lol them shits on sale every month or every other weekend... I noticed Amazon didn't do a prime day
Tech Biz: Amazon releases new $90 Fire HD 8
- Thread starter playahaitian
- Start date
Ipad 7 generation 32gb $279 ..$429 for 128th
Restored Apple iPad Air 3 10.5-inch 64GB Wi-Fi Only Bundle: Case, Pre-Installed Tempered Glass, Rapid Charger, Bluetooth/Wireless Airbuds By 2 Day Express (Refurbished) - Walmart.com
Buy Restored Apple iPad Air 3 10.5-inch 64GB Wi-Fi Only Bundle: Case, Pre-Installed Tempered Glass, Rapid Charger, Bluetooth/Wireless Airbuds By 2 Day Express (Refurbished) at Walmart.com
www.walmart.com
Fire HD 10 Tablet will be on sale for $79.99 for Amazon Prime Day(s) starting tomorrow. Great deal for a very good tablet.
www.aftvnews.com
All the known upcoming deals for Prime Day 2020 — Fire TV, Echo, Fire Tablet, Blink, Ring, and more
Amazon has revealed details on a bunch deals we can expect to see on Prime Day this year, which starts on October 13th. The deals span across most of Amazon's device, including Fire TVs, Fire TV Edition televisions, Echos, Echo Shows, Fire Tablets, Kindles, Blink & Ring security cameras, Eero...
www.aftvnews.com
Fire HD 10 on sale for $79.99 at Best Buy
Just copped two new 10's and two wall mounts to make smart home hubs.
How much the 10s going for right now
What kind of wall mount did you get? I been thinking about doing something similar with my tablets.
Looks nice! You got a link to the wall mount and maybe a YouTube video tutorial?
I don't see anything.
Damn, just looked and this wall mount won't fit my 2019 model Fire 10.Amazon.com
That case came with a flat power cord that fits into the back
You can buy a soldering iron at Walmart for like ten dollars.
Then I cut off the extra part of the power brick to save space in the wall.
Then wrapped the ends with electric tape.
Then I placed my wall mount right above my light switch leaving no gap between the mount and light switch so that the wires will be covered up by the wall mount and the light switch cover. Got the wall mount mounted in place then on the wall mount there is a hole in the back I cut a hole in the wall just large enough to push my power brick into it.
Then remove the wall mount plug the power cord the came with your case into the brick and push the brick into the hole you cut into the wall. Now your black and white wires should be hanging out wire your black wire in with one of the the two wires already on your light switch.
I'm still at work so I had to use the pictures from Amazon to illustrate what I did but remember to make sure that the wall mount is removed because you want to use the wall mount to cover all of the wires when finished.
Once you have your black wire connected to your switch behind the switch is a bunch of white wires all tied together with a orange or red wire nut remove the wire nut and add your white wire from the power brick you soldered in with all the other white wires and screw the wire nut back on to the white wires.
Then just put your switch back in place put the cover back on and put your wall mount on.
Yeah. That wall mount case came with a flat power cord but no power brick. I'm literally at work right now making a second power supply to install the other tablet upstairs when I get home. For me I thought it was easiest to find the smallest power brick that I could and solder a wire to each of the poles.
You can buy a soldering iron at Walmart for like ten dollars.
Hyper Tough 30-Watt Soldering Iron with Stand and Electrical Solder, New - Walmart.com
Buy Hyper Tough 30-Watt Soldering Iron with Stand and Electrical Solder, New at Walmart.com
www.walmart.com
Then I cut off the extra part of the power brick to save space in the wall.
Then wrapped the ends with electric tape.
Then I placed my wall mount right above my light switch leaving no gap between the mount and light switch so that the wires will be covered up by the wall mount and the light switch cover. Got the wall mount mounted in place then on the wall mount there is a hole in the back I cut a hole in the wall just large enough to push my power brick into it.
Then remove the wall mount plug the power cord the came with your case into the brick and push the brick into the hole you cut into the wall. Now your black and white wires should be hanging out wire your black wire in with one of the the two wires already on your light switch.
I'm still at work so I had to use the pictures from Amazon to illustrate what I did but remember to make sure that the wall mount is removed because you want to use the wall mount to cover all of the wires when finished.
Once you have your black wire connected to your switch behind the switch is a bunch of white wires all tied together with a orange or red wire nut remove the wire nut and add your white wire from the power brick you soldered in with all the other white wires and screw the wire nut back on to the white wires.
Then just put your switch back in place put the cover back on and put your wall mount on.
Last edited:
I originally ordered an 2019 model off of etsy for my older tablet but I'm impatient and found them on Amazon with next day delivery and copped those. The one I ordered from etsy still won't be here until Saturday.
The only real difference is the camera hole placement.
Amazon Fire HD 10 Tablet Wall Mount 9th Generation - Etsy
This Tablet & E-Reader Cases item by MakesByMikeStore has 292 favorites from Etsy shoppers. Ships from Mckinney, TX. Listed on Jun 14, 2023
www.etsy.com
I got them from bestbuy for like 130 each.
You definitely have a sweet setup Bruh...kudos.
Amazon to issue refunds as Appstore closes on Android: What to know
The company said discontinuing the Appstore is part of an "ongoing effort to streamline and improve our services and programs."
www.newsweek.com
Similar threads
