Pandora's box has been opened. I'm about to have some fun.
***DAMN...What did Lonestar get banned for?***
- Thread starter ClevelandDawg216
- Start date
Lying ass. How was she able to PM me TODAY if you did that? You a damn fool and sensitive.
Oh yeah... and you're the ho. Or at least you were pretending to be yesterday typing that silliness under your screen name.
ha ha she/he got dealt with and doesn't know how to respond....
trust my ways of making you look like a fool are far more subtle...no need to even pretend to be someone else...
Femme, what about UpTownHarlem? You banned his ass because he showed a pic of Borat that just so happened to be naked. Now if it was some random dude jerkin' off then it would be suspect, but Borat?? I know you did it to make a point, but I'm sorry, UpTownHarlem is not a FTP and never was. That's why you removed the ban quick.
Anyway, I was also just trying to prove a point. I'm glad that Lady Scorpio and you handled the situation with class and maturity with the new rules set up about Mods on this side handling shit. Thank you for that.
What's really good? You've been doing a lot of poppin' off at the mouth lately, and most of the shit's been uncalled for. You've been saying a lot of suspect shit on the sly about me, best believe I do have other ears and eyes besides my own.
I really don't care for e-beef, but if you want to resort to that shit, there's a reason why my name is Onslaught.
Sometimes I think you just need to chill...
NOW GO TO YOUR CORNER AND SHUT THE FUCK UP!!!!
If you hadn't opened your fucking font to type "followup" I wouldn't have had shit to say to you. I don't see what me addressing Da Con has to do with you and by the time you flew yourself into this thread I had already stopped posting here. I don't really have a problem with you, but please take your own advice.
This board is fucking hilarious I swear.
Welcome to my world bro.....
Fuk the bullshit we havent talked in a while how are you doing? How's school?
@ this thread.
I was de-moderated for much less.
**to the shadows I return**
for changing thread titles?
How to Design, Plan and Build a Deck
Planning is a crucial step in any construction project. A good plan serves as a reference throughout the project. Use the following suggestions to help with the planning process:
1. Determine where you want the deck. What are the critical dimensions? (length, width and height) Are stairs necessary? If so, where will they go?
2. There are a few ways you can plan your deck:
* Use graph paper to sketch a scaled drawing. Use the drawing to generate a materials list.
* Go to your local Lowe's. Give the critical dimensions of the deck to an associate at the project desk. The associate can generate a complete project guide for you. A complete project guide includes: a Lowe's project planning guide, plan view, dimensioned plan view, post layout view, dimensional view and a complete materials list. Complete package pricing is also available.
* Use our Deck Design Tool to custom design your new deck.
3. Take the project guide to your local building inspector. The inspector reviews the plans and advises you of any changes that are needed. The inspector also advises you of any special permits and building requirements for your area. Take notes and ask for copies of special instructions pertaining to your project. Find out what inspections are required for the project. Make sure you know the procedures for setting inspection dates. Spend extra time planning and gathering information to prevent making changes in the later stages of the project.
# Mark the elevation for the finished deck surface. Keep in mind that most deck surfaces run 2" to 3" below the bottom of the door sill. Measure down to account for the thickness of your decking material and make another mark. This mark represents the top of your ledger board. Measure down again for the width of your ledger board and make a mark. This mark represents the bottom of the ledger board and the top of the beam.
#
Water Level.
Example of a water level.
Using a water level, transfer each of the three marks to the left and right edges of the deck. Snap chalk lines to represent the top and bottom of the ledger board.
# Partially drive nails into the wall, even with the left and right edges of the proposed deck. If the elevation is too high to work with comfortably, use a level to transfer a mark 2' to 3' off the ground, then partially drive nails at the marks.
# Drive batterboards into the ground approximately 2' past the proposed deck depth. Center the batterboards on the left and right edge marks for the deck. Use a tape measure squared to the house to determine the location of each batterboard. The crosspiece of each batterboard should be parallel to the house.
#
3-4-5 Triangle.
3, 4, 5 Method.
Use the 3,4,5 method to check for square. Cut a piece of mason's cord approximately 3' longer than the proposed deck depth. Tie one end of the cord to the nail marking the left edge of the deck. Have a helper pull the cord to the batterboard. Use the following method to square the cord to the wall. Measure 3' along the house and mark that spot on the wall. Measure 4' from the house along the cord and mark the spot with tape. Measure between the two reference marks. Adjust the cord on the batterboard until the distance is 5'. Drive a nail into the batterboard and tie the cord to it. Attach a line level to the cord, and move the batterboard up or down as needed to level the cord. Make sure the cord is square with the house. You now have a level line squared to the house. Perform the same steps on right edge of the deck.
Deck Layout Lines.
Layout lines.
# Measure the proposed deck width, minus 1', from the wall along the cords on the left and right edges of the deck and mark them. Drive in batterboards 3' outside of the two existing layout lines. Cut a piece of mason's cord and tie it to the two new batterboards. The cord should intersect the marks you made for the proposed deck width on each of the first two cords. Adjust the batterboards so the last cord you tied just barely touches the tops of the left and right edge cords.
# You now have three squared and level lines. The corners where these lines meet represent the outside edges of the corner posts. The local building inspector can tell you how many posts you need and the maximum distance allowed between them. Mark the ground with stakes or spray paint where you need to dig footings for the posts. Untie and save the mason's cords. They will be useful later when you stand the posts.
1. Dig your footings so they reach below the frost line. Your local building inspector can give you the information you need pertaining to the depth, diameter and shape of your footings. Some codes may require the bottom of a footing be wider than the top.
2. Use posthole diggers or a power auger to dig the footing holes. It takes two people to handle a power auger, so if you choose this option, get a helper.
Screeding concrete with a board.
Screeding concrete inside a form.
3. After the building inspector approves the footing holes, you are ready to pour concrete. At this point, decide whether to use tubular concrete forms or pour the concrete directly into the holes. If you elect not to use a form, you can still obtain a professional-looking finish. Place a 4" or 5" section of a form over the exposed portion of the footing and then level the concrete with a board. Work the board back and forth as you pull it across the top of the form. Leveling concrete in this manner is called screeding. You must also decide whether to order concrete or mix it yourself. The determining factor will be how much concrete you need.
4. To determine the number of 60 lb. bags needed to fill a 12" diameter hole, divide the depth of the hole in inches by 9. To determine the number of bags needed to fill all the footing holes, multiply the number needed to fill one hole by the number of holes.
D= depth of hole in inches
N= number of bags per hole
H= total number of holes
T= total number of bags
D / 9 = N
N x H = T
J-bolt in Concrete Footing.
Poured footing with J-bolt.
5. Fill the holes with concrete and screed the tops level. Replace the mason's cords and use a plumb bob to find the centers for each post. Set J-bolts in the wet concrete. Leave about 3/4" of the threaded portion sticking up where the post centers will be. Allow the concrete to set. Depending on the size of the holes, it may take up to three days for the concrete to set.
Hanging the Ledger Board
1. Lumber is usually 1/2" to 1" longer than its stated length. The extra length allows you to square boards and maintain their nominal length. Cut the ledger board, ribbon joist and the two boards for the beam to the required length. Use a combination or framing square to mark the ends before you cut them. The ledger board, ribbon joist and the boards for the beam should be the same length.
WoodWorks.
2. To mark the joist locations, lay the four boards you just cut across two sawhorses with the crown edges facing you. Most boards have a slight bow to one edge. The high side of the bow is called the crown or crown edge. Align the crown edges and ends of the boards and clamp them together securely. Measure in 1 1/2" from the left side of the boards and make a reference mark. Put an "X" to the right of the mark. Measure in 15 1/4" from the left side of the boards. Make a reference mark and put an "X" to the right of it. After these first two measurements, continue marking the boards every 16" until you run out of board. Hook your tape measure on the left edge of the boards. There should be marks at 1 1/2", 15 1/4", 31 1/4", 47 1/4", 63 1/4", 79 1/4", etc. Measure in 1 1/2" from the right side of the boards. Make a reference mark and put an "X" on the left side of the mark. Each mark represents the edge of a joist. Each "X" denotes the side of the mark where the joist attaches.
3. Transfer the reference marks and "X"s to the other three boards. Unclamp the boards and transfer the reference marks and "X"s from the edges to the faces of the ledger board and the ribbon joist.
4. Attach joist hangers to the ledger boardand the ribbon joist. Align the inside edge of the joist hanger with the reference mark on the face of the board. You should be able to see the "X" inside the joist hanger. Once aligned, screw or nail the joist hanger to the board. Use a piece of scrap joist material to fit the joist hangers as you go.
Ledger board.
Installed ledger board.
5. If the house has wood siding, use a circular saw to cut along the chalk lines for the top and bottom of the ledger board. Make sure the blade is only set deep enough to cut through the siding. If the house has aluminum or vinyl siding, use a fine-toothed plywood blade installed backwards to avoid chipping or tearing the siding. For stucco or other masonry sidings, there are specialty blades available. After the siding is cut, pry it from the wall. Use a chisel to clean up any ragged edges.
6. Install "Z" flashing behind the siding for the entire length of the ledger board. "Z" flashing is standard, preformed metal flashing that fits behind the siding and over the ledger board. If the ledger is too long for one piece of flashing to cover, leave a 3" overlap where the pieces meet. Remember to run a thick bead of polyurethane or silicone caulk in the joint between the siding and flashing.
7. Drill 3/8" pilot holes through the ledger board for the 3/8" x 4" lag screws that will secure the ledger board to the house. Space the pilot holes approximately 24" apart. Stagger one 2" from the top of the ledger board and the next 2" from the bottom of the ledger board.
8. Bolt ledger board to the house.
9. Fill the pilot holes with silicone or polyurethane caulk. Slip a fender washer over the lag bolt, and drive it until you feel the bolt take hold in the house's rim joist. Use a socket and ratchet to finish tightening the lag screw. Repeat this process until all of the lag bolts are installed.
Setting the Posts and Beam
1. Once the concrete footings have hardened, secure the standoff post anchor (also called a metal post hanger) to the J-bolt with a nut and washer. Stand the post in the post anchor. Plumb the post with a 4' level. Brace the post and fasten it to the post anchor. Use a water level to mark the post where it reaches the bottom of the ledger board. Use a combination or framing square to mark the post on all four sides. Cut the post level with the bottom of the ledger board. Use a square to mark the post for the beam notch. The notch should face away from the house and be 3" wide and as deep as the width of the beam. To cut the beam notch, start with a circular saw and finish with a hand saw.
Beam.
Installed beam.
2. Screw or nail the two beam boards together flush, with the crown edges facing the same direction. The screws or nails should be in rows of three, spaced approximately 24" apart, and driven in from alternate sides to ensure that the boards do not separate.
3. Set the beam in the beam notches and center it on the posts. Run a screw through the back of the post into the beam to hold it temporarily. Square and cut two of the joist boards to the required length. Place one of the joists in the far left joist hanger and one in the far right joist hanger. Remember to put the joists in place with the crown edges up. Lay the joists across the beam and line them up with the reference marks on the top of the beam. Use the 3, 4, 5 method to check for square. Once the beam and joists are square, toenail the joists to the beam and screw or nail the joists to the joist hangers on the ledger board.
4. Install the ribbon joist over the ends of the two joists.
5. Starting from the face of the beam, drill two offset 1/2" holes through each post. Use 1/2"x 6" carriage bolts to secure the beam to the posts. Place the nut and washer facing the house.
Installing Intermediate Joists and Decking
1. Square and cut all the remaining joist boards to the required length.
2. Fasten joist boards to the outside of the left and right joists. Toenail them to the ledger board, beam and ribbon joist. Fasten the double joists together the same way you did the boards for the beam.
3. Slide the next joist into the joist hangers on the ledger board and ribbon joist. Fasten each end of the joist to the joist hangers and toenail it to the beam. Continue this process until all the joists are in place.
4. When you begin laying the decking, it is a good idea to lay a couple of pieces of plywood on top of the deck about 2' from the wall. The plywood gives you a good working platform until there is enough decking from which to work.
5. Lay the decking so it runs across the joists and parallel to the house. Remember to lay the decking with the crown side up. Cut the first deck board to match the deck length. If the deck is longer than the deck boards, line up the left edge of the decking with the outside of the left joist. The right edge of the decking board should fall on the center of one the intermediate joists. Butt the decking board tightly against the house and screw or nail it in place. Put two fasteners in the decking each time it crosses a joist, about 1" from the edge of each deck board. Butt a second decking board against the edge of the first one. Mark the second board even with the outside of the far right joist. Cut the second decking board and fasten it to the joists. For aesthetic purposes, stagger the joints where the decking boards meet.
Decking.
Decking installed.
6. Lightly tack a 16d nail into each joist tight against the first deck board. The nails ensure even spacing between boards. Line up the left edge of the next board with the first one. Push the board tightly against the nails and fasten it to the joists. Continue this process until the entire frame is covered with decking.
7. There will probably be some uneven or overhanging boards on the right side of the deck. Make a mark on the board farthest from the house just outside the far right joist. Snap a chalk line to the right edge of the first deck board. Use a circular saw to cut along the chalk line.
Installing Railings
1. The requirements for railings vary between locations. See the local building inspector for the following information:
* Maximum distance allowed between railing posts
* Required railing height
* Maximum height allowed for the bottom rail
* Maximum distance allowed between rail pickets
Deck Railing With Posts.
Posts and cap rails installed
2. Determine the number of railing posts you need. You will need one for each corner where the deck butts against the house and 2 for each outside corner. To determine the number of intermediate posts required for each side, measure the distance between two corner posts, divide by the distance allowed between posts, round any fraction up to the next whole number, and subtract one. For example, if the distance between corner posts is 9' and the distance allowed between posts is 5':
9 / 5 = 1.8 which rounds up to 2
2 - 1 = 1 intermediate post between these corner posts
Repeat this process between each set of corner posts and add the totals to determine the total number of intermediate railing posts you need.
3. The overall height of the railing is determined by local code. The building inspector can provide you with this information. For example, we'll use 36 inches from the top of the finished deck to the top of the rail. Cut 4x4 posts to length, overall railing height plus flooring thickness plus joist width minus cap rail thickness. In this case:
36" + 1" + 7 1/4" - 1 1/2" = 42 3/4".
The railing posts in this example would be cut to 42 3/4"
Deck Railing With Pickets.
Pickets installed.
4. Install the corner posts 8" in from the corners. Have a helper hold the post flush with the bottom of the joist while you drill a 1/2" hole through the post and joist. Use a 1/2"x7" carriage bolt to secure the post to the joist. Plumb the post, drill a second 1/2" hole through the post and joist, and use another 1/2"x7" carriage bolt to stabilize the post. Repeat these steps until all the corner posts are installed. Install the intermediate posts evenly spaced between the corner posts. Remember there can be less than maximum distance allowed between posts, but not more.
5. Install the 2x4 top and bottom rails. Secure the bottom rail 3 1/2" inches up from the top of the deck. Put scrap pieces of 2x4 block against each post and rest the bottom railing on top of them. Nail the bottom rail in place. Secure the top rail flush with the top of the posts. Let the top and bottom rails extend past each corner post and fasten them where they meet.
6. Center the 2x6 cap rail over the posts and nail in place.
7. Attach the pickets, (2x2) butted against the bottom of the cap rail and flush with the bottom of the bottom rail.
8. To give the pickets a more finished look, cut the bottoms at a 45-degree angle. A miter saw speeds up this task.
Planning is a crucial step in any construction project. A good plan serves as a reference throughout the project. Use the following suggestions to help with the planning process:
1. Determine where you want the deck. What are the critical dimensions? (length, width and height) Are stairs necessary? If so, where will they go?
2. There are a few ways you can plan your deck:
* Use graph paper to sketch a scaled drawing. Use the drawing to generate a materials list.
* Go to your local Lowe's. Give the critical dimensions of the deck to an associate at the project desk. The associate can generate a complete project guide for you. A complete project guide includes: a Lowe's project planning guide, plan view, dimensioned plan view, post layout view, dimensional view and a complete materials list. Complete package pricing is also available.
* Use our Deck Design Tool to custom design your new deck.
3. Take the project guide to your local building inspector. The inspector reviews the plans and advises you of any changes that are needed. The inspector also advises you of any special permits and building requirements for your area. Take notes and ask for copies of special instructions pertaining to your project. Find out what inspections are required for the project. Make sure you know the procedures for setting inspection dates. Spend extra time planning and gathering information to prevent making changes in the later stages of the project.
# Mark the elevation for the finished deck surface. Keep in mind that most deck surfaces run 2" to 3" below the bottom of the door sill. Measure down to account for the thickness of your decking material and make another mark. This mark represents the top of your ledger board. Measure down again for the width of your ledger board and make a mark. This mark represents the bottom of the ledger board and the top of the beam.
#
Water Level.
Example of a water level.
Using a water level, transfer each of the three marks to the left and right edges of the deck. Snap chalk lines to represent the top and bottom of the ledger board.
# Partially drive nails into the wall, even with the left and right edges of the proposed deck. If the elevation is too high to work with comfortably, use a level to transfer a mark 2' to 3' off the ground, then partially drive nails at the marks.
# Drive batterboards into the ground approximately 2' past the proposed deck depth. Center the batterboards on the left and right edge marks for the deck. Use a tape measure squared to the house to determine the location of each batterboard. The crosspiece of each batterboard should be parallel to the house.
#
3-4-5 Triangle.
3, 4, 5 Method.
Use the 3,4,5 method to check for square. Cut a piece of mason's cord approximately 3' longer than the proposed deck depth. Tie one end of the cord to the nail marking the left edge of the deck. Have a helper pull the cord to the batterboard. Use the following method to square the cord to the wall. Measure 3' along the house and mark that spot on the wall. Measure 4' from the house along the cord and mark the spot with tape. Measure between the two reference marks. Adjust the cord on the batterboard until the distance is 5'. Drive a nail into the batterboard and tie the cord to it. Attach a line level to the cord, and move the batterboard up or down as needed to level the cord. Make sure the cord is square with the house. You now have a level line squared to the house. Perform the same steps on right edge of the deck.
Deck Layout Lines.
Layout lines.
# Measure the proposed deck width, minus 1', from the wall along the cords on the left and right edges of the deck and mark them. Drive in batterboards 3' outside of the two existing layout lines. Cut a piece of mason's cord and tie it to the two new batterboards. The cord should intersect the marks you made for the proposed deck width on each of the first two cords. Adjust the batterboards so the last cord you tied just barely touches the tops of the left and right edge cords.
# You now have three squared and level lines. The corners where these lines meet represent the outside edges of the corner posts. The local building inspector can tell you how many posts you need and the maximum distance allowed between them. Mark the ground with stakes or spray paint where you need to dig footings for the posts. Untie and save the mason's cords. They will be useful later when you stand the posts.
1. Dig your footings so they reach below the frost line. Your local building inspector can give you the information you need pertaining to the depth, diameter and shape of your footings. Some codes may require the bottom of a footing be wider than the top.
2. Use posthole diggers or a power auger to dig the footing holes. It takes two people to handle a power auger, so if you choose this option, get a helper.
Screeding concrete with a board.
Screeding concrete inside a form.
3. After the building inspector approves the footing holes, you are ready to pour concrete. At this point, decide whether to use tubular concrete forms or pour the concrete directly into the holes. If you elect not to use a form, you can still obtain a professional-looking finish. Place a 4" or 5" section of a form over the exposed portion of the footing and then level the concrete with a board. Work the board back and forth as you pull it across the top of the form. Leveling concrete in this manner is called screeding. You must also decide whether to order concrete or mix it yourself. The determining factor will be how much concrete you need.
4. To determine the number of 60 lb. bags needed to fill a 12" diameter hole, divide the depth of the hole in inches by 9. To determine the number of bags needed to fill all the footing holes, multiply the number needed to fill one hole by the number of holes.
D= depth of hole in inches
N= number of bags per hole
H= total number of holes
T= total number of bags
D / 9 = N
N x H = T
J-bolt in Concrete Footing.
Poured footing with J-bolt.
5. Fill the holes with concrete and screed the tops level. Replace the mason's cords and use a plumb bob to find the centers for each post. Set J-bolts in the wet concrete. Leave about 3/4" of the threaded portion sticking up where the post centers will be. Allow the concrete to set. Depending on the size of the holes, it may take up to three days for the concrete to set.
Hanging the Ledger Board
1. Lumber is usually 1/2" to 1" longer than its stated length. The extra length allows you to square boards and maintain their nominal length. Cut the ledger board, ribbon joist and the two boards for the beam to the required length. Use a combination or framing square to mark the ends before you cut them. The ledger board, ribbon joist and the boards for the beam should be the same length.
WoodWorks.
2. To mark the joist locations, lay the four boards you just cut across two sawhorses with the crown edges facing you. Most boards have a slight bow to one edge. The high side of the bow is called the crown or crown edge. Align the crown edges and ends of the boards and clamp them together securely. Measure in 1 1/2" from the left side of the boards and make a reference mark. Put an "X" to the right of the mark. Measure in 15 1/4" from the left side of the boards. Make a reference mark and put an "X" to the right of it. After these first two measurements, continue marking the boards every 16" until you run out of board. Hook your tape measure on the left edge of the boards. There should be marks at 1 1/2", 15 1/4", 31 1/4", 47 1/4", 63 1/4", 79 1/4", etc. Measure in 1 1/2" from the right side of the boards. Make a reference mark and put an "X" on the left side of the mark. Each mark represents the edge of a joist. Each "X" denotes the side of the mark where the joist attaches.
3. Transfer the reference marks and "X"s to the other three boards. Unclamp the boards and transfer the reference marks and "X"s from the edges to the faces of the ledger board and the ribbon joist.
4. Attach joist hangers to the ledger boardand the ribbon joist. Align the inside edge of the joist hanger with the reference mark on the face of the board. You should be able to see the "X" inside the joist hanger. Once aligned, screw or nail the joist hanger to the board. Use a piece of scrap joist material to fit the joist hangers as you go.
Ledger board.
Installed ledger board.
5. If the house has wood siding, use a circular saw to cut along the chalk lines for the top and bottom of the ledger board. Make sure the blade is only set deep enough to cut through the siding. If the house has aluminum or vinyl siding, use a fine-toothed plywood blade installed backwards to avoid chipping or tearing the siding. For stucco or other masonry sidings, there are specialty blades available. After the siding is cut, pry it from the wall. Use a chisel to clean up any ragged edges.
6. Install "Z" flashing behind the siding for the entire length of the ledger board. "Z" flashing is standard, preformed metal flashing that fits behind the siding and over the ledger board. If the ledger is too long for one piece of flashing to cover, leave a 3" overlap where the pieces meet. Remember to run a thick bead of polyurethane or silicone caulk in the joint between the siding and flashing.
7. Drill 3/8" pilot holes through the ledger board for the 3/8" x 4" lag screws that will secure the ledger board to the house. Space the pilot holes approximately 24" apart. Stagger one 2" from the top of the ledger board and the next 2" from the bottom of the ledger board.
8. Bolt ledger board to the house.
9. Fill the pilot holes with silicone or polyurethane caulk. Slip a fender washer over the lag bolt, and drive it until you feel the bolt take hold in the house's rim joist. Use a socket and ratchet to finish tightening the lag screw. Repeat this process until all of the lag bolts are installed.
Setting the Posts and Beam
1. Once the concrete footings have hardened, secure the standoff post anchor (also called a metal post hanger) to the J-bolt with a nut and washer. Stand the post in the post anchor. Plumb the post with a 4' level. Brace the post and fasten it to the post anchor. Use a water level to mark the post where it reaches the bottom of the ledger board. Use a combination or framing square to mark the post on all four sides. Cut the post level with the bottom of the ledger board. Use a square to mark the post for the beam notch. The notch should face away from the house and be 3" wide and as deep as the width of the beam. To cut the beam notch, start with a circular saw and finish with a hand saw.
Beam.
Installed beam.
2. Screw or nail the two beam boards together flush, with the crown edges facing the same direction. The screws or nails should be in rows of three, spaced approximately 24" apart, and driven in from alternate sides to ensure that the boards do not separate.
3. Set the beam in the beam notches and center it on the posts. Run a screw through the back of the post into the beam to hold it temporarily. Square and cut two of the joist boards to the required length. Place one of the joists in the far left joist hanger and one in the far right joist hanger. Remember to put the joists in place with the crown edges up. Lay the joists across the beam and line them up with the reference marks on the top of the beam. Use the 3, 4, 5 method to check for square. Once the beam and joists are square, toenail the joists to the beam and screw or nail the joists to the joist hangers on the ledger board.
4. Install the ribbon joist over the ends of the two joists.
5. Starting from the face of the beam, drill two offset 1/2" holes through each post. Use 1/2"x 6" carriage bolts to secure the beam to the posts. Place the nut and washer facing the house.
Installing Intermediate Joists and Decking
1. Square and cut all the remaining joist boards to the required length.
2. Fasten joist boards to the outside of the left and right joists. Toenail them to the ledger board, beam and ribbon joist. Fasten the double joists together the same way you did the boards for the beam.
3. Slide the next joist into the joist hangers on the ledger board and ribbon joist. Fasten each end of the joist to the joist hangers and toenail it to the beam. Continue this process until all the joists are in place.
4. When you begin laying the decking, it is a good idea to lay a couple of pieces of plywood on top of the deck about 2' from the wall. The plywood gives you a good working platform until there is enough decking from which to work.
5. Lay the decking so it runs across the joists and parallel to the house. Remember to lay the decking with the crown side up. Cut the first deck board to match the deck length. If the deck is longer than the deck boards, line up the left edge of the decking with the outside of the left joist. The right edge of the decking board should fall on the center of one the intermediate joists. Butt the decking board tightly against the house and screw or nail it in place. Put two fasteners in the decking each time it crosses a joist, about 1" from the edge of each deck board. Butt a second decking board against the edge of the first one. Mark the second board even with the outside of the far right joist. Cut the second decking board and fasten it to the joists. For aesthetic purposes, stagger the joints where the decking boards meet.
Decking.
Decking installed.
6. Lightly tack a 16d nail into each joist tight against the first deck board. The nails ensure even spacing between boards. Line up the left edge of the next board with the first one. Push the board tightly against the nails and fasten it to the joists. Continue this process until the entire frame is covered with decking.
7. There will probably be some uneven or overhanging boards on the right side of the deck. Make a mark on the board farthest from the house just outside the far right joist. Snap a chalk line to the right edge of the first deck board. Use a circular saw to cut along the chalk line.
Installing Railings
1. The requirements for railings vary between locations. See the local building inspector for the following information:
* Maximum distance allowed between railing posts
* Required railing height
* Maximum height allowed for the bottom rail
* Maximum distance allowed between rail pickets
Deck Railing With Posts.
Posts and cap rails installed
2. Determine the number of railing posts you need. You will need one for each corner where the deck butts against the house and 2 for each outside corner. To determine the number of intermediate posts required for each side, measure the distance between two corner posts, divide by the distance allowed between posts, round any fraction up to the next whole number, and subtract one. For example, if the distance between corner posts is 9' and the distance allowed between posts is 5':
9 / 5 = 1.8 which rounds up to 2
2 - 1 = 1 intermediate post between these corner posts
Repeat this process between each set of corner posts and add the totals to determine the total number of intermediate railing posts you need.
3. The overall height of the railing is determined by local code. The building inspector can provide you with this information. For example, we'll use 36 inches from the top of the finished deck to the top of the rail. Cut 4x4 posts to length, overall railing height plus flooring thickness plus joist width minus cap rail thickness. In this case:
36" + 1" + 7 1/4" - 1 1/2" = 42 3/4".
The railing posts in this example would be cut to 42 3/4"
Deck Railing With Pickets.
Pickets installed.
4. Install the corner posts 8" in from the corners. Have a helper hold the post flush with the bottom of the joist while you drill a 1/2" hole through the post and joist. Use a 1/2"x7" carriage bolt to secure the post to the joist. Plumb the post, drill a second 1/2" hole through the post and joist, and use another 1/2"x7" carriage bolt to stabilize the post. Repeat these steps until all the corner posts are installed. Install the intermediate posts evenly spaced between the corner posts. Remember there can be less than maximum distance allowed between posts, but not more.
5. Install the 2x4 top and bottom rails. Secure the bottom rail 3 1/2" inches up from the top of the deck. Put scrap pieces of 2x4 block against each post and rest the bottom railing on top of them. Nail the bottom rail in place. Secure the top rail flush with the top of the posts. Let the top and bottom rails extend past each corner post and fasten them where they meet.
6. Center the 2x6 cap rail over the posts and nail in place.
7. Attach the pickets, (2x2) butted against the bottom of the cap rail and flush with the bottom of the bottom rail.
8. To give the pickets a more finished look, cut the bottoms at a 45-degree angle. A miter saw speeds up this task.
Shane I should beat your ass.
Shane I should beat your ass.
Whats wrong SS you dont want to build a deck for summertime enjoyment?
Lady, I don't keep track of where you post. I just see a lot of random caping up by you almost every time I enter a thread...Oh, and I'm not talking about a dude...
Please step away from the cape.....
Last edited:
I feel you MG.
I'm doing pretty good. School is fine, I wrapped this year up pretty nicely, just got to keep focused and disciplined. Like "The Ghost" said, "Discipline and dedication..."How you been?
I feel you MG.
How you been?
I've been chilling. Thanks for asking and good luck with school.
Whats wrong SS you dont want to build a deck for summertime enjoyment?
You know doggish, I have a decklette (lolz) and I'm thinking about extending it overlooking a small zen garden. Thank you Shane.
More bbq/Less E-beef.
Izayoi, when I come back from New Zealand, we gonna have to have a cookout.
uhmm and where is my invite GP
Peace
Your very welcome.
An don't you think it's time for the training wheels to fall off and instead of a, " Decklette " you step up to a full grown, heavy duty, EXTENDABLE, reinforced railing, " DECK " structure.
I'm an OAK man myself Izzy. It's a firm wood, stain resident, long lasting, and always has a great finish!!!
Are you an Oak woman Izzy?
Your very welcome.
An don't you think it's time for the training wheels to fall off and instead of a, " Decklette " you step up to a full grown, heavy duty, EXTENDABLE, reinforced railing, " DECK " structure.
I'm an OAK man myself Izzy. It's a firm wood, stain resident, long lasting, and always has a great finish!!!
Are you an Oak woman Izzy?
Your very welcome.
An don't you think it's time for the training wheels to fall off and instead of a, " Decklette " you step up to a full grown, heavy duty, EXTENDABLE, reinforced railing, " DECK " structure.
I'm an OAK man myself Izzy. It's a firm wood, stain resident, long lasting, and always has a great finish!!!
Are you an Oak woman Izzy?
oh dear.....*waits for Izzy's reply....
Why haven't this thread been deleted yet?
hmmmm maybe cuz we keep replying in it??
seems a lil obvious yes.If yall want it gone then so be it. Then that would mean there would be a whole lotta threads that should be deleted as well. Don't you agree Mcguyver?
Pick one's battles carefully yes...
peace
hmmmm maybe cuz we keep replying in it??
If yall want it gone then so be it. Then that would mean there would be a whole lotta threads that should be deleted as well. Don't you agree Mcguyver?
Pick one's battles carefully yes...
peace
Alot of threads like what? Maaaannnn delete this shit this thread had no purpose though it was somewhat entertaining for a quick sec.
If the thread starter so desires then I have no problem deleting it. However, like I said and will not repeat again the thread now has 5 pages. Why?? Because its dramatic and it seems that is where its at. Yes??
Its yall board do what you want. But I have an excellent memory, all the ones you deleted in the past. Judging from all the others saying its childish and the numerous attempts to change the subject, the board rules.........aw fuk it leave it up.
Mcguyver say what you want but you enjoy this dramatic ish....I deleted your thread cuz you know why so whatever this excellent memory of yours conjures so be it.
I have no issues with you so whatever your problem is its all good. Peace n love always.