![]()
the instructions to crack this are similar to the instructions to crack the other autodesk application i posted before.
so read carefully
Autodesk Sketchbook Pro
http://rapidshare.com/files/115683933/ASBP_2009.rar
if there is something you dont understand in the instructions just ask. hopefully you ask before friday because im gone for the weekend
and im quoting someone else and this works:
"First you need to make a folder called c:\flexlm
Copy aw.dat and awkeygen.exe to that folder.
Open aw.dat with notepad and put your mac address where it says your_host
Note: If you don't know how to get your network MAC address you can get your mac address using the licensing utitlity.
Start>Programs>Autodesk>Sketchbook Pro 2009>Licensing
Then open licensing Utility Tasks > then show OP Hardware identifier...Click next ...Next
You will see the 12 Digit number next to the Ethernet card(If you use copy to clipboard you need to remove the first and last digits.) only if you use the button, if you just write it down it is the 12 digits shown.
After you have saved the aw.dat file.
Go to the command prompt( Start>Run>type "cmd" then press enter)
change directory to the flexlm directory "cd\flexlm"
then type "awkeygen.exe aw.dat"
It should not do anything accept skip a line and give no errors.
Finally go back to the licensing utility.
This time select "I have a licence I need to install" Next
Then "I would like to install my licence from a file" Next
Browse to c:\flexlm\aw.dat
It should say installation successful. "
Thanks good brother, I'm gonna try this out!!! If it doesn't work, it wasn't because of your instructions, I probably fucked up somewhere!! I appreciate the effort!!


