{~~~Guns, Guns and Mo' Guns - The Right To Keep And Bear Arms~~~}

Sentra made me do it :money: LOL

15gxyx4.jpg
 
who you telling! this "hobby" is a money pit indeed. :angry:plus the atf shutdown the damn eforms smh you gotta submit everything through paper now.
When did that happen? I know they are down on Wed from 6 to 6. I submitted my PS90 SBR last night and my suppressor today on efile
 
When did that happen? I know they are down on Wed from 6 to 6. I submitted my PS90 SBR last night and my suppressor today on efile

You right they were down earlier today and today is a Thursday. So I searched and found a post saying they pulled it. It's up now about to submit my ish now.
 
who you telling! this "hobby" is a money pit indeed. :angry:plus the atf shutdown the damn eforms smh you gotta submit everything through paper now.

Nah, the eform site was down for maintenance. I just submitted 4 SBR's that I have no plans on finishing anytime soon, and a Mossy SBS that I have a KEG-12 front end for. I'm still waiting on F3's for a Sandman S, Dead Air Mask, Obsidian 45, and SCo Hybrid.....
 
Nah, the eform site was down for maintenance. I just submitted 4 SBR's that I have no plans on finishing anytime soon, and a Mossy SBS that I have a KEG-12 front end for. I'm still waiting on F3's for a Sandman S, Dead Air Mask, Obsidian 45, and SCo Hybrid.....
Wha? Pics man. Idk what those are.
 
What's the quietest suppressor any of you have ever shot or seen shot?
AAC M4-2000 is the quietest that I have shot on a 5.56. Just ordered one.
http://www.silencershop.com/aac-m4-2000.html

There are too many that are too close to really say. especially when shooting subsonic ammo. Silencerco offers a SPEQ discount to Mil/LE that knocks off quite a few $$$$ on their suppressors, but there are many other brands. YHM, Gemtech, Rugged, Sig Sauer, etc... There is also the homemade "solvent trap" suppressors that have to be done on a Form 1 and you build it yourself. I will be ordering a couple of those for future projects.
 
Nah, the eform site was down for maintenance. I just submitted 4 SBR's that I have no plans on finishing anytime soon, and a Mossy SBS that I have a KEG-12 front end for. I'm still waiting on F3's for a Sandman S, Dead Air Mask, Obsidian 45, and SCo Hybrid.....
Where did you find a DA Mask...been looking for one in stock.
 
Nah, the eform site was down for maintenance. I just submitted 4 SBR's that I have no plans on finishing anytime soon, and a Mossy SBS that I have a KEG-12 front end for. I'm still waiting on F3's for a Sandman S, Dead Air Mask, Obsidian 45, and SCo Hybrid.....
Found a Dead Air Mask and also ordered the Dead Air Sandman L. I wanted the Ghost-M but I can't find one in stock. If you happen to see one, Please let me know!!!!
 
I had the light barrel version. Very accurate rifle, but I wanted the SCAR and there are not many aftermarket accessories. Great hunting rifle. I would have kept it if it was the heavy barrel version.
Yeah, I'm looking at the heavy barrel...SCAR is $$$ though and really want to use it hunting. Thanks!
 
About to embark on an AR-15 223/556 build with carbine barrel 16" 1:8 twist. Anyone got any recommendations as far as customization? Are there any good websites out there that you can buy at least matching stocks upper/lower/handguard combos or would it be better to go for individual parts in the colors I want?
 
I had the light barrel version. Very accurate rifle, but I wanted the SCAR and there are not many aftermarket accessories. Great hunting rifle. I would have kept it if it was the heavy barrel version.

Yeah, I'm looking at the heavy barrel...SCAR is $$$ though and really want to use it hunting. Thanks!

I want a SCAR 17 too, but ain't it too loud for hunting?

I read & heard that it's ridiculously loud
 
I want a SCAR 17 too, but ain't it too loud for hunting?

I read & heard that it's ridiculously loud
It's considered loud due to that PWS muzzle brake FN uses.Change the brake and it won't be any louder than any other 308. I am cutting one of my 17S down to 11.5 inches now it's gonna be ridiculously loud being that short but I plan on keeping a suppressor on it majority of the time.
 
Last edited:
Rate this AR15 build so far. Trying not to tip the scales of $1000 for now but have a good idea of whats going in it....

1. Complete Upper w/ NIB BCG and Mil Spec CH (Will be upgrading sometime down the road to a better CH) $ 395
https://www.hardenedarms.com/ecProduct_523_27

2. Forged Lower Repping the Honey Badger :lol:$115
http://www.spikestactical.com/lower-multi-forged-honey-badger-lower-custom-markings-p-1146.html

3. Lower parts group minus trigger group $49
https://dsgarms.com/dsghlpk-nt-001

4. Drop in Trigger $139
http://www.risearmament.com/RA-140-SST

5. MFT Minimualist stock $39
Amazon product ASIN B00XQ1N6F6
6. Buffer tube kit $ 39
http://aeroprecisionusa.com/ar15-buffer-kit.html

7. Pistol Grip $25
http://www.missionfirsttactical.com/Products/Pistol-Grips/ENGAGE-AR15-M16-Pistol-Grip

8. Front and back BU sights $84
Amazon product ASIN B00817B2JW

The sight I'm currently looking at per reviews, warranty, and not costing a kidney. Will make the move to grab a sight by the end of the year. Hopefully come up on a black friday deal. $176
Amazon product ASIN B00HYRGX3K
Anyone had any luck painting their own weapon with cerakote or that aerosol dura-coat?
If anyone has a better sight for around the same price range please let me know. If anyone can add anything I missed and/or some insight it will be greatly appreciated.
 
It's considered loud due to that PWS muzzle brake FN uses.Change the brake and it won't be any louder than any other 308. I am cutting one of my 17S down to 11.5 inches now it's gonna be ridiculously loud being that short but I plan on keeping a suprressor on it majority of the time.
And tell me again how & why you cut 2 of your VEPR 12's barrels down?
 
And tell me again how & why you cut 2 of your VEPR 12's barrels down?

I didn't cut any of my Vepr's down. I bought the 18" and 21" barrel veprs first and bought a factory SBR from Legion https://www.legionusa.com/ It came with a barrel shroud that made it 18" when my form 1 came back I cut the shroud off. I wanted the short barrel to be the host to my Salvo 12 supressor so now I have a fulltime suppressed shotty:gun01:
 
Anyone had any luck painting their own weapon with cerakote or that aerosol dura-coat?
If anyone has a better sight for around the same price range please let me know. If anyone can add anything I missed and/or some insight it will be greatly appreciated.

That's a quality setup, I look back and wish I had built my AR's when I first started. You buy built guns and then swapping parts such as rails or stocks with products you like better when you could go your route and buy exactly what you want initally. Not sure how you're gonna use the rifle but only thing I didn't notice was a forend grip or bipod. But then again you may not use either with whatever your plans are or shooting style is.

I thought about doing my own cerakote but one part of me is like just let somebody who does it everyday do it. It's almost like cooking, I can cook and am good at it, but some days I just wanna eat and get up and leave. Somebody else is doing the dishes and cleaning up LOL thats how I feel about cerakoting my guns...post pics when you get it ready to go.
 
I didn't cut any of my Vepr's down. I bought the 18" and 21" barrel veprs first and bought a factory SBR from Legion https://www.legionusa.com/ It came with a barrel shroud that made it 18" when my form 1 came back I cut the shroud off. I wanted the short barrel to be the host to my Salvo 12 supressor so now I have a fulltime suppressed shotty:gun01:
Never knew they had them in different barrel lengths. Seems like all the ones I see now are 19" barrels
 
Back
Top