bank overseas (especially US residents), expect a wait of about 1-4 weeks to get seeds.





[paste:font size="5"]soil/coco or hydro.





auto-flowering strain), because you’re the one to ‘flip the switch’ and get your plant to enter the next life stage: flowering.

Wait, how do I switch my plant from the vegetative stage to the flowering stage?

When you start with a seed, even with an auto-flowering plant, you will always have at least 2-3 weeks of vegetative growth before any buds start forming no matter what you do. Growers generally allow their plants to stay in the vegetative stage from a few weeks to a few months.

The size your plant achieves in the vegetative stage has a very large effect on your final yields since bigger plants produce more bud sites than smaller plants. However, you need enough light to cover all the bud sites or they will never develop properly. Light is like food for bud growth!

These vegetating plants are about 4 weeks old from germination



To give you an idea as to what your FINAL marijuana plant may look like depending on how long it spends in the vegetative stage…







These auto-flowering plants spent about 3 weeks in the vegetative stage before they automatically started flowering, and were ready to harvest just 5 weeks later. They were about a foot tall at harvest and yielded approximately 2 ounces each. Read the step-by-step tutorial to grow plants exactly like this.





This marijuana plant spent about 6 weeks in the vegetative stage before being changed over to flowering and yielded just over 6 ounces at harvest. View the complete grow journal with instructions on how to grow your plant so it looks just like this at harvest!





These cannabis plants were vegetated for about 8 weeks before being flipped to the flowering stage. Although they were grown in the exact same conditions from seed to harvest, their final heights are remarkably different because their strains had vastly different genetics. The smaller plant produced 6.6 ounces, while the big plant produced 9.3 ounces. Strain can make a big difference! Learn about growing different strains together.





These cannabis plants were vegetated for about 9 weeks before being flipped, in the exact same setup as above, and produced over 10 ounces each. Besides an extra week of veg, the biggest difference between this grow and the one above was simply the strains.





This human-sized plant (one of my very first plants) spent a little more than 3 months in the vegetative stage before I realized I needed to turn it over to the flowering stage. It then spent another 12 weeks in the flowering stage before it was ready to harvest because it was a long-flowering strain. It got way too tall for its space (taller than me!) and started falling over. However, despite the huge size and more than 5 months of growth, it only ended up yielding about 6 ounces. This is because it was under weak CFL grow lights. Though there was a lot of buds, the lack of strong light made them airy, without a lot of weight. Click the picture for a close-up.





Some people put their seedlings or clones right into the flowering stage if they want to harvest quickly though this makes for extremely small plants. For example, super-stealth growers who are growing in small hidden spaces – like out of a computer case – would want to put their seedlings into flowering nearly right away to keep their plants as small as possible. It’s also important to remember that container size and grow lights make a big difference. Small containers constrain the roots and keep plants from getting as big as they could, and small lights prevent buds from fattening up as much as they could.

I personally recommend at least 4 weeks in the vegetative stage with 18+ hours of light each day for the best results. Plants that are forced to start flowering sooner than 4 weeks don’t yield much compared to how much work you put in. That being said, keeping plants relatively small does have some benefits!

A good rule of thumb…

Your plant will likely double in size (maybe a bit less, maybe more) from when you first put it into the flowering stage; this is known as the Flowering Stretch. So make sure you end the vegetative stage before your plant reaches half the final height you want, or your cannabis plants may outgrow your grow space during the flowering stage!



Complete Flowering Stage Tutorial)

  • Week 1-3 – Transition to Flowering
  • Week 3-4 – “Budlets” Form
  • Week 4-6 – Buds Start Fattening Up
  • Week 6-8 – Buds Ripen, Pistils Darken – some strains spend longer in this stage
  • Week 8-12+ – Flowering Ends, Final Flush, Harvest
The length of time needed to stay in the flowering stage depends heavily on the strain. Once you have switched your plant into the flowering stage they will stretch (the ‘flowering stretch’), form buds and then fatten.

Looking for something special? Learn how to find the right strain to grow

Here’s a list of some of my favorite and best cannabis strains by length of flowering period:

Short (6-8 weeks)

  • Northern Light – Known for being especially easy to grow
  • Critical Mass CBD – High-yielding, medical, high-CBD, medium-THC strain
  • Quick Critical + – Based on their award-winning Critical+ strain but with a much faster finish
  • Blue Cheese – This version of Blue Cheese is not only fast flowering, the plants grow fast and should be flowered when the plant is only 1/3 the final desired size because it may triple in height after the switch. This shaves extra time off the vegetative stage. Great effects!
  • Frisian Dew – One of the best strains for outdoor growing (and buds may turn pink or bright purple!)
  • Shiskaberry – A gem by Barney’s Farm, this strain “lifts you up” and causes a strong “head high” that can be a great way to relax after a tough day, or for when you want to get in a creative mood.
  • Seedsman Fast Collection – Seedsman sells seeds from a variety of breeders, but they also breed their own strains. They created a selection of 3 of their most popular “fast” strains that need about 6-7 weeks in the flowering stage. Anything that’s been bred by Seedsman is a great choice, and you will get exactly what they describe (very reliable strains).
  • Auto-flowering Ultimate – One of the most potent auto-flowering strains I’ve grown so far, ready in about 10 weeks from germination (7 week flowering stage) and just overall a healthy and high-yielding plant. I plan on growing another one in my next auto-flowering grow!
  • In fact, if you’re interested in a very short flowering time, most auto-flowering strains are ready to harvest less than 3 months from seed.
Frisian Dew plant growing outdoors with deep purple buds



Medium (8-12 weeks)

  • Original Amnesia – Strong effects and very easy to grow. View grow journal
  • Supreme CBD Durban – Medical strain, has a THC:CBD ratio of 1:1
  • Pineapple Chunk – An award-winning strain that’s fruity, vigorous and potent! Its yields are not necessarily the highest, but I believe it’s worth it for the extremely high quality of buds. One of my favorite strains I’ve grown, and I definitely plan to grow it again!
  • Liberty Haze – An award-winning strain that’s curiously strong and one of the few “haze” cannabis strains that doesn’t take forever to finish flowering. Good yields!
  • Gelat.OG – An amazingly well-done cross between Gelato and OG Kush, which are two extremely popular strains in the US on the west coast. Finishes on the faster side, yet has great yields, potency and smell!
  • Wedding Gelato – Another beautiful Gelato cross, this time with the famous Gelato 33 clone (a very specific cut of Gelato), with Wedding Cake (which has taken the west coast by storm in the last few years).
  • Strawberry Lemonade – As pleasant as it sounds, with high potency and uplifting effects. Also is typically very easy to grow.
  • Gorilla Zkittlez – Another west coast favorite, this is produces beautiful buds that are covered in crystals/trichomes and is also very high yielding.
  • Peyote Critical – This strain seems to get rave reviews from everyone who tries it. Buds produce powerful effects and occasionally the buds even turn purple.
Long: (12-14+ weeks)

  • Many Haze strains, as well as some Sativa strains, and generally any strains that originated near the equator.
  • Arjan’s Ultra Haze #1 – A cross between some of the best Haze strains in Southeast Asia. If you want to try something different that is almost impossible to find in the US or Europe, this is it! It produces psychedelic effects that defy its cannabinoid content. May be too intense for some people!
In general, most strains (besides auto-flowering strains) are in the medium range as far as how long they take to flower.

It’s not exact – There’s a 2-3 week harvest window for most plants, and keeping your plants in the flowering stage for a bit longer tends to increase your yields. This is because the plants tend to really bulk up their flowers once they’ve become ‘ripe’.

So often times, even though you could harvest at the shortest recommended time, waiting an extra week or two will give you an extra 10-30% more yield compared to harvesting as early as possible.

Utopia Haze is a mix of Brazilian landrace strains





[paste:font size="5"]Drying: 4 – 10 days
Good marijuana buds can be dried in as little as 4 days, but ideally, drying should be a slow process taking up to a week or more. Making sure your plants have been thoroughly dried (but not over-dried) will lower chances of mold during the curing process.

Curing: 2 weeks – 1+ months
Curing really seems to make the effects of buds feel less ‘speedy’ and be better suited to medical applications like treating anxiety, reducing pain, and improving feelings of depression.

Additionally, curing gets rid of any ‘cut grass’ smell, harsh taste and other undesirable traits of some freshly dried buds. Over time with proper curing, those traits will be replaced by the ‘real’ smell and potency profile of your buds.

Two weeks is considered the minimum time to cure your buds, but I personally cure all my buds for a month or even a bit longer because the buds continue to improve for several more weeks.

So, after you’ve bought seeds and equipment, grown a plant from seed to harvest, trimmed, dried and cured your buds, that brings us back to the original answer…

Total Time to Grow (and Be Ready to Use) Your Own Weed:
8 weeks – 5+ Months

Average Time to Grow (and Be Ready to Use) Your Own Weed:
3 – 5 months


If you haven’t started growing your own weed yet, today is the day!

Read the complete guide to the basics of growing


 

roots69

Support BGOL
Registered
What’s that smell?

Have you ever been standing somewhere with no one around, and you catch a hint of marijuana smell in the breeze? Even if you couldn’t spot the source, you wouldn’t doubt what your nose told you.

One of the most appealing parts of cannabis is its pungent, unique smell. Unfortunately, that same delightful smell is instantly recognizable and can cause lots of trouble.

A grow room with flowering marijuana plants is a factory for that delicious tell-tale smell, and to protect your girls, you’ll have to make that smell a non-issue.

Today we’ll quickly get you up to speed the options available to neutralize smells made by your plants, and we’ll explain which methods are most effective.

There really aren’t a lot of options when it comes to stopping smells in the grow room. Either you find a way to “scrub” the smells out of the air, or you find a way to cover up the smell.

For a small grow with just 1 or 2 plants, you can usually get away with covering up the smell.

For a larger grow, you will likely need to scrub the air to make sure you’re not leaking any smells that might catch the attention of nosy neighbors.

Here are the main ways to get rid of smells in your grow room:

[paste:font size="6"] These are hands-down the best option for controlling marijuana grow room odors. Carbon filters (also called ‘carbon scrubbers’) will actually pull the smells out of the air, neutralizing any odors that pass through.

Carbon filters are what you need if it’s important to neutralize the air coming out of your exhaust. A good carbon filter will make sure you never accidentally leak the smell of cannabis out through a window into your neighborhood.

These devices use activated carbon to chemically absorb smells and other impurities from any air that is pushed through the filter.

With a carbon scrubber, you need to set up a situation where the smelly marijuana air is being forced through the filter. In other words, you need to use a fan to push or (even better) pull air through the carbon filter.

The most common way to do this is to set up a carbon filter as a part of your exhaust system in a sealed grow tent, and use an exhaust fan pulling hot air away from your grow area. As hot air is pulled out and away from your plants, the carbon filter scrubs odors from the air on the way out.

Example of a carbon filter set up in a grow tent – this device scrubs all smells from the air so odors never leak outside the tent



Carbon filters are…

  • highly effective
  • extremely easy to maintain once they’ve been set up
  • last a long time
[paste:font size="5"]
ir
ir
ir


6″ Carbon Filter (300-400 CFM)Matching 6″ (400 CFM)Fan6″ Ducting

Fits any standard 400W, 600W & 1000W MH/HPS system – learn more about MH/HPS grow lights



3.) Install fan and filter into exhaust system

Refer to the diagram below to see how a carbon filter should be set up in your exhaust system. The carbon scrubber being placed at the back of the exhaust system minimizes the risk of flowering cannabis smell escaping.





Learn more about setting up a grow light with an exhaust:
https://www.growweedeasy.com/hps-grow-lights-setup

Smell Emergency?

One trick to clear a room of smell that I’ve learned will work in an emergency is to put an exhaust fan on top of a carbon filter, and place it wherever the smell is strongest. I’ve done this when I’m cooking cannabis in the oven (which can smell up the house) or if I’ve been smoking and suddenly realized I have guests coming. It looks like this:



You don’t even have to attach the fan to anything, you can just let the scrubbed air go back into the room. It’s pretty amazing how fast this can clear up a smelly area! I learned this from a dispensary owner. Here is an example of a fan/carbon filter combo.



[paste:font size="6"] Unlike a carbon filter, odor neutralizers don’t “scrub” the smells from the air.

These products are designed to bind with unpleasant smells so that the smell is “neutralized”. Often they also have a very strong fragrance to help cover up smells.

I’ve heard of growers using everything from incense to “bathroom sprays” to cologne to try to cover up the smell of a flowering marijuana plant.

Most household products like wall plug-ins and sprays just aren’t strong enough to cover up the smell of a marijuana grow room for long, if at all.

Also, using these products on your cannabis plants can reduce or alter their natural smell.

Any odor neutralizer or fragrance needs to be constant since your plants don’t stop making their unique flowering scent once they start. Once the smell arrives in your grow room, it basically keeps getting stronger until harvest.

However, there are a few heavy-duty products available that are effective for small-scale marijuana grow rooms.

Sprays, Glade Plugins, etc – Generally these are only effective for a few hours at most. Only recommended in an emergency!

Best spray to cover up smells in an emergency: Ozium Air Sanitizer – this smells very “citrus clean” that seems to do pretty well at covering up cannabis odor without smelling like you just sprayed a bunch of Febreeze. The only thing to keep in mind is a little bit goes a long way. A quick spritz is all you need!



Warning: Never spray any odor neutralizer near your plants in the flowering stage or the smell can stick to the buds!

Recommended Marijuana Odor Neutralizer – Ona Products

Ona Gel and Ona Blocks were originally developed to control the smell inside sewage facilities. They are now available to consumers because they are remarkably effective at neutralizing odors.

Ona products are quick and easy to use. They are effective at covering up smells in a small grow room, though they will only work for a relatively short window of time and must be replaced every few weeks up to a few months.

Ona Gel in the original scent seems to be the most effective for covering up marijuana smells in our tests. With a few flowering plants in a grow tent or closet, you will be able to cover up almost all smells with one or two of these placed outside the grow room.

Never place Ona products in with your flowering plants!

If you use Ona products in your living room, den, or other open areas, no one who enters those rooms will be able to smell any sign of your cannabis plants, even if the plants are just a room away.

But Ona products can reduce or alter the smell of your cannabis buds if they share the same air, so you should never place Ona products in the same area as your flowering plants.

If you need to neutralize the smell coming out of your exhaust, a carbon filter (#1 on this list) is highly recommended. You could also have your exhaust air blow over an Ona product right before being vented outside. It is not recommended to use Ona products in your grow area alongside your plants. Ona products are meant to be used outside the grow area.

PSA: Don’t use ONA to control smells IN the grow room

How long do they last? It depends on the size Ona Product you buy, as well as the temperature/humidity of your grow area.

Generally, they seem to last at least 4-6 weeks for most growers, which is long enough for a few of these to provide coverage throughout the smelly second half of the flowering stage.

Ona Gel Pro

(stock up on these to make sure no one can smell cannabis in your home)

[paste:font size="6"] We all love the idea of having pure air to breathe. Many air purifiers come with the claim of reducing smells, usually by means of a filter. Do these work to get rid of smells in a marijuana grow room?

Not really.

It is true that some air purifiers do help remove some smells from the air. However, these are not strong enough to pull all the smells from a grow room. These are only marginally effective.

Therefore, while air purifiers may be a good choice for other reasons, I do not recommend getting one just to try to get rid of smells in your grow room.

[paste:font size="6"]http://www.arb.ca.gov/research/indoor/o3g-list.htm).

More importantly, ozone generators are actually bad for YOU!

Here are just a few of the many links to research from reputable institutions all saying the same thing: Ozone generators are bad for humans!

Some growers claim to have safer ways to use ozone in their grows, such as venting ozone out of the house or making sure ozone only goes into the exhaust. Again, we would strongly recommend against using ozone since in the best case, it’s only doing what a carbon scrubber can do. In the worst case, it’s hurting the lungs of you, your pets and your family!







Make Sure Only YOU Get To Enjoy Your Plant’s Smell!



Start growing a Low Odor Marijuana Strain today!

These strains produce neutral, non-marijuana-like odors…
even as they approach harvest!

 

roots69

Support BGOL
Registered
Why the First Few Grows Can Seem So Tough…


I’m not ashamed to admit that my first few grows ended in complete failure. I had some bad information, and I combined that with some over-priced products and a dash of over-zealousness. For most of my early attempts, I ended up with plants that never got the chance to make even tiny buds I could actually harvest.

This plant was doing so well… but it suddenly got sick less than a month away from harvest!



After some time and practice, I can now grow more high-quality bud than I can use while expending a minimal amount of time and effort. But I’m not special…

I’m no artist, prodigy, phenom or anything even remotely close to those things. I just learned how to fix a few mistakes that were holding me back as a grower, and today I’m going to go through some of those common setbacks and make sure they don’t…well, set you back!

Too Much Love

Is it possible to love something too much? I’d say Nebula might love cats too much. A baker in my neighborhood once told me I love desserts too much (that really happened, and he was right).

Loving your plants too much isn’t really the problem, it’s the extraneous attention we give as a result of that love. When it comes to growing cannabis, that extra love can mean that growers check on their plants more often than needed. While there’s nothing wrong with checking on your plants often (that’s actually a good thing), these extraneous check-ins increase the chance that the grower is going to do something to the plants. A poke here, a trim there, maybe a little water…

The fact is, plants spend a lot of time not doing much. Or rather, they spend a lot of time doing things very slowly. This means that there will be long periods (sometimes days) where there isn’t much (if anything) for the grower to do besides give water.

Unfortunately, there isn’t a trick to beating the waiting game. Just treat these times like the perfect opportunity to practice patience, because the flowering stage requires much more of it!

Is My Plant Really Thirsty?
hand-in-clean-water-sm.jpg


The best instructions are specific. Well-made, specific instructions can teach anyone to do almost anything. The bane of good instructions is telling the reader to make a judgment call. Ideally, instructions can tell you exactly what you need to do from beginning to end.

Unfortunately, plant watering requires many judgment calls. How often do I water? How much do I water? Am I watering too much?

It would be nice to be able to tell growers, “Give your plants exacts .5 gallons of water every Monday and Thursday until harvest.” But there are too many variables (strain, container size, growing medium, etc.) to be able to give advice that accurate. Luckily, watering is a breeze after a couple of attempts, and here are some tips to make it even easier.

Note: Make sure your pot/container has proper drainage. This means excess water should be able to freely escape the bottom of the pot.

How to Water Cannabis Plants
  1. Soil – Wait until the top inch of your medium feels dry (or the pot feels light).
    Coco coir – Aim to water plants every 1-2 days. If coco is staying wet for 3+ days, give less water at a time until plants get bigger and start drinking more. Don’t wait for your coco coir to dry out, but don’t water if the top 1/2″ (~1.5 cm) feels “wet”. If the container feels light, it’s definitely time to water!
  2. When watering with nutrients added to your water, make sure that 10-20% of the water comes out the bottom of your container. This helps prevent pH problems and excess nutrient buildup amongst other things. If growing in soil with no added nutrients in the water, try to give enough water that you get just a tiny bit of runoff (so you’re not accidentally washing away all the nutrients in your soil).
  3. Go back to Step 1.
Note: If you have small plants in a big container, give only a little water at first, maybe just a few cups at a time. You want to be giving just enough water that it dries up within a few days. If the medium is completely dry by the next day, you need to give more water at a time. If it’s taking more than 3-4 days to dry out, you need to give less water at a time until the plant is a little bigger and drinking more.

Great instructions on watering: https://www.growweedeasy.com/how-often-water-marijuana



Playing the Light Game
There are plenty of ways to deliver light to your plant. Some growers are lucky enough get their light straight from the sun. *grumble*

As indoor growers, we have to navigate the hotly-debated and sometimes confusing world of indoor grow lights. Every side claims to be the best for one reason or another: T5 users say their bulb is stealthy and low cost, LED and LEClovers say their lights are the future, and those in the HPS camp claim their light is king!

Compare Grow Light Setups & Learn What Yields to Expect



The fact is, most types of grow lights will work just fine under the right circumstances. If you’re somewhat new to growing indoors and are having a hard time deciding on a type of grow light, here’s what I would recommend:

Small stealthy grows, PC grows, file cabinet grows, or just trying to get a feel for the process

  • T5s if you have the space for them, CFLs if you don’t (or to supplement the T5s)
  • As long as you have at least 4′ of height, you can often use a small LED even in a very tight space
A small grow tent (2′ x 4’ or 3′ x 3′), regular closet or something similar

  • T5s will work well in this scenario
  • A 250w HPS or a 315 LEC would be tough to beat in a small space like this. A 400W HPS would work well in a 3’x3′ tent.
  • Relatively lower powered LEDs (between 120-400w) will work in this case, as well!
Larger grow tent (4’ x 4’ or bigger), walk-in closet or something similar

  • One or several higher powered LEDs (400w+) would excel in this area.
  • A 600w or 1000W HPS is the golden standard for this size of grow… for now.
Huge grow areas like a garage, shed or an entire room

  • Multiple 1000w HPS lights are the standard for big indoor grow operations
  • The sun. The price is great and sunlight provides the perfect light for your plants!
Read more about different types of cannabis grow lights: https://www.growweedeasy.com/grow-lights

If you want to upgrade your grow lights, read this: https://www.growweedeasy.com/grow-light-upgrade-guide

Bad Seeds = Confidence Killer
Growing with bad marijuana seeds is particularly harsh on growers of all levels.

This is mostly because it’s tough to pinpoint when the seed itself is the actual problem. Most growers will blame themselves for a problem that shows up in their grow long before they assume it’s the seeds. If a seed fails to germinate, I always wonder what I could’ve done, even if I provided good conditions.

When I say “bad seeds”, I mean any type of seed that has a significantly higher chance of causing problems in a grow. This includes:

Bag Seed

  • Seeds you randomly find in weed you buy isn’t supposed to be there, so that means that the genetics are a toss-up. Even if the seeds started with good parents, there’s no telling how high or (more likely) low the quality will be. Unfortunately, the only way to find out is to grow it. Some growers win the genetic lottery, but many others lose out.
Beat-up Seeds

  • These are seeds you might get from a friend, or maybe you have them stashed somewhere and forgot how you got them. In either case, if the shell of the seed looks beat-up, it may not germinate as well or quickly as seeds that were stored in good conditions. This doesn’t mean you should toss beat-up seeds! Just be aware that they have a higher chance of not germinating.
Old Seeds

  • Seeds are little nuggets of genetic material hoping to grow into plants. And like all other genetic material, it doesn’t last forever. Although seeds can be viable for quite a few years after they’re made, the chances of them successfully germinating goes down over time.
Check out the picture below. We planted all these seeds at the same time. The tub on the right has seeds that were planted within a week of receiving them in the mail. The tub on the left has a very popular strain with award-winning genetics… but the seeds were more than 6 years old from when we first bought them. Even though they all started germinating at the same time, the seeds on the left got outpaced by algae! Although they did eventually sprout (you can see a little seedling in the picture), they were too far behind and got axed.



Sometimes It’s Random!

  • Even if you’re starting with the best, most fresh seed stock, occasionally you’ll get an individual seed or plant that just doesn’t grow as well or quickly as the others. Don’t beat yourself up if this happens. It’s always a good idea to sprout at least a few more seeds than you need in case you happen to run into a runt. If all your plants are healthy and growing fast except one, you can blame the seed!
Don’t deal with bad seeds: https://www.growweedeasy.com/seeds



Plant Food Should Be Easy, Right?
When it comes to cannabis nutrients, there are dozens of companies vying for your money. Why?

There are two main reasons:

  1. Nutrients don’t cost much to make, but they tend to sell for higher prices. Profit!
  2. Cannabis plants have simple requirements, so it isn’t difficult to make nutrients that satisfy those requirements.


In short, this means that even a no-name company can make nutrients that work as well as high-priced nutrients. This lower barrier of entry combined with high profits makes for a lot of competing companies who all essentially do the same thing.

This can be tough for newer growers because it means they have to wade through a bunch of products to find something that does the job.

If you’re in this spot, allow me to narrow down your choices to a few proven companies that work great for growing cannabis!

Important note: Although some growers associate nutrients with “feeding”, think of light as being closer to food for your plants than nutrients.

More information about picking the best cannabis nutrients: https://www.growweedeasy.com/nutrients

Trying Advanced Techniques Too Soon
There are some growing techniques that growers can try out on their first grow if they’re feeling adventurous enough. There are simple plant training techniques (such as FIM’ing and low-stress training) that are easy, have low time requirements and are low risk. This means that even new growers can try them out without much consequence if things don’t go right.

On the other hand, there are techniques like Manifolding, ScrOG and defoliation. These techniques can be tough to do, they carry a higher risk for your plants, and they can add days or weeks to your total grow time if done the wrong way.

Never try any new techniques if your plant is sick!



Although those advanced techniques are great in the right conditions, they should only be used when the grower feels comfortable with growing cannabis without training. You also don’t want to use training techniques when they aren’t needed. Some people can grow untrained plants and still exceed their goals for yields.

For example, a grower could start a ScrOG setup and end up having to spend additional hours each week making sure the ScrOG net is being utilized correctly. Conversely, if that grower doesn’t need a lot of weed, they could be using a much simpler setup and still grow much more bud than they could use.

In short, keep it simple until you know you’re ready for something more advanced.

Getting Set Up
Getting your grow area set up is like picking out lights, but worse. There is a lot of money being made in selling growing equipment, especially since cannabis cultivation isn’t fully mainstream yet and the prices for some equipment is inflated.

This means that you have way too many choices when it comes to getting your equipment. Luckily, one of our greatest strengths as humans makes for a simple solution to this issue: our sociability!

What kind of grow setup should you get?



If you’re thinking about buying a particular product, make sure to do a little research before you buy it. Reviews can give you insights into products that you normally have to purchase to find out. I’ve also learned a great deal of valuable information from the people who work at my local hydroponic stores. In fact, my first real setup was almost entirely comprised of suggestions from knowledgeable growers in my local hydro stores. They saved me the time of trying out products that could have potentially disappointed me, and instead helped me get gear so good I can’t leave it behind!

Don’t have anyone to ask in person? Learn what you need to start growing cannabis indoors. Or check out our forum!

 

roots69

Support BGOL
Registered
What are Cannabinoids?
Since you’re here, you’re likely somewhat familiar with cannabinoids and their potential health benefits. However, with the truly mystifying amount of incorrect information out there, getting up to speed on the truth behind medical cannabinoids is surprisingly difficult. To make things easier, we’ve put together this comprehensive guide on cannabinoids so that you can decide whether the substance is right for you.

With this guide, you’ll learn all you need to know about cannabinoids, including what they are, why they might be good for you, how long they’ve been around, whether they’re legal, and how you can get legal access where you live.

Read through this article to get all the details, or skip to the section you’re most interested in:cannabidiol (CBD). Hemp has 0.3 percent THC or less while the threshold for Marijuana starts at a THC concentration of 0.31 percent or higher. Both forms of cannabis, hemp and marijuana, have been shown to contain medically beneficial levels of differing cannabinoids, active compounds found in the cannabis plant.

Cannabis plants contain over 85 cannabinoids, some of which have been found to have therapeutically beneficial properties. CBD and THC are the two major cannabinoids that through academic and scientific studies have shown to possess the most therapeutic properties. However, several other cannabinoids, like cannabigerol (CBG) and cannabinol (CBN), also exhibit health benefits.

Each of these cannabinoids interact directly with the body’s endocannabinoid system – a signaling network found within every mammalian species on Earth. The system features two cannabinoid receptors, CB1 and CB2 receptors, which cannabinoids like THC and CBD “dock” with to provide their therapeutic effects.

THC, the mind-altering cannabinoid, has shown to increase appetite, reduce muscle control problems, and reduce nausea, pain, and inflammation. The non-psychoactive compound CBD has shown to reduce pain and inflammation, as well as be effective in killing certain cancer cells, controlling epileptic seizures, and treating mental illness.

To date, cannabis has not been recognized or approved by the U.S. Food and Drug Administration (FDA) as a food or medicine, but the agency has approved some cannabis-based medications for distribution in the U.S. In addition, over half the states and territories in the U.S. have legalized cannabis for medical use, as long as patients have registered to obtain their state’s cannabis “card”.
ancient Chinese texts, with references made about its ability to treat gout, rheumatism, constipation, and senility. Chinese Emperor Shennong, who was also a pharmacologist, wrote about using cannabis for treatment purposes in a book published in 2737 BC.

With regard to the United States’ pharmacological system, cannabis was long included as a viable treatment option. It wasn’t until 1937 when, in defiance of the American Medical Association (AMA), the U.S. passed a federal law banning cannabis. According to Americans for Safe Access, from that point on cannabis was only legally available to a small number of patients through a federally organized program called the Investigational New Drug (IND) compassionate access research program. In effect, the IND program allowed patients to receive up to nine pounds of cannabis from the government each year, in 1976.

Despite the IND program, the vast majority of Americans found themselves shut out of access to medical cannabis. Then, in the late 1990s, voters began to demand legalized medical cannabis. California was the first state to establish such a program with a voter initiative that passed in 1996. In the 20 years that have followed the historic passing of California’s proposition 215, other states followed California’s lead, establishing medical cannabis laws that allow patients access to legal cannabis with a doctor’s recommendation.

Today, 29 states and the District of Columbia allow patients to legally obtain and use medical cannabis, bringing potential access to over half of all American citizens. Despite the fact that cannabis continues to remain federally illegal, in October of 2009 the U.S. Department of Justice announced that they would not pursue medical cannabis participants or distributors who comply with state laws.
Alaska, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Hawaii, Illinois, Maine, Maryland, Massachusetts, Michigan, Minnesota, Montana, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Dakota, Ohio, Oregon, Pennsylvania, Rhode Island, Vermont, Washington, and West Virginia. In addition, Washington D.C. and Puerto Rico allow medical cannabis for patients.

Additional states, while not offering comprehensive medical cannabis programs, have approved cannabis- based “low THC, high cannabidiol (CBD)” products for limited medical purposes. These states include Alabama, Georgia, Iowa, Kentucky, Louisiana, Mississippi, Missouri, North Carolina, Oklahoma, South Carolina, Tennessee, Texas, Utah, Virginia, Wisconsin, and Wyoming.

Alternatively, CBD oil products that are derived from hemp are legal to purchase and use under federal law without a visit to a doctor, a medical cannabis card, or paying a state enrollment fee. Individual state laws are dynamic and individual states may govern hemp-derived CBD. In most cases, hemp CBD oil products are legally available.
Alzheimer’s and Parkinson’s diseases
  • Kill or limit the growth of cancer cells
  • Minimize neurological damage following spinal cord and traumatic brain injuries
In addition, cannabis has long been shown to effectively mollify both pain and nausea, making it a potentially powerful therapeutic option for numerous medical conditions and for patients undergoing chemotherapy or traditional AIDS/HIV treatments.

More than 20,000 modern peer-reviewed scientific articles on the pharmacology of cannabis and its cannabinoids have been published by medical journals.

Biotech firms in the U.S. and internationally are currently pursuing the development of cannabis-based medicines aimed at a number of conditions, including epilepsy, psoriasis and eczema, and multiple sclerosis, by isolating specific cannabinoids within the cannabis plant for focused relief.

What if You Can’t Get Legal Cannabis?
If you’re unable to get access to cannabinoids derived from marijuana, you still can obtain CBD hemp oil, the natural botanical extract of the hemp plant. CBD hemp oil can be purchased and used without violating state or federal laws regarding cannabis. Keep in mind that individual state laws are dynamic and individual states may govern hemp-derived CBD.

CBD hemp oil is derived from the hemp plant, a particular variety of cannabis. While you can find hemp oil in many local stores, store-bought hemp oil is usually derived from hemp seeds and doesn’t contain the significant concentration of CBD that pure CBD hemp oil contains.

Hemp oil extracted from the stalk, instead of the seed, is abundant in CBD, as well as essential vitamins, minerals, fatty acids, terpenes, flavonoids, fiber, protein, and other trace cannabinoids. Like medical cannabis, CBD hemp oil products come in a range of applications, like capsules, topicals, vapes, tinctures, energy chews, and even body care products.
 

roots69

Support BGOL
Registered
cannabizmedia.png


Member Blog: The Explosive Growth of California Cannabis Licenses and What Comes Next


We’re more than one year into California’s legal cannabis industry and license growth continued on a fast-rising upward trajectory through the end of 2018. In fact, between November 1, 2018 and December 31, 2018, California issued a total of 6,855 new cannabis licenses according to the Cannabiz Media License Database as people worked extended hours to process the remaining temporary license applications.

To put that number into perspective, California had 4,085 active licenses as of October 31, 2018. During the next 61 days, the state more than doubled that number to 10,940 active licenses on December 31st. You can see the data visually in the chart below.

cannabizmedia.png


Majority of Licenses Granted Went to Cultivators
Of the 6,855 licenses granted in California during November and December 2018, 65% were issued to cultivators by the California Department of Agriculture.

Distributor licenses accounted for 14% of the licenses granted during that two month period, followed by manufacturer licenses at 12%, retailers/dispensaries at 3%, microbusinesses at 3%, delivery businesses at 3%, and testing labs at less than 1%.

Cultivators Continue Stacking Licenses
During the final two months of 2018, 45 license holders gained double digit licenses, which accounted for 24% (1,665) of the 6,855 new licenses issued. One reason for this is because cultivator licenses are skyrocketing as more growers secure multiple small licenses to create large cultivation facilities.

Between November and December 2018, five companies received 729 cultivator licenses, which equates to more than 16% of cultivator licenses granted during that time and nearly 11% of all licenses awarded during that time.

Those five companies are Coyote Hills Agricultural Enterprises (210 new licenses), White Light Farms (173 new licenses), BDZ, Inc. (134 new licenses), Iron Angel II, LLC (133 new licenses), and Busy Bee’s Organics (79 new licenses).

Distributor Licenses Saw the Most Growth in Late 2018
While new cultivator licenses grew by the largest quantity during November and December 2018, new distributor licenses saw the largest growth jump over the previous 10 months of the year.

The number of new distributor licenses issued in December and November 2018 was nearly double the amount granted in the previous 10 months. Manufacturer licenses issued increased by 188%, cultivator licenses by 178%, testing licenses by 68%, and retailer/dispensary licenses by 58%.

What’s Next for California’s Cannabis License Holders?
California has stopped issuing temporary cannabis licenses, and throughout 2019, many of the temporary licenses awarded during 2018 will expire. Each of these temporary licenses will need to become provisional and/or annual licenses in order for the license holders to stay active in California’s cannabis industry.

A few months in 2019 stand out as ones to watch because a large number of temporary licenses will expire. In March, 1,559 licenses will expire. In April, the number of expiring licenses jumps to 4,731, and in July, another 2,453 temporary licenses will expire. During other nine months of 2019, the number of licenses that will expire ranges from three licenses in October to 682 licenses in May.

Clearly, the story of cannabis licensing in California is far from over, and the Cannabiz Media team will be watching closely and tracking all of it in the Cannabiz Media License Database. Follow the link to see more data and insights related to license growth in California during the last two months of 2018.
 

roots69

Support BGOL
Registered
Mistakes.jpg



Member Blog: 5 Mistakes New Cannabusiness Owners Make, And How to Avoid Them


ADVICE FROM DIME BAGS, A LEADER IN THE HEMP SPACE THAT’S BEEN IN THE INDUSTRY FOR OVER A DECADE.
Business is booming for those who are successful in the cannabis industry. With over $9 billion in sales reported for the marijuana industry in 2017, it’s no surprise entrepreneurs are looking to fill the needs of millions of new customers that join the market each year. While the cannabis industry may look like a fail-safe investment to some, those who’ve successfully established themselves in the market know that starting a cannabusiness is nothing short of an enormously challenging feat. Regulatory laws, unforeseen roadblocks with city stipulations and auxiliary businesses, and an oversaturation of the market are some of the many challenges new cannabis business owners face.

With over a decade of first-hand knowledge in the industry, Dime Bags has experienced the many ups and downs of starting and successfully running a business in the hemp market. To save new cannabusinesses the trouble of making these mistakes on their own, we’ve compiled a list of the top five mistakes new cannabis businesses make (and how to avoid them).

Creating Unrealistic Expectations
Inexperienced entrepreneurs look at the cannabis industry and assume that because the marketing is booming and continuing to grow, it’s a fail-safe investment. This couldn’t be further from the truth. Penetrating a saturated market takes substantial dedication to the product or business and a wealth of knowledge of both the industry and regulations. What may look like a fool-proof business plan could completely dissolve with one legality mishap. In addition, a business plan with no passion or knowledge of the industry can easily fall behind in the saturated market of cannabis aficionados who quite literally eat, sleep, and breathe cannabis.

Be passionate about the business you’re starting or investing in and set realistic expectations for growth. While the cannabis industry has plenty of potential for successful ventures, they don’t come without their fair share of complications.

Assuming Other Businesses Are Willing to Work with You
Even in recreationally legal states, cannabis-related products and businesses still constantly face roadblocks in every operational endeavor. Dime Bags creates protective bags for glass transportation and uses hemp to make the fabric of our products. The bags arrive at our warehouse in Colorado Springs already constructed. There is no raw hemp at our building and certainly no cannabis on the premises, yet we’ve faced backlash and pushback from many companies. We’ve been turned down by insurance companies, faced difficulties finding a bank, and even experienced direct pushback from the surrounded storefronts for the product we make and market. Even if you’re starting a business in a recreationally legal state, do not expect others to always welcome you with open arms.

Properly research banks, accounting firms, lawyers, insurance companies, the location of your business and every other possible partnership beforehand to find those who support and are willing to work with cannabis businesses. As long as cannabis remains federally illegal in the United States, cannabusinesses will experience some pushback from other industries who are unwilling to take the risk. However, as public perception shifts and more states become legal, there’s been a noticeable increase in cannabis-friendly ancillary businesses and finding the right partnership is no longer completely impossible.

Not Adapting
As with starting any business, not being adaptable will cause your business to fail. In an industry where everyone’s trying to get in while it’s on the rise — the effects are tenfold. The cannabis industry is constantly changing with the growing market and if you’re not fully committed to adapting with the industry, your business will fail. As the cannabis industry is still so new and not yet worldwide, changes in behavior, attitudes, interests, and trends are moving at a rapid rate.

Stay up-to-date on the latest discoveries in the industry so you can be ahead of the curve for the “next big thing.” Having a solid understanding of the plant itself and the interests of consumers will allow you to recognize trends before they take off. While Dime Bags originally only made bags with hemp, we adapted to expand our line to include smell-proof technology as we recognized the demand from consumers. While it’s important to have a vision and roadmap for your brand, be open to changes in the market and stay on top of trends so you can execute changes before the rest of the industry.

Breaking the Law
While acute knowledge of state and federal regulations is a critical part of any cannabusiness, breaking the law goes beyond the day-to-day operations. Be especially mindful of how your employees and company conduct themselves. While your business may operate according to state laws, that doesn’t always protect you from random searches or anonymous tips given to regulatory officers. If your business hosts a launch party or industry event, ask yourself if on-site consumption is worth losing your business over. That’s not to say that it can’t be done according to the laws for your state, but one underage person caught smoking or someone enjoying a joint outside the front door of your shop could spell serious trouble for you.

Clearly outline your expectations for your employees including how they should conduct themselves at industry events and define the laws and regulations for everyone so there’s a solid understanding of what is legal.

No Back Up-Plan
As Benjamin Franklin famously quoted, “by failing to prepare, you are preparing to fail.” Part of working in the cannabis industry is constantly preparing for the worst. Always have a back-up plan when executing your strategy. The city may revoke a permit for an event you sponsored due to public concern, your packaging may not hold up to new regulatory laws, the possibilities are endless.

While it’s impossible to predict every issue that may arise, have enough capital to handle sticky situations and plan for alternatives before it’s too late. As a general rule of thumb, have at least three months worth operating expenses saved to account for unexpected situations.

The cannabis industry is an exciting and lucrative field for those who prepare and fully dedicate themselves to learning the ins and outs. With national (and hopefully worldwide) legalization on the horizon, it’s set to be one of fastest growing industries over the next decade. By following the advice of those who’ve paved the way, we hope your business has a successful launch in one of the most exciting times for the industry.

Good luck!
 
Top